Inhaltszusammenfassung zur Seite Nr. 1
Telescope
Instruction
Manual
78-4501 114mm RefLECtor
Lit. #: 91-0246/06-01
Inhaltszusammenfassung zur Seite Nr. 2
Never Look Directly At The Sun With Your Telescope ❂ Permanent Damage To Your Eyes May Occur 2.
Inhaltszusammenfassung zur Seite Nr. 3
WHERE DO I START? Your Bushnell telescope can bring the wonders of the universe to your eyes. While this manual is intended to assist you in the set-up and basic use of this instrument, it does not cover everything you might like to know about astronomy. It is recommended you obtain a very simple star chart and a flashlight with a red bulb or red cellophane over the end. For objects other than stars and constellations, a basic guide to astronomy is a must. Some recommended sources appear on our
Inhaltszusammenfassung zur Seite Nr. 4
Parts Diagrams 78-4501 114mm Reflector Telescope Parts Diagram 1. Wide Field Finderscope 9. Tripod Leg Lock 2. Cradles 10. Declination Lock Knob 3. Telescope Main Tube 11. Counterweight Shaft 4. Primary Mirror (Internal) 12. Counterweight 5. Latitude Lock Knob 13. Fine Adjustment Cables 6. Tripod Leg 14. Rack and Pinion Focusing Mechanism 7. Accessory Tray Brace 15. Eyepiece 8. Accessory Tray 16. Finderscope Mount 4.
Inhaltszusammenfassung zur Seite Nr. 5
QUICK ASSEMBLY DIAGRAM 78-4501 114mm Reflector Step 5 Step 2 Step 3 Counterweight Step 4 Counterweight Shaft Step 1 1. Spread tripod legs and attach accessory tray. 2. Attach telescope tube to pre-assembled Equatorial Mount with pre-attached tripod legs. 3. Attach Fine Adjustment Knobs. 4. Attach counterweight over counterweight shaft and attach to Equatorial Mount. 5. Attach Finderscope over mounting bolts and replace attachment nuts. PARTS LIST • Adjustable Aluminum Tripod Assembly • W
Inhaltszusammenfassung zur Seite Nr. 6
DETAILED ASSEMBLY Remove all components from the carton and identify all components. READ THROUGH ASSEMBLY INSTRUCTIONS BEFORE YOU ASSEMBLE YOUR TELESCOPE. Attach Accessory Tray and Telescope 1. Fold down the accessory tray braces and place the Accessory Tray on top of braces. Attach Accessory Tray with three small accessory tray bolts and nuts (included). 2. Locate the pre-assembled Tripod and Equatorial Mount. Remove attachment bolts at top of Equatorial Mount. Attach Telescope Main Tub
Inhaltszusammenfassung zur Seite Nr. 7
HOW TO USE YOUR NEW TELESCOPE Selecting an Eyepiece 1. You should always start viewing with the lowest power eyepiece, which in this case is the 20 mm lens. Note: the base power of each eyepiece is determined by the focal length of the telescope objective lens. A formula can be used to determine the power of each eyepiece: telescope OBJECTIVE lens focal length divided by EYEPIECE focal length = MAGNIFICATION (e.g. Using the 20 mm lens, a sample calculation would look like this: 900 mm / 20mm = 4
Inhaltszusammenfassung zur Seite Nr. 8
HOW TO USE YOUR NEW TELESCOPE (CONTINUED) Understanding the Equatorial Mount The Equatorial Mount is designed to move in any direction. It can be set to allow manual controls to track the movements of celestial bodies across the sky. This is referred to as diurnal movement: movement of celestial bodies in the direction opposite to that of the earth’s rotation and around the earth’s axis. By aligning the telescope’s polar axis at celestial North, you will place the telescope parallel with the ea
Inhaltszusammenfassung zur Seite Nr. 9
M ENJOYING YOUR NEW TELESCOPE 1. First determine your targeted object. Any bright object in the night sky is a good starting point. One of the favorite starting points in astronomy is the moon. This is an object sure to please any budding astronomer or experienced veteran. When you have developed proficiency at this level, other objects become good targets. Saturn, Mars, Jupiter, and Venus are good second steps to take. 2. The first thing you need to do after assembling the telescope as plann
Inhaltszusammenfassung zur Seite Nr. 10
M HELPFUL HINTS 1. Your telescope is a very sensitive instrument. For best results and fewer vibrations set your telescope up on a level location on the ground rather than your concrete driveway or your wooden deck. This will provide a more stable foundation for viewing, especially if you’ve drawn a crowd with your new telescope. 2. If possible view from a location that has relatively few lights. This will allow you to see much fainter objects. You’d be surprised how much more you’ll see from
Inhaltszusammenfassung zur Seite Nr. 11
M NOTES 11.
Inhaltszusammenfassung zur Seite Nr. 12
www.bushnell.com
