Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
IMPORTANT SAFETY INSTRUCTIONS WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING: KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS THE APPARATUS SHALL NOT bE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO ObjECT FILLED WITHI LIqUID , SUCH AS vASES, SHALL bE PLACED ON THE APPARA- TUS. CLEAN ONLY WITH A DRY CLOTH. DO NOT bLOCK ANY OF THE vENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUC- TIONS. DO NOT INSTALL NEAR ANY HEAT SOURC- ES SUCH AS RADIAT
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS DecLaratIon of conforMIty ® manufacturer’s Name: Lexicon manufacturer’s Address: 8760 s. sandy parkway sandy, utah 84070, usA declares that the product: product name: pcm 96sur Note: product name may be suffixed by the eu. product option: None conforms to the following product specifications: safety: iec 60065 (7th ed. 2001) emc: eN 55013 (2001+A1) eN 55020 (1998) supplementary information: the product herewith complies with the requirement
Inhaltszusammenfassung zur Seite Nr. 4
Warranty This warranty is valid only for the original purchaser and only in the United ® States. If outside the United States please contact the local Lexicon distribu- tor. 1. The warranty registration card that accompanies this product must be mailed within 30 days after purchase date to validate this warranty. Proof- of-purchase is considered to be the burden of the consumer. 2. Lexicon Professional warrants this product, when bought and used solely within the U.S., to be free from defec
Inhaltszusammenfassung zur Seite Nr. 5
INtRodUctIoN ................................................................... 1 the FRoNt P ANeL .............................................................. 3 the ReAR P ANeL ................................................................ 5 USING the PcM 96 ............................................................ 7 Powering Up the PCM 96 ............................................. 7 The Preset Screen .......................................................... 7 Selecting Your Audi
Inhaltszusammenfassung zur Seite Nr. 6
How to Assign a Base Channel to the PCM96 Surround ....................................................................... 27 Channel Map (How Channels Map to Machines) ......... 28 Bank Dump .................................................................. 28 Reverse Bank Dump (Bank “Load”) .............................. 28 Continuous Controllers ................................................. 28 Soft Row Parameter/MIDI CC Map ............................. 29 Bank/Preset Map ..............
Inhaltszusammenfassung zur Seite Nr. 7
INtRodUctIoN Congratulations and thank you for purchasing the PCM96 Surround Reverb/Multi Effects Processor! Building on the success of the PCM96, the new PCM96 Surround offers more presets, more configuration options, and more inputs and outputs. The PCM96 Surround gives you industry standard reverbs and effects, with tremendous flexibility. Use the PCM96 Surround as a plug-in with your DAW, or keep it connected to your mixer. Either way, you have a multitude of configuration options to c
Inhaltszusammenfassung zur Seite Nr. 8
Inhaltszusammenfassung zur Seite Nr. 9
the FRoNt P ANeL 3 1 2 4 5 6 7 8 9 SELECT MACHINE TAP/TEMPO STORE FLASH BUSY LOAD COMPARE BACK 1 2 3 4 5 6 10 11 12 13 1. Gain LEDs Each row of Gain LEDs indicates input signal strength of each of the PCM96 Surround’s inputs. If the Audio Source is set to Analog (in the Audio Setup menu), they show analog levels. If Audio Source is set to Digital, they show digital levels. Range is from -18dB, -12dB, -6dB, -3dB, and 0dB. 2. MACHINE Button The PCM96 Surround can be configured as a single
Inhaltszusammenfassung zur Seite Nr. 10
Do not remove the Compact Flash card when this LED is lit. 9. Power Button Press to turn the PCM96 Surround on or off. 10. Display This high resolution, high contrast, and high viewing angle OLED (Organic LED) display shows menu and box configuration and status information. 11. BACK Pressing this button moves you up one level in the menu tree. Note that when a System preset is loaded, this button takes you to the System Mode Category Selection menu. When a Machine preset is loaded, the Back
