Inhaltszusammenfassung zur Seite Nr. 1
™
RazorVision Video Enhancement Cable
User Manual
This User Manual is for the
following RazorVision models:
AV62300-08, AV62300-16
AV62400-08, AV62400-16
AV61400-08, AV61400-16
Inhaltszusammenfassung zur Seite Nr. 2
™ RazorVision Video Enhancement Cable Table of Contents Page Introduction ...........................................................................2 Package Contents ............................................................. 3 Care and Maintenance ...................................................... 4 RazorVision Features ................................................... 5-6 Directions for Setup and Use ......................................7-8 Important Notes on Operation ...........
Inhaltszusammenfassung zur Seite Nr. 3
™ RazorVision Video Enhancement Cable Introduction Congratulations and thank you for buying the PureAV RazorVision Video Enhancement Cable. This easy-to-use product has been designed with your convenience in mind. It will allow you to quickly make adjustments that will bring your TV or projector’s video capabilities to life. RazorVision optimizes both standard and high-definition video resolutions and supports computer-video resolutions as well. The PureAV RazorVision Cable processes the v
Inhaltszusammenfassung zur Seite Nr. 4
™ RazorVision Video Enhancement Cable Package Contents All RazorVision models come with these standard items: • RazorVision Unit • Power Adapter with 6 ft. cord • 2 Mounting Screws • User Manual • 2 Cables* *The Cable you get depends on the RazorVision model you purchased: If you own this model: You should have these cables... ™ AV61400-XX 2 HDMI Interface-to-DVI Video Cables ™ AV62300-XX 2 HDMI Interface Video Cables ™ AV62400-XX 1 HDMI Interface-to-DVI Video Cable ™ and 1 HDMI Interface
Inhaltszusammenfassung zur Seite Nr. 5
™ RazorVision Video Enhancement Cable Care and Maintenance • Allo w for ventilation; do not place the unit where it will be exposed to temperatures below 32 degrees Fahrenheit (0 degrees C) or above 104 degrees Fahrenheit (40 degrees C). • Do not let the unit get wet. • Cle an with soft, dry cloth only. • Do not use cleaning agents, as they may damage the finish. • Us e only the supplied power adapter; use of other power adapters may void warranty. • F or optimal performance, us
Inhaltszusammenfassung zur Seite Nr. 6
™ RazorVision Video Enhancement Cable RazorVision Features 1. Status Indicator Button a. Allows you to step through these 3 settings, each time you press the button: i. Split (display screen)—left side shows no enhancement, right side shows RazorVision enhancement ii. On—whole picture is RazorVision enhanced iii. Off—RazorVision enhancement off 2. Level Indicator Button a. Allows you to step through 3 levels of RazorVision enhancement—low, medium, and high—each time you press t
Inhaltszusammenfassung zur Seite Nr. 7
™ RazorVision Video Enhancement Cable RazorVision Features (continued) PureAV HDMI and DVI Cable Features 5 2 1 3 4 1. 2 4k Gold-Plated Connectors 4. 99.99% Oxygen-Free, create precise contact for Solid-Copper Conductors low loss and High-Purity, Silver Solder Joints drastically 2. Precision-Formulated, reduce signal distortion for Polyethylene Dielectric unrivaled video clarity Material maintains stronger signals that yield superior 5. Five-Layer Shielding video accuracy isolates fr
Inhaltszusammenfassung zur Seite Nr. 8
™ RazorVision Video Enhancement Cable � � � ��� � � � � � � � � � � � ��� � � � � � � � � � ��� ��� � � � � � � � � � � � � ��� � � � � � � � � ��� � � � � � � � � � � ��� � � � � � � � � Directions for Setup and �U ��� ���s � � � � �e � � � � � � � ��� � � � � � � � ��� � � � � � � � � � � � ��� � � � � � � � � Here are the illustrations for connecting RazorVision by model number: � ��� ��� � � � � � � � � � � � � ��� � � � � � AV61400-08 and AV61400-16 � � ��� � � � � � � � � � � ��� � � �
Inhaltszusammenfassung zur Seite Nr. 9
™ RazorVision Video Enhancement Cable Directions for Setup and Use 3. Turn on your TV and your source device. 4. Plug in the RazorVision AC adapter to a wall outlet or power console. Insert the DC plug into the DC receptacle on the side of the RazorVision. 5. The lights on both sides of the RazorVision will flash for a few seconds to indicate it is connecting with the video equipment. When the lights on both sides stop blinking and remain continuously on, the RazorVision is ready. 6. Some
Inhaltszusammenfassung zur Seite Nr. 10
™ RazorVision Video Enhancement Cable Important Notes on Operation • F or the best effect, use RazorVision processing with HDTV, or with source material (such as a DVD) that has been up-converted to either 720p or 1080i. Your TV display should indicate the resolution you are watching when the source connection is first made. You can also check this in your TV’s video display settings. Consult your TV manufacturer’s user manual on how to do this. • W hen connected to some TVs, the RazorVis
Inhaltszusammenfassung zur Seite Nr. 11
™ RazorVision Video Enhancement Cable Troubleshooting Guide Symptom Solution Status light is continuously This indicates that no display has on but the Level light blinks been detected. continuously for more than 1. Check the connection between the 15 seconds. RazorVision unit and the TV. 2. Make sure your TV is powered on. Level light is continuously This indicates that no source on but the Status light blinks input was detected. continuously for about 15 1. Check the connection betwee
Inhaltszusammenfassung zur Seite Nr. 12
™ RazorVision Video Enhancement Cable Troubleshooting Guide (continued) Symptom Solution I get a picture but no sound. 1. If you are using DVI connections on either your TV or your source device, then you must use separate audio cables. 2. If you are using HDMI connections on both your TV and source device, check the menu settings on your source and/or display to adjust audio for HDMI. TV and source device are 1. Check power connection both on but RazorVision to RazorVision. is o
Inhaltszusammenfassung zur Seite Nr. 13
™ RazorVision Video Enhancement Cable Instructions for Mounting Troubleshooting Guide (continued) RazorVision Unit If you wish to mount the RazorVision to the inside of your cabinet or to your wall, please follow these steps: 1. Cut out the template on the following page along the perforated lines. 2. Place the page where you want to install the RazorVision. 3. Us e a hammer and a small nail to make a starter hole for the screws. 4. Remove the template page from your cabinet or wall.
Inhaltszusammenfassung zur Seite Nr. 14
Cut along the perforated lines. ™ RazorVision Video Enhancement Cable 13
Inhaltszusammenfassung zur Seite Nr. 15
™ RazorVision Video Enhancement Cable FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, RV60000, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference re
Inhaltszusammenfassung zur Seite Nr. 16
™ RazorVision Video Enhancement Cable Belkin Corporation Limited Lifetime Product Warranty (continued) BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or conse
Inhaltszusammenfassung zur Seite Nr. 17
Inhaltszusammenfassung zur Seite Nr. 18
www.pureav.com Belkin Tech Support Belkin Ltd. US: 800-223-5546 ext. 2263 7 Bowen Crescent, West Gosford 310-898-1100 ext. 2263 NSW 2250, Australia +61 (0) 2 4372 8600 Belkin Corporation +61 (0) 2 4372 8603 fax 501 West Walnut Street Compton, CA 90220-5221, USA Belkin B.V. 310-898-1100 Boeing Avenue 333 310-898-1111 fax 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 Belkin Ltd. +31 (0) 20 654 7349 fax Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933
