Bedienungsanleitung AT&T DEFINITY 8101

Inhaltszusammenfassung zur Seite Nr. 1

Version Note: If you are using System 75,
Version 1, you can use up to 16 digits; for
Version 2, you can use up to 24 digits.
AT&T
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
®
7
Press [ # ]
DEFINITY Communications System
Generic 1 and Generic 3 and System 75
● Number is stored
and Generic 2 and System 85
●
Repeat Steps 5 through 7 if you want to
8101, 8102, and 8110 Telephones
program additional items on the same list;
Quick Reference Guide
h

Inhaltszusammenfassung zur Seite Nr. 2

To retrieve parked call from any extension Note: You can place only one Automatic Callback call at a time, and Automatic Callback is canceled 1 Dial Answer Back code [dial tone] after 30 minutes or if the callback call is 2 Dial the extension where call is parked unanswered. [confirmation tone] To cancel an Automatic Callback request ● If you are returning to a call parked at your 1 Dial Automatic Callback Cancel code telephone, dial your own extension [confirmation tone] ● You are connected to

Inhaltszusammenfassung zur Seite Nr. 3

do not need to answer or place another call), press To answer a call waiting tone, putting your present [ HOLD ] on your telephone. When you want to return call on hold to the held call, press [ HOLD ] again. See “Hold” in the 1 Press [ FLASH ] [recall dial tone] section titled Phone Features. 2 Dial Hold code Version Note: If you are using System 75, Version 1, ● You are connected to waiting call use the following directions: To return to held call To put a call on hold 1 Complete present call

Inhaltszusammenfassung zur Seite Nr. 4

3 Dial call 2 (or another feature) PRIORITY CALLING [ ] Note: If you hang up, call 1 sends a 3-burst priority To place a priority call ring. 1 Dial Priority Calling code [dial tone] To put call 2 on hold and return to call 1 2 Dial extension 1 Press [ FLASH ] [recall dial tone] 2 Dial Hold code SEND ALL CALLS [ ] ● Call 2 is put on hold, and call 1 is reconnected To send all incoming calls (except priority calls) Note: If you hang up, call 2 sends a 3-burst priority immediately to coverage ring.