Bedienungsanleitung Garmin GTX 320

Inhaltszusammenfassung zur Seite Nr. 1

GTX 320
TRANSPONDER
Pilot’s
Guide

Inhaltszusammenfassung zur Seite Nr. 2

Operating The GTX 320 IDENT BUTTON REPLY LIGHT CODE SELECTION KNOBS FUNCTION SELECTION KNOB NOTES The GTX 320 owner accepts all responsibility for obtaining the proper license before using the transponder. The coverage you can expect from the GTX 320 is limited to “line of sight”. Low altitude or aircraft antenna shielding by the aircraft itself may result in reduced range. Range can be improved by climbing to a higher altitude. It may be possible to minimize antenna shielding by locating the

Inhaltszusammenfassung zur Seite Nr. 3

Any time the function switch is in the ON or ALT position the transponder becomes an active part of the beacon system. Select ON or ALT as late as practical prior to takeoff and switch to OFF or SBY as soon as practical after completing landing roll unless the change to SBY has been accomplished previously at the request of ATC. Code Selector The code selector consists of four, eight position switches that provide 4,096 active identification codes. Attention should be paid to the selected ident

Inhaltszusammenfassung zur Seite Nr. 4

® © 1997 GARMIN CORPORATION 1200 E. 151st Street, Olathe, KS USA 66062-3426 Telephone (913) 397-8200 or 1-800-800-1020 FAX (913) 397-8282 http://www.garmin.com GARMIN (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ U.K. Telephone 011-44-1794-519944 FAX 011-44-1794-519222 Part Number 190-00133-00 Rev. A