Bedienungsanleitung Desa BY150CE

Bedienungsanleitung für das Gerät Desa BY150CE

Gerät: Desa BY150CE
Kategorie: Elektrovorwärmer
Produzent: Desa
Größe: 0.54 MB
Datum des Hinzufügens: 4/4/2014
Seitenanzahl: 32
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Desa BY150CE zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Desa BY150CE finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Desa BY150CE auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Desa BY150CE im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Desa BY150CE auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Desa BY150CE Handbuch - Online PDF
Advertisement
« Page 1 of 32 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Desa BY150CE Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Desa BY150CE befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

R
PORTABLE
FORCED
AIR HEATERS
OWNER’S MANUAL
Heater Sizes: 30,000 70,000 90,000 150,000 Btu/Hr
Models: BY30CE, BY70CE, BY100CE, and BY150CE
IMPORTANT
Read and understand this manual before assembling, starting or servicing
heater. Improper use of heater can cause serious injury. Keep this manual
for future reference.

Inhaltszusammenfassung zur Seite Nr. 2

SECTION PAGE CONTENTS Safety Information ................................................................................ 2 Product Identification ........................................................................... 4 Unpacking............................................................................................. 5 Assembly .............................................................................................. 5 Theory of Operation .............................................

Inhaltszusammenfassung zur Seite Nr. 3

SAFETY WARNINGS (Continued) • Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use INFORMATION gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels. Continued • Fueling a) Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions and applicable regulations regarding the safe fu- eling of heating units. b) Only the type of fuel specified on the heater's data plate shall be used. c) All flame,

Inhaltszusammenfassung zur Seite Nr. 4

Hot Air Outlet PRODUCT Handle Upper Shell IDENTIFICATION Fan Guard Lower Shell Air Filter End Cover Fuel Tank Fuel Cap Side Cover Flame-Out Control Reset Button Power Cord Figure 1 - 30/70,000 Btu/Hr Models Hot Air Outlet Upper Shell Lower Shell Fuel Cap Fan Guard Fuel Tank Side Cover Power Cord Flame-Out Control Reset Button Figure 2 - 90/150,000 Btu/Hr Models 4 102422

Inhaltszusammenfassung zur Seite Nr. 5

1. Remove all packing items applied to heater for shipment. UNPACKING 2. Remove all items from carton. 3. Check items for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater. These models are furnished with wheels and handles. Wheels, handles, and the ASSEMBLY mounting hardware are found in the shipping carton. (For 90,000 and 150,000 Tools Needed Btu/Hr Models Only) • Medium Phillips Screwdriver • 3/8" Open or Adjustable Wrench • Hammer 1. Slide axle throug

Inhaltszusammenfassung zur Seite Nr. 6

The Fuel System: The air pump forces air through the air line. The air is then THEORY OF pushed through the burner head nozzle. This air causes fuel to lift from the tank. A OPERATION fine mist of fuel is sprayed into the combustion chamber. The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air. The Ignition System: The electronic ignitor sends voltage to the spark plug. The spark plug igni

Inhaltszusammenfassung zur Seite Nr. 7

VENTILATION WARNING Follow the minimum fresh, outside air ventilation requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater. Provide a fresh air opening of at least 2800 square cm (three square feet) for each 100,000 BTU/Hr rating. Provide extra fresh air if more heaters are being used. Example: A 150,000 Btu/Hr heater requires one of the following: • a two-car garage door

Inhaltszusammenfassung zur Seite Nr. 8

To Stop Heater OPERATION 1. Unplug power cord from outlet. Continued To Restart Heater 1. Wait 2 minutes after stopping heater. 2. Repeat steps under To Start Heater, page 7. Note: If shipping, transport companies require fuel tanks to be empty. STORING, 1. Drain fuel tank. TRANSPORTING, Note: Some models have drain plug on underside of fuel tank. If so, remove drain plug to drain all fuel. If heater does not have drain plug, drain fuel OR SHIPPING through fuel cap opening. Be sure all fuel is r

Inhaltszusammenfassung zur Seite Nr. 9

TROUBLE- WARNING SHOOTING Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur. OBSERVED FAULT POSSIBLE CAUSE REMEDY Wrong pump pressure See Pump Pressure Heater ignites, but flame-out control Adjustment, page 14. shuts off heater after Dirty air output, air intake, See Air Output, Air Intake a short period of and lint filters and Lint Filters, page 14. time. Dirty fuel filter See Fuel Filter, page 11. Dirt in nozzle See Nozzle, pages 15 a

