Inhaltszusammenfassung zur Seite Nr. 1
CD RECEIVER KD-SH77/KD-SH55
RECEPTOR CON CD KD-SH77/KD-SH55
RECEPTEUR CD KD-SH77/KD-SH55
KD-SH77
ATT
ANGLE
EQ
CD
DAB
DISC
FM
PRESET PRESET
AM R D
KD-SH55
CH
DISC
AUX SEL
VOLUME
RM-RK100
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabine
Inhaltszusammenfassung zur Seite Nr. 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ............... 17 Setting the clock ...................................... 17 LOCATION OF THE BUTTONS ............ 4 Changing the general settings (PSM) ...... 17 Control panel .........................................
Inhaltszusammenfassung zur Seite Nr. 4
LOCATION OF THE BUTTONS Control panel 1 2 3 4 5 6 7 8 9 p q y t r e w 1 (eject) button q MP3 INPUT jack 2 Control dial w (control panel release) button 3 SEL (select) button e Remote sensor 4 EQ (equalization) button r Number buttons 5 S.BASS (S) (super bass) button • MO (monaural) button 6 DISP (D) (display) button • LO (local) button 7 BAND (B) button • INT (intro scan) button 8 MODE (M) button • RPT (repeat) button 9¢ / 4 buttons • RND (random) button • Also functions as SSM buttons when pr
Inhaltszusammenfassung zur Seite Nr. 5
3 Changes the angle of the control panel in three Remote controller positions. 4 Selects the sound modes. Each time you press the button, sound modes change. ATT 1 3 ANGLE 5 • Searches for stations while listening to the EQ 4 radio. • Fast-forwards or reverses the track if pressed CD 5 and held while listening to a CD. DAB • Skips to the beginning of the next track or goes DISC 6 FM back to the beginning of the current (or previous tracks) if pressed briefly while PRESET PRESET 2 listening to a
Inhaltszusammenfassung zur Seite Nr. 6
2. Place the battery. Preparing the remote controller Slide the battery into the holder with the + side facing upwards so that the battery is fixed in Before using the remote controller: the holder. • Aim the remote controller directly at the remote Lithium coin battery sensor on the main unit. Make sure there is no (product number: obstacle in between. CR2025) 3. Return the battery holder. Insert again the battery holder pushing it until you hear a clicking sound. Remote sensor (back side) • Do
Inhaltszusammenfassung zur Seite Nr. 7
BASIC OPERATIONS Note: When you use this unit for the first time, set the built-in clock correctly, see page 17. 2 1 1 Turn on the power and select the 2 Adjust the volume. source. To increase the volume. When you press the button for the first time, the power comes on. Then each time To decrease the volume. you press the button, the source changes as follows. For KD-SH77 Volume level appears. * ** FM TUNER CD PLAY CD CHANGER or AM TUNER AUX INPUT LINE INPUT Volume level indicator For KD-SH55 *
Inhaltszusammenfassung zur Seite Nr. 8
RADIO BASIC OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune into a particular station. To turn in FM stations only with strong signals 1 Press MODE (M) to enter the functions mode Searching a station automatically: while listening to an FM broadcast. Auto search 2 Press LO (local) while still in the functions mode, so that the LOCAL indicator
Inhaltszusammenfassung zur Seite Nr. 9
2 Press and hold ¢ or 4 until Storing stations in memory “M” (manual) starts flashing on the display. You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 3 Tune into a station you want while “M” 1 Select the FM band (FM1 – 3) you want is f
Inhaltszusammenfassung zur Seite Nr. 10
Manual preset Tuning into a preset station You can preset up to 6 stations in each band You can easily tune into a preset station. (FM1, FM2, FM3 and AM) manually. Remember that you must store stations first. If Ex.: Storing an FM station of 88.3 MHz into the you have not stored them yet, see “Storing preset number 1 of the FM1 band stations in memory” on page 9. 1 Select the band (FM1 – 3, AM) you 1 Select the band (FM1 – 3, AM). want to store stations into (in this 1 Press SOURCE example, FM1
Inhaltszusammenfassung zur Seite Nr. 11
CD OPERATIONS Notes: Playing a CD • When a CD is in the loading slot, selecting “CD” as the source by pressing SOURCE starts CD play. 1 Open the loading slot. • When a CD is inserted upside down, the CD The control panel moves down, automatically ejects. and the loading slot appears. • When you play a CD Text, the disc title and performer appear on the display. Then the current track title Note: appears on the display, followed by the track number and elapsed playing time. See also “Playing a C
Inhaltszusammenfassung zur Seite Nr. 12
