Bedienungsanleitung Desa VP22IT

Bedienungsanleitung für das Gerät Desa VP22IT

Gerät: Desa VP22IT
Kategorie: Elektrovorwärmer
Produzent: Desa
Größe: 3.78 MB
Datum des Hinzufügens: 9/23/2013
Seitenanzahl: 34
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Desa VP22IT zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Desa VP22IT finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Desa VP22IT auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Desa VP22IT im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Desa VP22IT auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Desa VP22IT Handbuch - Online PDF
Advertisement
« Page 1 of 34 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Desa VP22IT Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Desa VP22IT befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

UNVENTED (VENT-FREE)
INFRARED GAS HEATER
SAFETY INFORMATION AND
®
INSTALLATION MANUAL
For more information, visit www.desatech.com
For more information, visit www.desatech.com
VN18, VN18T
VP16, VP16T
VP26, VP26T
VN30, VN30T
VP16IT, VN18IT
VP22IT, VN25IT
Model VN30 Shown
WARNING: Improper installation,
WARNING: If the information in this manual is not
adjustment, alteration, service, or
followed exactly, a fire or explosion may result caus-
maintenance can cause injury or
ing property damage, per

Inhaltszusammenfassung zur Seite Nr. 2

TABLE OF CONTENTS 2 SAFETY INFORMATION TABLE OF CONTENTS SPECIFICATIONS .................................................................... 18 SAFETY INFORMATION ............................................................ 2 TROUBLESHOOTING .............................................................. 19 LOCAL CODES ........................................................................... 3 ILLUSTRATED PARTS BREAKDOWN AND PARTS LIST ....... 22 PRODUCT IDENTIFICATION .........................

Inhaltszusammenfassung zur Seite Nr. 3

SAFETY INFORMATION 3 LOCAL CODES 3 PRODUCT IDENTIFICATION UNPACKING PRODUCT FEATURES SAFETY INFORMATION PRODUCT IDENTIFICATION Continued Control Knob 4. If you smell gas Ignitor Button • Shut off gas supply • Do not try to light any appliance • Do not touch any electrical switch; do not use any phone in your building • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions • If you cannot reach your gas supplier, call the fire department 5. Always run

Inhaltszusammenfassung zur Seite Nr. 4

AIR FOR COMBUSTION AND VENTILATION Providing Adequate Ventilation 4 AIR FOR COMBUSTION AND VENTILATION Unusually tight construction is defined as construction WARNING: This heater shall not be installed in a where: confined space or unusually tight construction un- a. walls and ceilings exposed to the outside atmosphere less provisions are provided for adequate combustion have a continuous water vapor retarder with a rating and ventilation air. Read the following instructions to -11 2 of one pe

Inhaltszusammenfassung zur Seite Nr. 5

AIR FOR COMBUSTION AND VENTILATION 5 Determining Fresh-Air Flow For Heater Location 5 AIR FOR COMBUSTION AND VENTILATION Continued 4. Compare the maximum Btu/Hr the space can support with the actual DETERMINING FRESH-AIR FLOW FOR amount of Btu/Hr used. HEATER LOCATION __________________ Btu/Hr (maximum the space can support) Determining if You Have a Confined or __________________ Btu/Hr (actual amount of Btu/Hr used) Unconfined Space Example: 51,200 Btu/Hr (maximum the space can support) Use th

Inhaltszusammenfassung zur Seite Nr. 6

AIR FOR COMBUSTION AND VENTILATION Ventilation Air 6 AIR FOR COMBUSTION AND VENTILATION Continued VENTILATION AIR 12" Ventilation Air From Inside Building This fresh air would come from an adjoining unconfined space. When ventilating to an adjoining unconfined space, you must provide two permanent openings: one within 12" of the ceiling and Ventilation Grills Into Adjoining Room, one within 12" of the floor on the wall connecting the two spaces Ventilation Option 2 (see options 1 and 2, Figure

Inhaltszusammenfassung zur Seite Nr. 7

INSTALLATION 7 Check Gas Type 7 Installation Items Locating Heater INSTALLATION NOTICE: This heater is intended for use as supple- WARNING: Never install the heater mental heat. Use this heater along with your primary • in a bedroom or bathroom heating system. Do not install this heater as your • in a recreational vehicle primary heat source. If you have a central heating • where curtains, furniture, clothing, or other flam- system, you may run system’s circulating blower mable objects are less