Inhaltszusammenfassung zur Seite Nr. 10

SERVICE WARNING PROCEDURES Never service heater while it is plugged in, operating, or hot. Severe burns and electrical shock can occur. Upper Shell Upper Shell Removal 1. Remove screws and lock washers along each side of heater using 5/16" nut- Fan Guard driver. These screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. Figure 7 - Upper Shell Removal, 30/70,000 Btu/Hr Models Upper Shell Fan Guard Figure 8 - Upper Shell Removal, 90/150,000 Btu/Hr Models 10

Inhaltszusammenfassung zur Seite Nr. 11

Fuel Filter Fuel Filter (30/70,000 Btu/Hr Models) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull rubber fuel line off fuel filter neck. 4. Carefully pry bushing and fuel filter out of fuel tank. 5. Wash fuel filter with clean fuel and replace in tank. 6. Attach rubber fuel line to Side Cover fuel filter neck. 7. Replace side cover. Fuel Line Figure 9 - Fuel Filter Removal, 30/70,000 Btu/Hr Models Fuel Filter (90/150,000 Btu/Hr Models) Fuel Filter, Bushing, 1. Remov

Inhaltszusammenfassung zur Seite Nr. 12

Spark Plug Combustion (30,000 Btu/Hr Model) Chamber 1. Remove upper shell (see page 10). 2. Remove fan (see page 18). 3. Remove fuel and air line hoses from nozzle Spark Plug Burner assembly. Mounting Nut Strap Spark 4. Remove spark plug wire Plug Spark Plug from spark plug. Wire 5. Remove two screws using 5/16" nut-driver and remove burner strap. 6. Place hex-body of spark plug into vise and tighten. 7. Remove spark plug Nozzle mounting nut using 11/16" Assembly open-end wrench. 8. Remove burne

Inhaltszusammenfassung zur Seite Nr. 13

Spark Plug (70/90/150,000 Btu/Hr Models) Spark Plug Burner 1. Remove upper shell (see Wire Head page 10). 2. Remove fan (see page 18). 3. Remove spark plug wire from spark plug. 4. Remove spark plug from burner head using 13/16" open-end wrench. Spark 5. Clean and regap spark plug Plug electrodes as follows: 70/90,000 Btu/Hr Models: 1.4 mm (.055") gap 150,000 Btu/Hr Model: 2.2 mm (.085") gap 6. Install spark plug in burner Figure 14 - Spark Plug Removal, 70/90/150,000 Btu/Hr Models head. 7. Atta

Inhaltszusammenfassung zur Seite Nr. 14

Air Intake Filter Air Output, Air Intake, Filter End and Lint Filters Cover Fan Guard 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. Lint Filter 3. Remove filter end cover. Air Output 4. Replace air output and lint Filter filters. 5. Wash or replace air intake filter (see Preventative Maintenance Schedule, Figure 16 - Air Output, Air Intake, and Lint Filters, page 8). 30/70,000 Btu/Hr Models 6. Replace filter end cover. Air Intake Filter 7. Replace fan

Inhaltszusammenfassung zur Seite Nr. 15

Combustion Nozzle Chamber (30,000 Btu/Hr Model) 1. Remove upper shell (see page 10). 2. Remove fan (see page 18). 3. Remove fuel and air line hoses from nozzle assem- bly. 4. Turn nozzle assembly 1/4 Nozzle turn to left and pull toward Assembly motor to remove. 5. Place plastic hex-body into vise and lightly tighten. 6. Carefully remove nozzle from the nozzle adapter Fuel Line Hose using 5/8" socket wrench. Air Line Hose 7. Blow compressed air thru face of nozzle. This will Figure 20 - Removing

Inhaltszusammenfassung zur Seite Nr. 16

Nozzle (70/90/150,000 Btu/Hr Models) Combustion 1. Remove upper shell (see Chamber page 10). 2. Remove fan (see page 18). 3. Remove fuel and air line hoses from burner head. Spark Plug 4. Remove spark plug wire Burner Head Wire from spark plug. 5. Remove spark plug from burner head using 13/16" open-end wrench. 6. Remove three screws using 5/16" nut-driver and Screw remove burner head from Spark combustion chamber. Plug 7. Place burner head into vise and lightly tighten. 8. Carefully remove nozz