Inhaltszusammenfassung zur Seite Nr. 11
the ReAR P ANL e - dIGIt AL ModeL 1 2 3 4 OUT 5-6 OUT 3-4 OUT 1-2 IN 5-6 IN 3-4 IN 1-2 5 6 1. POwER JACK Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic switching to correct voltage range. 2. ETHERNET INPUTS These RJ-45 connections are used to network PCM96 Surround devices and control them via Ethernet. 3. MIDI IN Receives MIDI information from other MIDI equipment such as master keyboard controllers, MIDI foot controllers, sequencers and synthesizers. MIDI THRU Passes any
Inhaltszusammenfassung zur Seite Nr. 12
6
Inhaltszusammenfassung zur Seite Nr. 13
the ReAR P ANeL - dIGIt AL ANd ANALoG ModeL 1 3 4 5 2 ANALOG I/O 7 6 1. POwER JACK Standard 3-pin IEC power connector. 100-240V, 50-60Hz automatic switching to correct voltage range. 2. DB25 6-CHANNEL DIGITAL AES I/O This D25 connector carries six analog inputs and outputs. 3. ETHERNET INPUTS These RJ-45 connections are used to network PCM96 Surround devices and control them via Ethernet. 4. MIDI IN Receives MIDI information from other MIDI equipment such as master keyboard controllers,
Inhaltszusammenfassung zur Seite Nr. 14
8
Inhaltszusammenfassung zur Seite Nr. 15
USING the PcM96 SURRoUNd PoWeRING UP the PM96 c SURRoUNd 1. Plug in the power cord. 2. Press the Power button. ® 3. The Lexicon logo appears, and remains until the boot process is com- plete. Next, the Preset screen appears, showing the currently loaded pre- set. the PRS e et ScReeN The Preset screen is the starting point for many of the instructions in this manual, so it’s a good idea to know how to get to the Preset screen. In most cases, pressing the Back button one or more times will t
Inhaltszusammenfassung zur Seite Nr. 16
SeLectING yoUR AUdIo SoURce ANd cLocK SoURce 1. Press the Machine button until the words “System View” appear in the Display. 48 96 1:Single Stereo Config 1:ConcertHall->Flange ((System View) System View) 2. Press the Select knob. The System Menu appears. System Menu Version 1.0 48 +Audio Setup +Machine Config +MIDI Control 3. With Audio Setup highlighted, press the Select knob. The Audio Setup menu appears. 48 |:Audio Setup Audio Source: ANALOG
Inhaltszusammenfassung zur Seite Nr. 17
System Presets and Machine Presets also have User and Card categories, where you can access user-edited presets. Presets in the User category are stored on the PCM96 Surround, and presets in the Card category are stored on a Compact Flash card. To select a different category 1. From the Preset screen, press the Back button. The Category Selection screen appears. Note that there are different Category Selection screens for System Presets and Machine Presets: Category Selection Screen - Sy
Inhaltszusammenfassung zur Seite Nr. 18
Note that pressing the Back button or the Select knob have different results depending on what kind of preset is loaded. The following diagram shows what happens when you press the Select knob, Back button, and Machine button in both System View and Machine View. Preset Category Preset Category Selection View Selection View (System) (Machine) Press Press Press Press Select Back Select Back Press Machine Press Machine Button Button Preset Screen Preset Screen (Machines 1-4) (System) Press Pre
Inhaltszusammenfassung zur Seite Nr. 19
48 0:Med Hall 0:Med Hall 1:PreDelay 1:PreDelay :14ms :14ms 2:MidRT 2:ReverbTime :1.59s :1.59s 3:RvbOutFreq 3:RvbOutFreq :4750.0Hz :4750.0Hz Configuration Icon (Machine Preset) Press the Machine button repeatedly to cycle through the virtual machines in a System Preset, and eventually back to the System Preset. edItING A PReSet To edit a System Preset, you must edit the virtual machines within it. Press the Machine button to cycle through the virtual machines within a System Preset. Each vir
Inhaltszusammenfassung zur Seite Nr. 20
StoRING A PReSet Once you’ve edited a preset, you can store it on the PCM96 Surround (in the User category) or on a Compact Flash card (in the Card category). Note: When you first insert a Compact Flash card, you may receive the message “Card Needs Initializing.” Refer to page 13 for instructions on how to initialize a Compact Flash card. 1. From the Preset screen, press the Store button. The Save As screen appears. Select Knob -> Change Position ʻAʼ Knob -> Change Letter Save As
