Inhaltszusammenfassung zur Seite Nr. 1
?O2@@@@@@@@@@@@@@@@@@@@@@6K? O2@@@@@@@@@@@@@@@@6K ?@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@6K ?O2@@@@@@@@@@@@@@@@@@@@@6K O2@@@@@@@@@@@@@@@6K? ?O2@@@@@@@@@@@@@@@@@@@@6K? O2@@@@@@@@@@@@@@6K @@@@@@@@@@ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@h@@@@@@@@@@6X ?W2@@@@@@@@@ ?O
?W2@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)K? O&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@6X? ?O2@@@@@@@@@@@@@@@@@@@@@@@@@@@6X ?@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@6X? ?@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@6K? ?@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@6K O&
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS PART 1. SPECIFICATIONS............................................................................................................................2 PART 2. IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS .........................................................3 PART 3. INITIAL STEPS FOR INSTALLING YOUR DRYER........................................................................6 PART 4. ACCESSORIES INSTALLATION .....................................................................
Inhaltszusammenfassung zur Seite Nr. 3
PART 2 IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS [SEEKING WARRANTY SERVICE] The warranty information for your dryer is located at the end of this manual. Warranty Service is available by contacting the nearest DAEWOO Service Center. If this product is installed and operated according to the instructions in this manual, DAEWOO will repair or replace any parts defective in material or workmanship throughout the warranty period, beginning with the date of purchase. WARNING! For your safety, the
Inhaltszusammenfassung zur Seite Nr. 4
[IMPORTANT SAFETY INSTRUCTIONS] WARNING! To help reduce any risk of electric shock, fire, or other personal injury or property damage when using your Appliance, please exercise care and follow basic safety precautions, including the following: 1) Read all instructions before using the appliance. 2) Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapours th
Inhaltszusammenfassung zur Seite Nr. 5
[GROUNDING INSTRUCTIONS] A. For a grounded, cord-connected appliance: This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance must be equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordina
Inhaltszusammenfassung zur Seite Nr. 6
PART 3 INITIAL STEPS FOR INSTALLING YOUR DRYER The following instructions will guide you through the initial steps of setting up your dryer. Please note that every section of this manual provides important information regarding the preparation and use of your dryer, and it is important that you review this entire manual before proceeding with any installation or use. More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are provided in other par
Inhaltszusammenfassung zur Seite Nr. 7
Minimum clearances on above, behind, and sides of the unit, as shown below, are required. Those required minimum clearances are set forth in the picture below. Please keep the following instructions in mind when installing in a closet or recessed area: • Consider allowing additional clearance for installation and servicing. • Wall, door and floor molding may necessitate additional clearances. • Additional inches of clearance are recommended to reduce noise while operating. • Consider the space n
Inhaltszusammenfassung zur Seite Nr. 8
STEP 2. Connecting the Exhaust System WARNING! • To reduce the risk of fire this appliance MUST BE EXHAUSTED OUTDOORS. • The appliance should not be exhausted into a chimney, a wall, a ceiling, or a concealed space of a building. • Only rigid or flexible metal duct should be used, for exhausting. • Do not use plastic or thin foil duct. • Failure to follow these instructions can result in death or fire. • Clean old ducts before installing this dryer. WARNING! The exhaust must be vented to the out
Inhaltszusammenfassung zur Seite Nr. 9
ALTERNATE EXHAUST DIRECTIONS 1. Remove screw and exhaust duct. 2-1. Detach and remove the knockout that 2-2. Reconnect the new duct[8.66 inch(22cm)] matches the desired venting direction to the blower housing, and fixing the duct to the base. 3-1. Insert the male end of a 4" elbow into the 3-2. Insert this assembly elbow first through female end of a short duct. Tape the joint. the hole in the dryer and push the female end of the elbow onto the male end of the blower output shaft. Tape the joi
Inhaltszusammenfassung zur Seite Nr. 10
STEP 3. Electrical Plug Connections Following steps are several warnings and instructions concerning making the electrical connection for electric dryers. More detailed information concerning the electrical connection is provided in the manual section entitled Electrical Requirements for Electric Dryer. It is important that you thoroughly review that section and the remainder of this manual, before taking any steps to install or use this dryer. 1. Use only a new UL listed No. 10 (copper wire on
Inhaltszusammenfassung zur Seite Nr. 11