Inhaltszusammenfassung zur Seite Nr. 17

Blade Air Pump Rotor Pump Intake (Procedure if rotor is binding) Plate Filter 1. Remove upper shell (see Filter End page 10). Cover 2. Remove filter end cover Fan Guard screws using 5/16" nut- driver. 3. Remove filter end cover Insert and air filters. Rotor 4. Remove pump plate Air Output screws using 5/16" nut- Filter driver. 5. Remove pump plate. Figure 25 - Rotor Location, 30/70,000 Btu/Hr Models 6. Remove rotor, insert, and blades. Pump Blade Plate 7. Check for debris in pump. Air Intake If deb

Inhaltszusammenfassung zur Seite Nr. 18

Fan IMPORTANT: Remove fan from motor shaft before removing motor from heater. The weight of the motor Fan Setscrew resting on the fan could damage the fan pitch. 1. Remove upper shell (see page 10). 2. Use 1/8" allen wrench to loosen setscrew which holds fan to motor shaft. Motor 3. Slip fan off motor shaft. Shaft 4. Clean fan using a soft cloth moistened with kerosene or solvent. 5. Dry fan thoroughly. Figure 29 - Fan, Motor Shaft, and Setscrew Location 6. Replace fan on motor shaft. Place fan

Inhaltszusammenfassung zur Seite Nr. 19

230V/50Hz WIRING Blue Brown DIAGRAMS Green/Yellow White White B Spark Plug Flame- White Blue Blue Orange Terminal Reset Ignitor Motor Out Board Button Control Photocell Red Red Green/ R Yellow Red Figure 31 - Wiring Diagram, 30/150,000 Btu/Hr Models 230V/50Hz Blue Brown Green/Yellow White White B Spark Plug Flame- Orange White Blue Blue Terminal Reset Ignitor Motor Out Board Button Control Photocell Red Red Green/ R Yellow Red Red S or 2 M or 3 Black Motor Start Relay L or 1 Figure 32 - Wiring D

Inhaltszusammenfassung zur Seite Nr. 20

ILLUSTRATED 3 1 PARTS 43 BREAKDOWN 2 30,000 Btu/Hr Model 4 11-5 11-1 5 11-2 6 11 8 7 9 11-4 15 11-3 13 12 18 13 16 23 17 19 24 20 21 22 43 33 34 25 44 27 41 43 31 29 26 42 30 37 28 35 32 36 18-1 38 18-2 18-3 18-4 14 10 18-5 39 18-6 18-7 40 18-18 18-8 18-17 18-9 18-16 18-10 18-15 18-11 18-14 18-12 Motor and Pump Assembly 18-13 20 102422


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Desa 000 BTU SPC-30R Handbuch Elektrovorwärmer 0
2 Desa 000 Btu/hr Models Handbuch Elektrovorwärmer 0
3 Desa 000-12 Handbuch Elektrovorwärmer 0
4 Desa 100 Handbuch Elektrovorwärmer 0
5 Desa 104504-02 Handbuch Elektrovorwärmer 0
6 Desa 000-15 Handbuch Elektrovorwärmer 0
7 Desa 000-30 Handbuch Elektrovorwärmer 0
8 Desa 050 BTU Handbuch Elektrovorwärmer 0
9 Desa 105801-09 Handbuch Elektrovorwärmer 0
10 Desa 105838-02 Handbuch Elektrovorwärmer 0
11 Desa 10 Handbuch Elektrovorwärmer 0
12 Desa 101811-01C.pdf Handbuch Elektrovorwärmer 0
13 Desa 000-24 Handbuch Elektrovorwärmer 0
14 Desa 104506-02 Handbuch Elektrovorwärmer 0
15 Desa 106040-02 Handbuch Elektrovorwärmer 0
16 A.O. Smith AH - 290 Handbuch Elektrovorwärmer 6
17 A.O. Smith AHD 290 Handbuch Elektrovorwärmer 7
18 A.O. Smith AHDS 290 Handbuch Elektrovorwärmer 0
19 A.O. Smith ST 3000 Handbuch Elektrovorwärmer 5
20 A.O. Smith WATER HEATERS Handbuch Elektrovorwärmer 13