Inhaltszusammenfassung zur Seite Nr. 8

INSTALLATION Thermostat Sensing Bulb 8 Installing Heater To Wall INSTALLATION Continued THERMOSTAT SENSING BULB Removing Front Panel Of Heater (Thermostat Models Only) 1. Remove the four painted screws, two on each side of front panel. 2. Pull bottom of front panel forward, then out. The thermostat sensing bulb has been placed inside the heater for protection during shipping. 3. Remove any remaining packaging materials. Locating Thermostat Sensing Bulb (for Thermostat Applications) 1. Remove fro

Inhaltszusammenfassung zur Seite Nr. 9

INSTALLATION 9 Installing Heater To Wall (Cont.) 9 INSTALLATION Continued 2. Mark screw locations on wall (see Figure 8). Attaching To Wall Anchor Method Note: Only mark last hole on each end of mounting bracket. For attaching mounting bracket to hollow walls (wall areas between Insert mounting screws through these holes only. studs) or solid walls (concrete or masonry) 3. Remove tape and mounting bracket from wall. 1. Drill holes at marked locations using 5/16" drill bit. For solid walls (concr

Inhaltszusammenfassung zur Seite Nr. 10

INSTALLATION Installing Heater To Wall (Cont.) 10 Mounting Heater To Floor INSTALLATION Continued Installing Bottom Mounting Screws MOUNTING HEATER TO FLOOR 1. Locate two bottom mounting holes. These holes are near bot- Mounting Base Feet to Heater tom on back panel of heater (see Figure 12). 1. Lay heater cabinet on its back on a table with the heater bot- 2. Mark screw locations on wall. tom overhanging the table edge. 3. Remove heater from mounting bracket. 2. Align holes in base foot with mo

Inhaltszusammenfassung zur Seite Nr. 11

INSTALLATION 11 Connecting To Gas Supply 11 INSTALLATION Continued Typical Inlet Pipe Diameters CONNECTING TO GAS SUPPLY VN18(T), VP16(T), VN18IT, and VP16IT - 3/8" or greater VN30(T), VP26(T), VN25IT, and VP22IT - 1/2" or greater WARNING: This appliance requires a 3/8" NPT (National Pipe Thread) inlet connection to the pres- Installation must include equipment shutoff valve, union, and sure regulator. plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be up

Inhaltszusammenfassung zur Seite Nr. 12

INSTALLATION Checking Gas Connections 12 INSTALLATION Continued CHECKING GAS CONNECTIONS Pressure Testing Heater Gas Connections 1. Open equipment shutoff valve (see Figure 16). WARNING: Test all gas piping and connections 2. For natural gas open main gas valve located on or near gas for leaks after installing or servicing. Correct all leaks meter. For propane/LP gas open propane/LP supply tank valve. at once. 3. Make sure control knob of heater is in the OFF position. 4. Check all joints from

Inhaltszusammenfassung zur Seite Nr. 13

OPERATING HEATER (NON-THERMOSTAT MODELS) 13 For Your Safety Read Before Lighting 13 Lighting Instructions OPERATING HEATER 5. Turn control knob to PILOT/IGN and press in. NON-THERMOSTAT MODELS Note: You may be running this heater for the first time after hooking up to gas supply. If so, you may need to press FOR YOUR SAFETY READ in control knob for 30 seconds or more. This will allow air to bleed from the gas system. BEFORE LIGHTING • If control knob does not pop up when released, contact a qual

Inhaltszusammenfassung zur Seite Nr. 14

OFF MED LOW HI PILOT HI MED OPERATING HEATER (NON-THERMOSTAT MODELS) To Select Heating Level 14 To Turn Off Gas To Appliance Manual Lighting Procedure OPERATING HEATER (THERMOSTAT MODELS) For Your Safety Read Before Lighting OPERATING HEATER Continued TO SELECT HEATING LEVEL MANUAL LIGHTING PROCEDURE WARNING: When running heater, set control 1. Remove front panel (see Figure 7, page 8). knob at LOW, MEDIUM, or HIGH locked positions. 2. Follow steps 1 through 5 under Lighting Instructions, page

Inhaltszusammenfassung zur Seite Nr. 15

OFF OFF HI HI HI LO OPERATING HEATER (THERMOSTAT MODELS) 15 Lighting Instructions 15 OPERATING HEATER Continued Ignitor LIGHTING Control Button Knob INSTRUCTIONS 1. STOP! Read the safety information, column 2 page 14. IGNITOR 2. Make sure equipment shutoff valve is fully open. 3. Turn thermostat control knob clockwise Clockwise to the OFF Figure 22 - Control Knob In The OFF Position, Models VP16T, VN18T, VP26T, & VN30T position (see Figure 22 or 23 for your model). 4. Wait five minutes to clear

