Inhaltszusammenfassung zur Seite Nr. 1
FNSW-1600S
FNSW-2400S
Fast Ethernet Smart Switch
10/100Base-TX
NOVASwitch
Inhaltszusammenfassung zur Seite Nr. 2
© PLANET is a registered trademark of PLANET This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this equipm
Inhaltszusammenfassung zur Seite Nr. 3
1. ................................ ........... 5 2. ................................ ............. 7 2.1 K F ................................ ................................ .... 7 2.2 F RONT P ................................ ................................ ...... 8 2.2.1 Ports Speed ................................ ................................ .. 8 2.2.2 Cabling ................................ ................................ ...... 8 2.2.3 ................................ ............
Inhaltszusammenfassung zur Seite Nr. 4
5.2 H - F ................................ .................. 23 5.3 F E THERNET ................................ ................................ 24 5.4 A UTO EGOTIATION ................................ .......................... 25 5.5 T ................................ ...................... 25 5.6 S A ................................ ........................ 26 6. TROUBLESHOOTING ................................ ...................... 27 7. ................................ .......... 29 8. .
Inhaltszusammenfassung zur Seite Nr. 5
Thank you for purchasing a PLANET NOVASwitch series Ethernet Switches. Before continuing, please check the contents of the product package. This product package should contain the following items: • One • • • ’ • is found to be defective, damaged or missing. Retain the original packaging (carton), including the packing materials, is a need to return it to us for repair. . 5 FNSW-16/2400S User's Guide and use them to re-pack the product in the unlikely event there Please inform your local de
Inhaltszusammenfassung zur Seite Nr. 6
This page intentionally left blank! NOVASwitch series PLANET
Inhaltszusammenfassung zur Seite Nr. 7
2.1 Key Features • • • eliminates bad data packets with minimal delay • Auto-Negotiation function • port16/24. DIP switch for Half/Full-Duplex selection • • • • • Either VLAN or • • • 7 ’ Guide s FNSW-16/2400S User One Redundant link support Up to four trunk support for up to 800Mbps bandwidth Up to four port-based VLAN support Turnk port support managed via console Console port for switch basic management use Internal, full-range power supply suitable for worldwide Flow control to
Inhaltszusammenfassung zur Seite Nr. 8
2.2 Front Panel FNSW-1600S 2.2.1 Ports Speed n They automatically support 100Base-TX and 10Base-T 200Mbps after the negotiation with the connected device. n The port 16/24 can be a 100Base-FX fiber-optic port as the extension module installed (rear) At the mean time, the RJ- selectable by the DIP-switch on the module. Please refer to the installation guide of the extension module for more. 2.2.2 phone jacks -- for connection of unshielded twisted-pair cable (UTP). The IEEE 802.3u Fast Ethernet
Inhaltszusammenfassung zur Seite Nr. 9
Cat 3, 4, 5 Cat.5 UTP only ST / SC 62.5/125 μ m multi-mode fiber 23 24 2.2.3 19 20 Each numbered port of the Switch are MDI-X port, you can direct use straight cable for the connection to your end nodes. also refer to Section “ ” for more. 2.2.4 “ ” LED indicator to indicate the rear open slot is L S / M D C U Lit to indicate Full-Duplex mode Blinks if a collision mode. M IDDLE Link Green Activity Blink to indicate the port is Green 9 ’ Guide s FNSW-16/2400S User receiving data packets Blink R
Inhaltszusammenfassung zur Seite Nr. 10
L Green that port runs in 100Mbps Remains off and Link ON to OFF indicate the port runs in 10Mbps 2.3 The Rear Panel 2.3.1 NOTE: 2.3.2 Power Connector included in the product package. Attach the female end of the 2.3.3 Fan function is not impaired. NOVASwitch series PLANET 10 overheated. Please keep the fan area clear so that the cooling All computing and communications devices work best when not 100VAC to 240VAC, 50/60Hz. grounded power outlet. The accepted power range is from cord to the po
Inhaltszusammenfassung zur Seite Nr. 11
2.3.4 The RS-232 console helps to manage the Switch. Please use the cable with the package. Attach one end to the switch and the other to your PC ’ s COM1 or COM2. Then startup your console program like Windows Hyper Terminal, or with parameter: 19200, n, 8, 1. Please refer to Chapter 4, Console management for more. ’ Guide s FNSW-16/2400S User 11 ProCOMM RS-232 Console
Inhaltszusammenfassung zur Seite Nr. 12
This page intentionally left blank! NOVASwitch series PLANET 12
Inhaltszusammenfassung zur Seite Nr. 13
The Switch do NOT require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. However, the port will helps to have more setting to your Switch. To get the best use of the Switch, many things need to be for details . 3.1 Rack-Mount Installation Most users prefer to attach the power cord to the hub before installation in a network rack. Do not plug the other end of the cord into a power outlet until after
Inhaltszusammenfassung zur Seite Nr. 14
3.3 Power notes: The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time, please consider use an UPS (Uninterrupted Power 2. In some area, installing a surge suppression device may also help to protect your hub from being damaged by unregulated surge or current to the Switch or the power NOVASwitch series PLANET 14 adapter. loss or network downtime. Supply) for your device. It will prevent you from network data 1.
