Inhaltszusammenfassung zur Seite Nr. 1
CD RECEIVER KD-S33
RECEPTOR CON CD KD-S33
For canceling the display demonstration, see page 7.
Para cancelar la demostración en pantalla, consulte la página 7.
For installation and connections, refer to the separate manual.
For customer Use:
Para la instalación y las conexiones, refiérase al manual separado.
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet. Retain
this information for future
reference.
INSTRUCTIONS
Model No.
MANUAL DE INSTRUCC
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
Inhaltszusammenfassung zur Seite Nr. 3
The following marks are used to indicate... CONTENTS : Built-in CD player operations. : External CD changer operations. Control panel ................................. 4 : Indicator displayed for the Remote controller — RM-RK50 ............ 5 corresponding operation. Getting started ............................... 6 Basic operations ................................................. 6 How to reset your unit Radio operations ............................ 7 Disc operations .....................
Inhaltszusammenfassung zur Seite Nr. 4
Control panel Parts identification Display window 1 4 /¢ buttons o DISP (display) button 2 (standby/on attenuator) button ; (control panel release) button 3 5 (up) / ∞ (down) buttons a Disc information indicators—TAG (ID3 Tag), 4 Loading slot (folder), (track/file) 5 Display window s Disc type indicators—WMA, MP3 6 0 (eject) button d Playback source indicators— 7 EQ (equalizer) button CH: Lights up only when CD-CH is selected as the 8 Remote sensor playback source. DO NOT expose the remot
Inhaltszusammenfassung zur Seite Nr. 5
Main elements and features Remote controller — RM-RK50 Installing the lithium coin battery (CR2025) For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special 1 (standby/on/attenuator) button handling may apply. • Turns the power on if pressed briefly or See www.dtsc.ca.gov/hazardouswaste/perchlorate attenuates the sound when the power is on. • Turns the power off if pressed and held. Aim the remote controller directly at th
Inhaltszusammenfassung zur Seite Nr. 6
4 SOUND button ! • Selects the sound mode (C-EQ: custom equalizer). • For FM/AM tuner 5 SOURCE button • Selects the source. 6 2 R (reverse) / F (forward) 3 buttons • Searches for stations if pressed briefly. • For SIRIUS radio • Fast-forwards or reverses the track if pressed and held. • Changes the tracks if pressed briefly. • For XM radio • While listening to the satellite radio: – Changes the channels if pressed briefly. – Changes the channels rapidly if pressed and held. • While
Inhaltszusammenfassung zur Seite Nr. 7
! Start searching for a station. Basic settings • See also “General settings — PSM” on pages 12 – 14. When a station is received, searching stops. 1 To stop searching, press the same button again. 2 To tune in to a station manually In step ! above... 1 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute. 2 Select a desired station frequency. 3 Finis
Inhaltszusammenfassung zur Seite Nr. 8
Storing stations in memory Listening to a preset station You can preset six stations for each band. 1 FM station automatic presetting — 2 Select the preset station (1 – 6) you want. SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to or store into. 2 To check the other information while listening to an FM or AM station 3 Clock Ô Frequency “SSM” flashes, then disappears when automatic presetting is over. Disc operations Local FM stations with the stronges
Inhaltszusammenfassung zur Seite Nr. 9
To fast-forward or reverse the track Playing discs in the CD changer All discs in the magazine will be played repeatedly until you change the source. • Ejecting the magazine will also stop playing. To go to the next or previous tracks ~ * If you have changed the external input setting to “EXT IN” (see page 14), you cannot select the CD changer. To go to the next or previous folders (only for MP3 or WMA discs) Ÿ Select a disc. For disc number from 01 – 06: For MP3 discs: For WMA discs:
Inhaltszusammenfassung zur Seite Nr. 10
Other main functions Changing the display information Skipping tracks quickly during play While playing an audio CD or a CD Only possible on JVC Text MP3-compatible CD changer • For MP3 or WMA discs, you can skip tracks within the same folder. Ex.: To select track 32 while playing a track whose 2 * While playing an MP3 or a WMA disc number is a single digit (1 to 9) • When “TAG DISP” is set to “TAG ON” (see page 14) 1 2 • When “TAG DISP” is set to “TAG OFF” Each time you press the butt
Inhaltszusammenfassung zur Seite Nr. 11
Selecting the playback modes Sound adjustments You can use only one of the following playback modes You can select a preset sound mode suitable to the at a time. music genre (C-EQ: custom equalizer). 1 2 Select your desired playback mode. 7 Repeat play Ex.: When “ROCK” is selected Mode Plays repeatedly Preset values TRK RPT : The current track. BAS TRE LOUD 1 (bass) (treble) (loudness) FLDR RPT* : All tracks of the current folder. Indication (For) USER 2 00 00 OFF DISC RPT* : All tracks of
