Inhaltszusammenfassung zur Seite Nr. 3
Handling Cassette Tapes 6. REMOTE CONTROL 1. FEATURES Using any of the following types of cassette • Avoid using cassettes of 120 minutes or tapes can cause malfunctions. longer. (Such cassettes have extremely thin Receiver for remote control unit n Rotary Encoder Volume Control with Multi-Color Prism Key tape, so the tape can become stretched or • Cassette tapes with low recording levels n Touch-n-Go Flip Down Detachable Face cut.) OPEN • Cassette tapes in which the unrecorded sec- ARX8570z n C
Inhaltszusammenfassung zur Seite Nr. 4
3. CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE 5. DCP Note: The control panel can be detached to prevent theft. When detaching the control panel, store it in the • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. Source unit / Appareil pilote / Unidad fuente We recommend taking the DCP with you when leaving the car. Names of Buttons Removing the DCP Attaching the DCP 1 OPEN
Inhaltszusammenfassung zur Seite Nr. 5
Functions of Remote Control Unit Buttons CD changer Mode Radio Tape TV Button MD changer ) FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, tape, CD changer, MD changer and TV. Á BAND Switches the side of Moves the next disc Switches reception Switches reception DISC UP the tape. in increasing order. band. band. PROG TOP ª VOLUME Increases and decreases volume (in all modes). £ SEARCH Moves preset Fast-forward and Moves tracks up Moves prese
Inhaltszusammenfassung zur Seite Nr. 6
7. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Radio mode Tape mode CD changer CAUTION mode MD changer mode TV mode Radio mode... Be sure to lower the volume before switch- ing off the unit power or the ignition key. The * External equipment not connected with CeNET is not displayed. unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the p
Inhaltszusammenfassung zur Seite Nr. 7
Basic Operations * Once selected, the preferred display becomes 3. When the adjustment is complete, press A-M the display default. When a function adjustment button # several times until the function mode such as volume is made, the screen will mo- is reached. mentarily switch to that function’s display, then revert back to the preferred display several Setting tone bypass seconds after the adjustment. * When you have entered a title in a CD, it ap- The tone bypass disables the tone (bass and pe
Inhaltszusammenfassung zur Seite Nr. 8
Basic Operations Adjusting the balance 1. Press and hold LOUD button # for 1 second or longer to turn on the loudness effect. When 1. Press A-M button # and select “BALANCE”. the loudness effect is turned on, “LD” lights in 2. Turning the Rotary knob % clockwise empha- the display. sizes the sound from the right speaker; turn- 2. Press and hold LOUD button # for 1 second ing it counterclockwise emphasizes the sound or longer to turn off the loudness effect. “LD” from the left speaker. goes off
Inhaltszusammenfassung zur Seite Nr. 9
Radio Operations FM reception Manual tuning ® For enhanced FM performance the There are 2 ways available: Quick tuning and step tuner includes signal actuated stereo control, tuning. Enhanced Multi AGC, Impulse noise reduction When you are in the step tuning mode, the fre- circuits and Multipath noise reduction circuits. quency changes one step at a time. In quick tun- ing mode, you can quickly tune the desired fre- quency. Changing the reception area 1. Press BND button @ and select the desired
Inhaltszusammenfassung zur Seite Nr. 10
Radio Operations Tape Operations Auto store Loading a tape Auto store is a function for storing up to 6 sta- 1. Press OPEN button 1 to access the cassette tape insertion slot behind the FLIP DOWN tions that are automatically tuned in sequentially. If 6 stations cannot be received, a previously PANEL. stored station remains unoverwritten at the 2. Load a tape into the cassette tape insertion memory position. slot. “LOADING” appears in the display and starts playing. 1. Press BND button @ and sele
Inhaltszusammenfassung zur Seite Nr. 11
Tape Operations Notes: * If you select another mode during APC mode, it is selected with APC mode continued. • If the FILP DOWN PANEL does not open fully, gen- tly open with your hand. The mechanism automatically makes APC mode stop when it finds the next track (in APC-FF) or • The radio mode is selected automatically 4 seconds the start of the current track (in APC-REW). This after Eject button & is pressed. function is called “monitor mode”. If the auto antenna terminal for this unit is connec
Inhaltszusammenfassung zur Seite Nr. 12
Tape Operations Other Handy Functions Setting the clock Tape selection repeat 1. Press and hold ADJ button 4 for 1 second or The tape selection repeat continuously plays the longer to switch to the adjustment selection current track. This function continues automatically display. until it is canceled. 1. Press RPT button 6. “RPT” lights in the dis- 2. Press the right or left side of SEARCH button play and the current track is repeated. $ to select “CLOCK”. 2. To cancel the repeat play, press RPT
Inhaltszusammenfassung zur Seite Nr. 13