Inhaltszusammenfassung zur Seite Nr. 16

1 3 2 1 2 1 OPERATING HEATER (THERMOSTAT MODELS) To Select Heating Level 16 To Turn Off Gas To Appliance Thermostat Operation Manual Lighting Procedure OPERATING HEATER Continued TO SELECT TO TURN OFF GAS HEATING LEVEL TO APPLIANCE Shutting Off Heater INFRASTAT MODELS VP16IT, VN18IT, P26IT, 1. Turn thermostat control knob clockwise to the OFF Clockwise & VN30IT ONLY position. 2. Turn off all electric power to the appliance if service is to WARNING: When running heater, set control knob be perf

Inhaltszusammenfassung zur Seite Nr. 17

INSPECTING HEATER 17 Pilot Flame Pattern 17 Burner Flame Pattern CLEANING AND MAINTENANCE ODS/Pilot and Burner Cleaning Burner Pilot Air Inlet Cabinet INSPECTING HEATER CAUTION: You must keep control areas, burner, and circulating air passageways of heater clean. In- Check pilot flame pattern and burner flame pattern often. spect these areas of heater before each use. Have PILOT FLAME PATTERN heater inspected yearly by a qualified service person. Heater may need more frequent cleaning due to ex

Inhaltszusammenfassung zur Seite Nr. 18

SPECIFICATIONS 18 SPECIFICATIONS VN18, VN18T VN18IT VN30, VN30T VN25IT Btu (Variable) 6,600/12,000/18,000 6,600/18,000 6,600/18,000/30,000 7,000/25,500 Type Gas Natural Only Natural Only Natural Only Natural Only Ignition Piezo Piezo Piezo Piezo Pressure Regulator Setting 6" W.C. 6" W.C. 6" W.C. 6" W.C. Inlet Gas Pressure* (in. of water) Maximum 10.5" 10.5" 10.5" 10.5" Minimum 7" 7" 7" 7" Dimensions, Inches (H x W x D) Heater 24.25 x 18.25 x 7 24.25 x 18.25 x 7 24.25 x 25.75 x 7 24.25 x 25.75 x

Inhaltszusammenfassung zur Seite Nr. 19

TROUBLESHOOTING 19 19 TROUBLESHOOTING CAUTION: Never use a wire, WARNING: Turn off and un- needle, or similar object to clean plug heater and let cool before Note: For additional help, visit DESA ODS/pilot. This can damage ODS/ servicing. Only a qualified ser- International’s technical service web site pilot unit. vice person should service and at www.desatech.com. repair heater. Note: All troubleshooting items are listed in order of operation. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY When ignit

Inhaltszusammenfassung zur Seite Nr. 20

TROUBLESHOOTING 20 TROUBLESHOOTING Continued OBSERVED PROBLEM POSSIBLE CAUSE REMEDY ODS/pilot lights but flame goes out when 1. Control knob not fully pressed in 1. Press in control knob fully control knob is released 2. Control knob not pressed in long enough 2. After ODS/pilot lights, keep control knob pressed in 30 seconds 3. Equipment shutoff valve not fully open 3. Fully open equipment shutoff valve 4. Thermocouple connection loose at con- 4. Hand tighten until snug, then tighten 1/4 trol v


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Desa 000 BTU SPC-30R Handbuch Elektrovorwärmer 0
2 Desa 000 Btu/hr Models Handbuch Elektrovorwärmer 0
3 Desa 000-12 Handbuch Elektrovorwärmer 0
4 Desa 100 Handbuch Elektrovorwärmer 0
5 Desa 104504-02 Handbuch Elektrovorwärmer 0
6 Desa 000-15 Handbuch Elektrovorwärmer 0
7 Desa 000-30 Handbuch Elektrovorwärmer 0
8 Desa 050 BTU Handbuch Elektrovorwärmer 0
9 Desa 105801-09 Handbuch Elektrovorwärmer 0
10 Desa 105838-02 Handbuch Elektrovorwärmer 0
11 Desa 10 Handbuch Elektrovorwärmer 0
12 Desa 101811-01C.pdf Handbuch Elektrovorwärmer 0
13 Desa 000-24 Handbuch Elektrovorwärmer 0
14 Desa 104506-02 Handbuch Elektrovorwärmer 0
15 Desa 106040-02 Handbuch Elektrovorwärmer 0
16 A.O. Smith AH - 290 Handbuch Elektrovorwärmer 6
17 A.O. Smith AHD 290 Handbuch Elektrovorwärmer 7
18 A.O. Smith AHDS 290 Handbuch Elektrovorwärmer 0
19 A.O. Smith ST 3000 Handbuch Elektrovorwärmer 5
20 A.O. Smith WATER HEATERS Handbuch Elektrovorwärmer 13