Inhaltszusammenfassung zur Seite Nr. 12
2 General settings — PSM You can change PSM (Preferred Setting Mode) items (except “SID”) listed in the table that follows. Indication [Range] 1 1 BAS* (bass) Adjust the bass. [–06 to +06] 1 TRE* (treble) 2 Select a PSM item. Adjust the treble. [–06 to +06] 2 FAD* (fader) Adjust the front and rear speaker balance. [R06 to F06] 3 BAL* (balance) Adjust the left and right speaker balance. [L06 to R06] Ex.: When “DIMMER” is selected 1 LOUD* (loudness) Boost low and high frequencies to produce a
Inhaltszusammenfassung zur Seite Nr. 13
Indication Item Setting, [reference page] ( : Initial) DEMO • DEMO ON : Display demonstration will be activated automatically if no Display demonstration operation is done for about 20 seconds, [7]. • DEMO OFF : Cancels. CLOCK H 1 – 12 [Initial: 1 (1:00)], [7] Hour adjustment CLOCK M 00 – 59 [Initial: 00 (1:00)], [7] Minute adjustment 1 CLK ADJ* • AUTO : The built-in clock is automatically adjusted using the clock data Clock adjustment provided via the satellite radio channel. • OFF : Ca
Inhaltszusammenfassung zur Seite Nr. 14
Indication Item Settings, [reference page] ( : Initial) 5 WOOFER* • LOW : Frequencies lower than 90 Hz are sent to the subwoofer. Subwoofer cutoff • MID : Frequencies lower than 135 Hz are sent to the subwoofer. frequency • HIGH : Frequencies lower than 180 Hz are sent to the subwoofer. 6 EXT IN* • CHANGER : To use a JVC CD changer, [9], a JVC compatible satellite (SIRIUS/ External input XM) tuner, [15], an Apple iPod or a JVC D. player, [18]. • EXT IN : To use any other external componen
Inhaltszusammenfassung zur Seite Nr. 15
Activate your SIRIUS subscription after Satellite radio operations connection: 1 This unit is satellite (SAT) Radio Ready—compatible with both SIRIUS Satellite radio and XM Satellite radio. 2 Before operating your satellite radio: • For connection, see Installation/Connection Manual JVC DLP starts updating all the SIRIUS channels. (separate volume). • Refer also to the Instructions supplied with your Once completed, JVC DLP tunes in to the preset SIRIUS Satellite radio or XM Satellite
Inhaltszusammenfassung zur Seite Nr. 16
Searching for category/channel Listening to the SIRIUS Satellite radio You can search for programs by category (Category 1 Search) or channel number (Channel Search). • In Category Search, you can tune in to the channels of the selected category. Category Search begins from 2 the currently selected channel. The selected channel number flashes on the display. • In Channel Search, you can tune in to all channels 3 Select a category. (including non-categorised channels). 1 Select a category
Inhaltszusammenfassung zur Seite Nr. 17
Checking the XM Satellite radio ID Listening to a preset channel While selecting “XM1,” “XM2,” or “XM3,” select 1 Select either SIRIUS Satellite radio or XM “Channel 0.” Satellite radio. 2 The display alternately shows “RADIO ID” and the 8-digit (alphanumeric) ID number. 3 Select the preset channel (1 – 6) you want. To cancel the ID number display, select any channel other than “Channel 0.” To change the display information while listening to a channel Storing channels in memory You can p
Inhaltszusammenfassung zur Seite Nr. 18
® ⁄ Adjust the sound as you want. (See iPod /D. player operations pages 11 and 12.) • Make sure the equalizer on the iPod or D. This unit is ready for operating an Apple iPod or a JVC player is deactivated. D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately 1 2 To pause* or stop* purchased) to the CD changer jack on the rear of this playback unit. To resume playback, press it • Interface adapter for iPod —KS-PD100 fo
Inhaltszusammenfassung zur Seite Nr. 19
3 Confirm the selection. 7 Random play To move back to the previous menu, press 5. 4 ALBM RND* Functions the same as “Shuffle Albums” of the • If a track is selected, playback starts iPod. automatically. SONG RND/RND ON • If the selected item has another layer, you will enter the layer. Repeat steps 2 and 3 until the Functions the same as “Shuffle Songs” of the iPod or “Random Play = On” of the D. player. desired track is played. • Holding 4 /¢ can skip 10 items at RND OFF a time. Cance
Inhaltszusammenfassung zur Seite Nr. 20
Other external component More about this unit operations Basic operations Turning on the power You can connect an external component to the CD changer jack on the rear using the Line Input • By pressing SRC on the unit, you can also turn on the Adapter—KS-U57 (not supplied) or AUX Input power. If the source is ready, playback also starts. Adapter—KS-U58 (not supplied). • For connection, see Installation/Connection Manual Turning off the power (separate volume). • If you turn off the power