Other Handy Functions Entering titles 5. Press and hold ENT button 2 for 2 seconds or longer to clear the title and cancel the title Titles up to 10 characters long can be stored in input mode. memory and displayed for radio stations and CDs. The numbers of titles that can be entered Adjusting the display contrast for each mode are as follows. You can adjust the display contrast according to Mode Number of titles the angle of installation of the unit. Radio mode 30 titles * The factory default s
Inhaltszusammenfassung zur Seite Nr. 14
Other Handy Functions 5. Pressing ENT button 2 returns to the adjust- 5. Pressing ENT button 2 returns to the adjust- ment selection display. ment selection display. 6. Press ADJ button 4 to return to the previous 6. Press ADJ button 4 to return to the previous mode. mode. Message display Triggered audio mute for cellular telephones When the unit is powered on or off, a message is displayed. The user can turn this message dis- This unit requires special wiring to mute the au- play on or off. dio
Inhaltszusammenfassung zur Seite Nr. 15
8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions Selecting a CD When an optional CD changer is connected Each of the Direct button 9 corresponds to a through the CeNET cable, this unit controls all disc loaded into the magazine. the CD changer functions. This unit can control l Selecting a disc from 1 to 6 a total of 2 changers (MD and/or CD). Press the corresponding Direct button 9 (1 to Press FNC button 3 and select the CD changer 6) to select the desired disc. mode to s
Inhaltszusammenfassung zur Seite Nr. 16
CD Changer Operations Top function Disc repeat play The top function plays from the first track (track After all the tracks on the current disc have been No. 1) of the disc. played, the disc repeat play automatically replays the current disc over from the first track. This func- l When playing a disc 1 to 6 tion continues automatically until it is canceled. Press the Direct button 9 (1 to 6) with the same 1. Press and hold RPT button 6 for 1 second number as the CD playing. or longer. “DISC” and
Inhaltszusammenfassung zur Seite Nr. 17
MD Changer Operations MD changer functions 2. Each time you press the right side of SEARCH button $, the track advances ahead to the When an optional MD changer is connected beginning of the next track. through the CeNET cable, this unit controls all l Track-down the MD changer functions. This unit can control a total of 2 changers (MD and/or CD). 1. Press the left side of SEARCH button $ to move back to the beginning of the current track. Press FNC button 3 and select the MD changer mode to sta
Inhaltszusammenfassung zur Seite Nr. 18
MD Changer Operations TV Operations Repeat play TV tuner functions The repeat play continuously plays the current When an optional TV tuner is connected through track. This function continues automatically until the CeNET cable, this unit controls all TV tuner it is canceled. functions. To watch TV requires a TV tuner and monitor. 1. Press RPT button 6. “RPT” lights in the dis- play and the current track is repeated. Watching a TV 2. To cancel the repeat play, press RPT button 6 again. “RPT” goe
Inhaltszusammenfassung zur Seite Nr. 19
TV Operations Manual tuning 1. Press BND button @ and select the desired TV band (TV1 or TV2). There are 2 ways available: Quick tuning and step 2. Press and hold AS button 5 for 2 seconds or tuning. longer. The stations with good reception are When you are in the step tuning mode, the fre- automatically stored to the Preset buttons 9. quency changes one step at a time. In quick tun- ing mode, you can quickly tune the desired fre- quency. Preset scan 1. Press BND button @ and select the desired
Inhaltszusammenfassung zur Seite Nr. 20
DSP Operations DSP control function 4. Turn the Rotary knob % clockwise or coun- terclockwise to set the sensitivity of the spec- If the DSP (DPH7500z), sold separately, is con- trum analyzer. nected to this unit using the CeNET cable, all the functions of the DSP can be controlled. You can choose one of “LOW”, “MID-LOW”, “MID”, “MID-HIGH” or “HIGH” for the sensi- tivity of the spectrum analyzer. DSP functions 5. Pressing ENT button 2 returns to the adjust- There are 2 modes available in DPH7500
Inhaltszusammenfassung zur Seite Nr. 1
Owner’s manual
Mode d’emploi
Manual de instrucciones
ARX8570z
AM/FM CASSETTE PLA YER
WITH CD/MD CHANGER CONTROL
•
LECTEUR DE CASSETTE AM/FM A VEC
COMMANDE DE CHANGEUR CD/MD
•
RADIO DE AM/FM Y REPRODUCT OR DE
CASETES CON CONTROL DE CAMBIADOR DE
DISCOS COMAPCT OS/MINIDISCOS
OPEN
ARX8570z
ISR
1 234 5 6
Clarion Co., Ltd.
PE-1637B
All Rights Reserved. Copyright © 1998: Clarion Co., Ltd.
1999/1 (A·C) 280-7231-00
Printed in China / Imprimé en Chine / Inpreso en China
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing the Clarion ARX8570z. 11. ESPECIFICACIONES * Please read this owner’s manual in its entirety before operating this equipment. * After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Sintonizador de FM Audio * Check the contents of the enclosed warranty card and keep it carefully with this manual. * This manual includes the operating procedures of the CD changer, MD changer, TV tuner and digital Gama de frecuencias: Salida máxima de pot
