Inhaltszusammenfassung zur Seite Nr. 1
MODEL
VIZIO
SB4020E-A0-NA
QUICK
START
GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
IMpOrtANt SAfEty INfOrMAtION Your Sound Bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Sound Bar and or fire. To prevent your Sound Bar from being damaged, the following rules should be observed for its installation, use, and to protect it from overheating, be sure these openings are not blocked or covere
Inhaltszusammenfassung zur Seite Nr. 3
pACKAGE CONtENtS Sound Bar MODEL SB4021E-A0 VIZIO QUICK SUB- MUTE SUB+ START GUIDE SRS SRS TVOL TSHD power Adapter with Cable remote Control this Quick Start Guide with Battery Wall Mount Brackets Wall Mount template Stereo rCA to 3.5mm Audio Cable Cables may vary slightly from those shown.
Inhaltszusammenfassung zur Seite Nr. 4
CONNECtIONS BOttOM Of SOUND BAr Located on Side power port Aux Input Aux Input (Stereo 3.5mm) (Stereo rCA) Service port Sub Out Optical Input (for Service technician Only) (rCA)
Inhaltszusammenfassung zur Seite Nr. 5
fIrSt- tIME SEtUp 1 AUDIO OUT AUDIO OUT BACK Of yOUr tV* CHOOSE A METHOD Connect the included Stereo Cable to a tV audio output as shown. BOttOM Of SOUND BAr *Not all tVs have the audio outputs shown above. to connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
Inhaltszusammenfassung zur Seite Nr. 6
2 3 4
Inhaltszusammenfassung zur Seite Nr. 7
5 Sound Bar is centered When using the remote, below the tV. point it at the center of the Sound Bar. the sensor is located there. for the best surround sound experience, position the Sound Bar as shown.* the Sound Bar should be close to ear level.
Inhaltszusammenfassung zur Seite Nr. 8
6 Gently pull the plastic tab from the back of the remote control. (the plastic tab can be thrown away) 7 power turn your tV on, then press the Power button on the remote to turn the Sound Bar on. press the Input button to cycle through the audio inputs. SUB- MUTE SUB+ for example, if you connected your tV to Aux 1, set the Sound Bar to Aux 1. Setup is complete. Input SRS SRS TVOL TSHD
Inhaltszusammenfassung zur Seite Nr. 9
USING tHE rEMOtE Power press to turn on or off. Volume Up press to increase volume. Mute Sub Volume Up press to mute. MUTE SUB+ SUB- press to increase subwoofer volume. Sub Volume Down (When optional SUB Out is used) press to decrease subwoofer volume. Volume Down (When optional SUB Out is used) press to decrease subwoofer volume. SRS TVOL SRS TSHD press to enable/disable SrS truVolume. SRS SRS TVOL TSHD press to enable/disable Input SrS truSurround HD press to change input source. When
Inhaltszusammenfassung zur Seite Nr. 10
INDICAtOr LEDS LED Indicators located here: Indicator LEDs flash according to input selection: Optical Input 3* AUX Input 2 AUX Input 1 *rapid flash indicates incompatible source. If there is no sound output, see Help & troubleshooting page.
Inhaltszusammenfassung zur Seite Nr. 11
INDICAtOr LEDS (CONtINUED) LED Indicators located here: When the four center Indicator LEDs are brightly lit, the selected SrS mode is enabled. When the LEDs are not lit, SrS mode is disabled.
Inhaltszusammenfassung zur Seite Nr. 12
WALL MOUNtING tHE SOUND BAr place the included wall mounting template against the wall under your tV. Mark the locations of the 4 bracket holes using a pencil. 1 32.24’’/ 819mm 32.24’’/ 819mm 32.24’’/ 819mm 80g White paper, 920x160mm, 2折后尺寸：230x160mm 80g White paper, 920x160mm, 2折后尺寸：230x160mm 请按照档案1：1印刷 80g White paper, 920x160mm, 2折后尺寸：230x160mm 请按照档案1：1印刷 请按照档案1：1印刷 2 Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete wall
Inhaltszusammenfassung zur Seite Nr. 13
HELp & trOUBLESHOOtING • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. There is no power. • Ensure the light on the power adapter is glowing green. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. • Increase the volume. Press Volume Up on the remote control. • Press MUTE on the remote to ensure the Sound Bar is not muted. • Press INPUT on the remote to select a diffe
Inhaltszusammenfassung zur Seite Nr. 14
ONE-y EAr LIMItED WArrANty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion. To
Inhaltszusammenfassung zur Seite Nr. 15
LEGAL & COMpLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio
Inhaltszusammenfassung zur Seite Nr. 16
NOtES
Inhaltszusammenfassung zur Seite Nr. 17
Inhaltszusammenfassung zur Seite Nr. 18
DO y OU HAVE QUEStIONS? LEt US HELp! y OUr prODUCt INCLUDES frEE LIfEtIME tECH SUppOrt the VIZIO support team is highly trained and is based in the United States. We can help with: • New product Setup • Connecting y our Devices • technical problems • And More phone: (877) 878-4946 (TOLL-FREE) Email: techsupport@VIZIO.com Web: www.VIZIO.com/support Hours of operation: Monday - friday: 5 am TO 9 pm (pST) Saturday - Sunday: 8 am TO 4 pm (pST) We speak English • Se habla Español • Nous p
Inhaltszusammenfassung zur Seite Nr. 19
MODÈLE VIZIO SB4020E-A0-NA GUIDE DE DÉMARRAGE RAPIDE
Inhaltszusammenfassung zur Seite Nr. 20
INfOrMAtIONS DE S écurIté IMpOrtANtES Votre barre de son est conçue et fabriquée pour fonctionner dans les limites de conception définies, et une mauvaise utilisation peut entraîner • Débranchez le cordon d’alimentation avant de nettoyer votre barre de son. Nettoyez à l’aide d’un chiffon sec seulement. N’utilisez pas de nettoyants un choc électrique ou un incendie. Pour éviter d’endommager votre barre de son, vous devez respecter les règles suivantes pour l’installation, liquides ou en aérosol
