Inhaltszusammenfassung zur Seite Nr. 1
INTRODUCTION
Wireless Pro Weather Station
Thank you for selecting the Oregon Scientific™ Wireless
with USB upload
Pro Weather Station with USB upload (WMR88 /
Model: WMR88 / WMR88A
WMR88A).
The base station is compatible with other sensors. To
USER MANUAL
purchase additional sensors, please contact your local
retailer.
CONTENTS
Sensors with this logo are compatible with this
Introduction ............................................................... 1
unit.
Packaging contents .........
Inhaltszusammenfassung zur Seite Nr. 2
1. Wall mount holes RAIN GAUGE 2. Battery compartment 3. SEARCH: Searches for sensors or for the radio- controlled clock signal 4. RESET: Returns unit to default settings 2 x AA UM-3 5. EU / UK switch: Select the nearest radio signal 1.5V batteries (WMR88 only) 6. USB socket 4 x screws 7. AC adapter socket (Type B) 1 x rain collector 6 x washers LCD DISPLAY 1 2 ACCESSORIES - SENSORS 3 B This product can work with up to 3 sensors at any one 4 time to capture outdoor temperature, relative humi
Inhaltszusammenfassung zur Seite Nr. 3
2. Outdoor wind sensor battery is low RAIN GAUGE 3. Wind speed level indicator Base and funnel: 4. Wind speed level description 5. Minimum wind chill is displayed 6. Wind direction display 2 C UVI / Barometer / Rainfall Area 1 3 1 2 1 3 4 1. Rain gauge 5 6 7 2. Battery compartment 1. UVI / barometer / rainfall reading is displayed 3. RESET button 2. Past 24hrs rainfall is displayed 3. Outdoor UV / rain sensor battery is low 4. UVI / barometric pressure (mmHg, inHg or mb) / rainfall reading
Inhaltszusammenfassung zur Seite Nr. 4
To insert batteries: SET UP BASE STATION NOTE Install batteries in the remote sensors before the base station matching the polarities (+ and -). 2 1 1. Unscrew the anemometer from the wind sensor For continuous use, please install the AC adaptor. The carefully. batteries are for back-up use only. 2. Insert batteries matching the polarities (+ / -) and NOTE Make sure the adaptor is not obstructed and is replace the anemometer. Press RESET after each easily accessible to the unit. batt
Inhaltszusammenfassung zur Seite Nr. 5
a. Align the back of the sensor connector to an existing WIND SENSOR pole. Secure in place by inserting the ends of the U-bolt into the holes on the sensor connector and securing it with washers and bolts. OR b. Insert 4 type A screws into the holes of the sensor connector. Screw firmly into place, i.e., fence. Slide wind vane onto the smaller end of the sensor connector. Press SELECT until the selected area icon is in the top right display area. • Wind speed: Gently rotate the wind vane
Inhaltszusammenfassung zur Seite Nr. 6
To ensure a level plane: 2. Press and hold SEARCH. Put a few drops of water on the cross at the base of the appears when it is enabled. funnel to check the horizontal level. NOTE For best reception, the base station should be placed on a flat, non-metallic surface near a window in an upper floor of your home. The antenna should be placed 1 away from electrical appliances and not be moved around when searching for a signal. 3 2 CLOCK / CALENDAR 4 To set the clock manually, disable the cloc
Inhaltszusammenfassung zur Seite Nr. 7
To view temperature (Current / Max / Min temperature) AUTO SCANNING FUNCTION readings: To activate the outdoor temperature and humidity 1. Press SELECT to navigate to the Temperature Area. auto-scan function: will show next to the Area. 1. Press SELECT to navigate to the Temperature or 2. Press UP / DOWN to select the channel. Humidity Area. will show next to the Area. 3. Press MAX / MIN to toggle between current / MAX / 2. Press and hold MODE to activate auto-scan. The MIN displays.
Inhaltszusammenfassung zur Seite Nr. 8
To view the UV / Barometer / Rainfall readings: The wind level is shown by a series of icons: 1. Press SELECT to navigate to the UV / Barometer / ICON LEVEL DESCRIPTION Rainfall Area. will show next to the Area. N/A <2 miles/h (<4km/h) 2. Press MODE to toggle between UVI / Barometer / Rainfall readings. The corresponding icon will Light 2-8 miles/h (3-13 km/h) appear: UVI BAROMETER RAINFALL Moderate 9-25 miles/h (14-41 km/h) Strong 26-54 miles/h (42-87 km/h) To select the measurement unit fo
Inhaltszusammenfassung zur Seite Nr. 9
RAINFALL SPECIFICATIONS To view the recorded rainfall of the current hour or BASE STATION last 24 hours: Dimensions 180mm x 110mm x 47mm 1. Press SELECT to navigate to the UVI / Barometer / (L x W x H) (7.1 x 4.3 x 1.9 inches) Rainfall Area. will show next to the Area. Weight 286g (10 ounces) without 2. Press MODE repeatedly to select Rainfall display. battery 3. Press MAX / MIN repeatedly to toggle between Battery 6V adaptor; 4 x UM-3 (AA) 1.5V current hour or past 24 hour rainfall. IND
Inhaltszusammenfassung zur Seite Nr. 10
• Placement of this product on certain types of wood Memory Max wind speed may result in damage to its finish for which Oregon Battery 2 x UM-3 (AA) 1.5V batteries Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information. OUTDOOR TEMPERATURE / HUMIDITY UNIT • The contents of this manual may not be reproduced Dimensions 92 x 60 x 20 mm without the permission of the manufacturer. (L x W x H) (3.6 x 2.4 x 0.79 in) • Do not dispose old batteries as
