Inhaltszusammenfassung zur Seite Nr. 1
User's Manual
Video Distributor
LED-VD1
Inhaltszusammenfassung zur Seite Nr. 2
Index Declaration of conformity .......................................................................................................................... English-1 Important Information ................................................................................................................................ English-2 Safety Precautions, Maintenance & Recommended Use ....................................................................... English-3 Contents .................................
Inhaltszusammenfassung zur Seite Nr. 3
Declaration of conformity For USA FCC Information 1. Use the attached specified cables with the LED-VD1 (D000LD) video distributor so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use a good quality shielded video signal cable. Use of other cables and adapters may cause interference with radio and television reception. 2. This equipment has been tested and found to comply with the limits for
Inhaltszusammenfassung zur Seite Nr. 4
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE
Inhaltszusammenfassung zur Seite Nr. 5
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING Immediately unplug your video distributor from the wall outlet and refer WHEN SETTING UP AND USING servicing to qualified service personnel under the following conditions: THE VIDEO DISTRIBUTOR: • If the video distributor has an unusual odor. • DO NOT OPEN THE VIDEO DISTRIBUTOR. There are no user • When the power supply cord or plug is damaged. serviceable parts inside and opening or removing c
Inhaltszusammenfassung zur Seite Nr. 6
Contents The parts supplied with this unit are as follows. In the rare case that one of these parts is missing or damaged, contact the retailer. • Power cord (1.8 m US) • Power cord (1.8 m EU) • Signal cable (DVI-D, 1.8 m) • USB/RS-485 adapter • LAN cable (3 m) • Utility disk • Setup manual A signal cable to connect the Video Distributor and LED Module is not included. Compatible Signal Cable Specifications - DVI-D dual link (max 30 meters: Signal quality may degrade depending on the quality of
Inhaltszusammenfassung zur Seite Nr. 7
Parts Name and Functions Front Panel POWER LED DISPLAY OUTPUT DVI 1 2 3 4 5 6 7 8 OUT IN RS- 4 8 5 LED-VD1 VIDEO DISTRIBUTOR POWER LED DISPLAY OUTPUT DVI 1 2 3 4 5 6 7 8 OUT IN RS-485 1 2 3 4 5 1 Power lamp 4 DVI Input lamp Lights up (red) when the power is ON. Lights up (orange) with an image signal is input to the DVI input terminal. LED Display lamp RS-485 lamp 2 5 The port connected to the LED module lights up (green). Lights up (orange) when a command is sent or received. DVI Output lam
Inhaltszusammenfassung zur Seite Nr. 8
Connections Connecting an External Device • To protect the device, switch off the power before connecting it. • When connecting devices, follow the instructions in their user manuals. Connecting the Power NOTE : • Connect the power cord to the unit before connecting it to the power outlet. 1. Insert one end of the power cord into the unit’s power input connector. Insert the cord fully and securely. 2. Connect the power plug to a commercial power source outlet. WARNING • Do not use with a power
Inhaltszusammenfassung zur Seite Nr. 9
Connection Methods Before Connecting • Before connecting to the device, turn off the power to the device you are connecting to and all peripheral devices. • Refer to the user's manuals for those devices. Video processor [LED-VP1] LED module Computer (USB/RS485 adapter) LED module [LED-06AF1/LED-15BF1] English-7
Inhaltszusammenfassung zur Seite Nr. 10
Installing Drivers 1. Compatible Operating Systems Windows 2000 Professional Windows XP Professional Windows 2003 Server Windows Vista Windows 7 2. How to Install Connect the USB/RS-485 adapter to your PC after the drivers have successfully been installed. Insert the included CD-ROM into your computer's optical media drive. Run “RS485_SETUP.exe” in the “\Software\Driver” folder on the CD-ROM to begin the installation. (1) Click [Next]. (2) View the terms of the license agreement, and if you
Inhaltszusammenfassung zur Seite Nr. 11
(6) Click [Install]. (7) The Success window will be displayed. [OK] Click to complete the driver installation. English-9
Inhaltszusammenfassung zur Seite Nr. 12
Troubleshooting Check the following items. Problems/Symptoms Cause and Solution Cannot perform LED module mapping The LED module connector cable for this product must be connected using a DVI dual-link cable. Cannot perform command communication • The USB/RS-485 adapter will be detected as a COM port by the PC. Check the COM port number of the connected adapter. • The 4th and 5th pins of the RJ-45 cable are used for communication. Check to ensure that the 4th and 5th pins of your LAN cable are
Inhaltszusammenfassung zur Seite Nr. 13
Appendix Specifications Product Name LED-VD1 Notes Interface DVI-D Image Input Compatible 1024x768 @60Hz Resolutions (*1) DVI-D For cascade connection of LED-VD1 Image Output Interface Connect to the LED module using a dual-link (*2) DVI-D (8 outputs) cable (*3) Interface RJ-45 (input/output 1 system) Control Specifications RS-485 Power Supply 100 to 240 VAC, 50/60 Hz Power Consumption 15 W Complied Regulatory and Guidelines cTUVus, TUV-GS, FCC(Class-A), CE(Class-A) Dimension 480 (W) x 98 (H)
Inhaltszusammenfassung zur Seite Nr. 14
Dimensional Drawing 407 479.2 325.1 Unit: mm English-12 290.5 280 90 98.2 10.3 86.1
Inhaltszusammenfassung zur Seite Nr. 15
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentallyfriendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union). Disposi