STEP 4. Preparation of the Dryer Prior to the first use of this appliance, use all purpose cleaning products or a solution of detergent and water, with damp cloth to remove from the inside of the dryer drum/drying compartment any dust or dirt that may have accumulated inside the dryer. Plug-in your dryer after reviewing the following parts on your dryer’s Electrical Requirements. STEP 5. Confirming Heat Source Operation Confirming Heat Source in Electric Dryers Close the door to the dryer drum/
Inhaltszusammenfassung zur Seite Nr. 12
STEP 8. Additional Instructions for Installation of Your Dryer in a Manufactured or Mobile Home. The following instructions are applicable to installations of the dryer in a manufactured or mobile home. Any installation in a manufactured or mobile home must comply with the Manufactured Home Construction and Safety Standards and local codes and ordinances. If you are uncertain whether your proposed installation will comply with these standards, please contact a service and installation professio
Inhaltszusammenfassung zur Seite Nr. 13
PART 4 ACCESSORIES INSTALLATION Stacking Kit Installation Instructions(DRYER & PEDESTAL) To ensure safe and secure installation, please observe the instructions below. WARNING! Incorrect Installation can cause serious accidents. The weight of the dryer and the height of installation makes the stacking procedure too risky for one person. This procedure should be performed by 2 or more experienced service personnel. 1) Remove pedestal, installation hardware, and instructions are in the shipping ca
Inhaltszusammenfassung zur Seite Nr. 14
PART 5 ELECTRICAL REQUIREMENTS FOR ELECTRIC DRYERS The following are additional instructions regarding electrical connections and requirements for electric dryers. Important Warning To help prevent fire, electric shock, serious injury or death, the wiring and grounding must conform to the latest edition of the National Electrical Code, ANSI/NFPA 70 and all applicable local regulations. Please contact a qualified electrician to check your home’s wiring and fuses to ensure that your home has adequ
Inhaltszusammenfassung zur Seite Nr. 15
Review the following options to determine the appropriate electrical connection for your home: Use the instructions in this section if your home has a Use the instructions in this section if your home has a 4-wire receptacle (NEMA type 14-30R) and you will be 3-wire receptacle (NEMA type 10-30R) and you will be using a UL listed, 120/240 volt minimum, 30 amp, using a UL listed, 120/240 volt minimum, 30 amp, dryer power supply cord. dryer power supply cord. 4-wire receptacle 3-wire receptacle (
Inhaltszusammenfassung zur Seite Nr. 16
4-wire connection : Direct wire Important : Grounding through the neutral conductor is prohibited for (1) new branch-circuit installations, (2) mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through the neutral conductor. Prepare minimum 5 ft (1.52 m) of length in order for dryer to be replaced. First, peel 5 inches (12.7 cm) of covering material from end. Strip 5 inches of ground wire insulation. After cutting 11/2 inch (3.8 cm) from 3 other wires pe
Inhaltszusammenfassung zur Seite Nr. 17
3-wire connection : Direct wire Important : Grounding through the neutral conductor is prohibited for (1) new branch-circuit installations, (2) mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through the neutral conductor. Prepare minimum 5 ft (1.52 m) of length in order for dryer to be replaced. First, strip 3 1/2 inches (8.9 cm) of outer sheath from end and strip 1 inch of insulation from each conductor. Then, put the hooked shape end of the wire und
Inhaltszusammenfassung zur Seite Nr. 18
Option 1: 4-wire connection with a power supply cord. • lf your local codes or ordinances do not allow the use of a 3-wire connection, or you are installing your dryer in a mobile home, you must use a 4-wire connection. 1. Connect neutral wire (white) of power cord to center terminal block screw. 2. Connect red and black wires to the left and right terminal block screws. 3. Connect ground wire (green) of power cord to external ground screw and move neutral ground wire of appliance and connect it
Inhaltszusammenfassung zur Seite Nr. 19
Option 2: 3-Wire connection with a power supply cord. lf your local codes or ordinances permit the connection of a frame-grounding conductor to the neutral wire, use these instructions. If your local codes or ordinances do not allow the connection of a frame-grounding conductor to the neutral wire, use the instructions under Section 1: Optional 3- wire connection. ? ? ? ? ? ? ? ? @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Inhaltszusammenfassung zur Seite Nr. 20
PART 6 USER-MAINTENANCE INSTRUCTIONS Following are important instructions and information concerning the exhaust requirements for your dryer. Important Warning To reduce the risk of fire, electric shock, or injury to person, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. To reduce the risk of fire, combustion, or accumulation of combustible gases, DO NOT exhaust dryer air into an enclosed and unventilated area, such as an attic, wall, ceiling, crawl space, chimney, gas v