To go to the next track or the previous tracks Playing a CD Text Press ¢ briefly, while In a CD Text, some information about the disc (its playing a CD, to go ahead disc title, performer and track title) is recorded. to the beginning of the next You can show these disc information on the track. Each time you press display. the button consecutively, the beginning of the next track 1 Select text display mode while is located and played back. playing a CD Text. Press 4 briefly, while Each time yo
Inhaltszusammenfassung zur Seite Nr. 13
To play back only intros (Intro scan) Selecting CD playback modes 1 Press MODE (M) to enter the functions mode while playing a To play back tracks at random (Random Play) CD. This unit enters the 1 Press MODE (M) to enter the functions mode. functions mode while playing a 2 Press INT (intro scan) while still CD. This unit enters the functions in the functions mode, so that mode. the “INTRO” appears on the 2 Press RND (random) while still 4 display. in the functions mode, so that Then, each time
Inhaltszusammenfassung zur Seite Nr. 14
SOUND ADJUSTMENTS Reinforcing the bass sound Adjusting the sound The richness and fullness of the bass sound is You can adjust the sound characteristics to your clearly maintained regardless of how low you set preference. the volume – Super Bass. 1 Select the item you want to adjust. • You can also adjust the level of Super Bass. Each time you press the button, the adjustable items change as 1 Press S.BASS. follows: “S.BASS” appears on the display. FAD BAL EXT VOL** (Fader) (Balance) (External v
Inhaltszusammenfassung zur Seite Nr. 15
Notes: Selecting preset sound modes • You can adjust each sound mode to your preference, and store it in memory. You can select a preset sound mode suitable to If you want to adjust and store your original sound the music genre. mode, see “Storing your own sound adjustments” on page 16. • To adjust the bass reinforcement level temporarily, 1 Press EQ. see page 14. The last selected sound mode is recalled, and it is applied to the current source. To store a sound mode separately for The EQ indica
Inhaltszusammenfassung zur Seite Nr. 16
Storing your own sound 4 Repeat steps 2 and 3 to adjust the other sound elements. adjustments You can adjust the sound modes to your preference 5 Select one of the user sound modes and store your own adjustments in memory (USER 1, USER 2, USER 3). (USER 1, USER 2 and USER 3). • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again. 1 Press EQ. The last selected sound mode is recalled, and it is applied to the current source.
Inhaltszusammenfassung zur Seite Nr. 17
OTHER MAIN FUNCTIONS Changing the general settings Setting the clock (PSM) 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM You can change the items listed on the next page items appears on the display. by using the PSM (Preferred Setting Mode) control. (See page 18.) Basic Procedure 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM 2 Set the hour. items appears on the display. 1 Select “CLOCK HOUR” if not shown on (See page 18.) the display
Inhaltszusammenfassung zur Seite Nr. 18
Preferred Setting Mode (PSM) items 1 2 3 Factory-preset See Set. settings page Counter- clockwise Clockwise Hold. Select. Back Advance CLOCK HOUR Hour adjustment 1:00 17 CLOCK MIN Minute adjustment Back Advance EQ LINK Sound control memory LINK OFF LINK OFF LINK ON 15 linkage CLOCK DISP Clock display CLOCK OFF CLOCK ON CLOCK ON 19 EQ ONLY LEVEL+EQ LEVEL/EQ Equalizer/Level indicator LEVEL+EQ 19 LEVEL ONLY AUTO OFF DIMMER Dimmer mode AUTO 19 ON BEEP SW Key-touch tone BEEP OFF BEEP ON BEEP ON 19 P.
Inhaltszusammenfassung zur Seite Nr. 19
To set the clock display – CLOCK DISP To turn on/off the power amplifier switch – P. AMP SW. (For KD-SH77 only) You can set the clock to be shown on the display when the unit is turned on. You can switch off the built-in amplifier and send When shipped from the factory, the clock is set to the audio signals only to the external amplifier(s) be shown on the display. to get clear sounds and to prevent internal heat • CLOCK ON: Clock display is turned on. buildup inside this unit. • CLOCK OFF: Cloc
Inhaltszusammenfassung zur Seite Nr. 20
To change the AM/FM channel intervals To adjust the auxiliary input level – AREA – AUX ADJ Adjust the auxiliary input level properly when an When this unit is shipped from the factory, the external component is connected to the MP3 channel intervals are set to 10 kHz for AM and 200 INPUT jack. kHz for FM (AREA US settings). When shipped from the factory, the auxiliary input You will have to change the channel intervals level is set at level 00. when using this unit in an area other than North If