Inhaltszusammenfassung zur Seite Nr. 15
The attached cable in the packing box is used to connect to PC ’ s RS232C port (COM1, or COM2). Following the instructions below to configure the switch. 4.1 CONNECT TO PC RS-232 serial cable Attach the RS-232 cable 9-pin female connector to the male connector on the demo board. Plug the other side of this cable to your PC. In Window 95/98, launch “ ” , create a new connection and adjust setting as below: Data byte: 8 bits Parity check: Stop bit: 1 Flow Control: Console Menu Launch the new ter
Inhaltszusammenfassung zur Seite Nr. 16
(1) (2) Port Status (3) Port Setting (4) Factory Setting (5) (6) sub-menu, simply follow the instruction and type the number on the command line, and press ENTER. 4.2 Trunk/ VLAN Setting “ 1 ” (1) Trunking (2) VLAN Setting (3) Exit >> : the Switch support either TRUNKING or VLAN. As mean time. Default: No . 4.2.1 “ 1 ” from Sub Menu, press “ ” 4-port Trunk on Port 1/2/3/4 2-Port Trunk on Port 1/2 SWITCH in 1-VLAN mode Trunk (1) Disable (2)2-Port (3)4-Port (4)Cancel Setting>> Assign Trunk
Inhaltszusammenfassung zur Seite Nr. 17
Default: No Trunk Group in the device. As soon as trunk port enabled, the ports will be grouped as followings: st 1 group: 1 , 3, 5, 7, 9, 11, 13, 15, 17, 21, nd 2 group: 2 , 4, 6, 8, 10, 12, 14, 16, 18, 19, 20, 22, st 1 : 1 , 5, 9, 13, 17, nd 2 : 2 , 6, 10, 14, 18, 3 : 3 , 7, 11, 15, 19, th 4 : 4 , 8, 12, 16, 20, party ’ s standard switch with two links or four links without fears of network looping. The trunks will two or four times the bandwidth make the connection successfully or
Inhaltszusammenfassung zur Seite Nr. 18
Default: No VLAN Group in the device (all ports in VLAN1) Use Toggle to select VLAN group and “ ” to make the Follow the selection to add port 1 to VLAN2. Enter Port# >> 1 Toggle Group(1~4) to add/remove (5)Update VLAN setting >>2 Toggle Group(1~4) to add/remove (5)Update VLAN setting >>5 restult is as below: PORT 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 VLAN1 X X X X X X X X X X X X X X X X X X X X X X X X VLAN2 x VLAN3 VLAN4 (1)Se
Inhaltszusammenfassung zur Seite Nr. 19
VLAN3 X X VLAN4 X X 4.3 Port Status S “ 2 ” from < Console PORT 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 AutoN X X X X X X X X X X X X X X X X X X X X X X X X BackP X X X X X X X X X X X X X X X X X X X X X X X Pause X X X X X X X X X X X X X X X X X X X X X X X SWITCH in 1-VLAN mode Any key to quit!! Display the Port Status group “ Auto- ” “ ” flow contr
Inhaltszusammenfassung zur Seite Nr. 20
Enable port 2 ’ s PAUSE frame support Enetr Port Number ((qq) to quit)>> 2 Select (1)Port Mode (2)Pause (3)Back Pressure>>2 Select Pause in FDX (1)Enable (2)Disable>>1 PAUSE frame is used while the devices that connect to the Switch handle the incoming packets, the Switch send out the PAUSE frame to warn the device hold the transmission. Be noted, the connected the capability will not helps in avoid packet loss. Default : Enabled per port Port Setting chart example 3 Enable port 3 ’ s Enetr Por
