Inhaltszusammenfassung zur Seite Nr. 1
EN
User manual ............... 2
CN
............... 25
Washing machine
ZWH7120 P
147214520
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety information ..................................... 2 Control panel............................................. 11 Environment concerns............................... 4 Set your washing program......................... 12 Product description................................... 5 International wash code symbols................ 15 Technical data........................................... 5 Programs informations............................... 16 Installation...........................
Inhaltszusammenfassung zur Seite Nr. 3
Installation Garments which have been in contact with volatile petroleum products should not be This appliance is heavy. Care should be machine washed. If volatile cleaning fluids taken when moving it. are used, care should be taken to ensure When unpacking the appliance, check that that the fluid is removed from the garment it is not damaged. If in doubt, do not use it before placing in the machine. and contact the Service Centre. Never pull the power supply cable to remove All packin
Inhaltszusammenfassung zur Seite Nr. 4
Environment concerns With adequate pre-treatment, stains and Packaging materials limited soiling can be removed; the laundry The materials marked with the symbol are can then be washed at a lower temperature. recyclable. Measure out detergent according to the >PE<=polyethylene water hardness, the degree of soiling and the >PS<=polystyrene quantity of laundry being washed. >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection
Inhaltszusammenfassung zur Seite Nr. 5
Product description Front View Back View 1 2 3 8 4 9 5 6 10 12 11 7 13 1 6 11 Detergent Dispenser Drawer Rating Plate Water Drain Hose 2 7 Front Feet 12 Hose Holders Worktop 3 Control Panel 8 Water Inlet Hose 13 Back Feet 4 9 Drain Hose Support Door Opening Handle 5 Drain Filter 10 Mains Cable Technical data Dimensions Width 60 cm Height 85 cm Depth 54 cm Power supply voltage/frequency 220-240 V/50 Hz Total power absorbed 2000 W Minimum fuse protection 10A Minimum 0,05 MPa Water supply pressure
Inhaltszusammenfassung zur Seite Nr. 6
Installation Unpacking Very carefully B remove the front Important! polystyrene block All transit bolts and packing must be (B) by gently 1 removed before using the appliance. pulling the 2 polyethylene bag You are advised to keep all transit devices so (1) downwards that they can be refitted if the machine ever has then (2) out, to be transported again. ensuring not to Using a spanner tear the bag. unscrew and remove the two Some models are provided with a bottom rear bottom cov
Inhaltszusammenfassung zur Seite Nr. 7
Positioning Water drainage The end of the drain hose can be positioned in Install the machine on a flat hard floor. three ways: Make sure that air circulation around the Hooked over the edge of a sink using the machine is not impeded by carpets, rugs etc. plastic hose guide supplied with the Check that the machine does not touch the machine. wall or cupboard units. In this case, make Carefully level by sure the end cannot screwing the come unhooked when adjustable front feet the ma
Inhaltszusammenfassung zur Seite Nr. 8
Electrical Connection Important! This machine is designed to operate on a Connect the machine to an earthed socket. 220-240 V, single-phase, 50 Hz supply. The manufacturer declines any responsibility “An incorrect power supply may void your for damage or injury through failure to comply warranty.” with the above safety precaution. Should the Check that your domestic electrical installation appliance power supply cable need to be can take the maximum load required (2.0 kW), replaced, this
Inhaltszusammenfassung zur Seite Nr. 9
Rust: oxalic acid dissolved in hot water or a Cotton, linen: drum full but not too tightly rust removing product used cold. Be careful packed; with rust stains which are not recent since the Synthetics: drum no more than half full; cellulose structure will already have been Delicate fabrics and woollens: drum no damaged and the fabric tends to hole. more than one third full. Mould stains: treat with bleach, rinse well Washing a maximum load makes the most (whites and fast coloureds only).
Inhaltszusammenfassung zur Seite Nr. 10
Do not spray stain pre-treatment products Compartment : this compartment is (e.g. Vanish) on or near the machine, as it used for washing powder or liquid. can attack plastic materials reducing its life. Compartment : this compartment is used for fabric conditioner and starching agent. Quantity of detergent to be used Aways add laundry detergents before switching The type and quantity of detergent will depend the machine on and keep the dispenser clean on the type of fabric, load
Inhaltszusammenfassung zur Seite Nr. 11
Control panel 1 2 3 4 5 6 7 8 9 1 Program selector dial 6 Extra Rinse Button 2 7 Temperature button Display 3 Spin button 8 Start/Pause button 4 Rinse Hold button 9 Delay Start button 5 Super Quick button 11
Inhaltszusammenfassung zur Seite Nr. 12
Set your washing program Program selector dial Turn the program selector dial to the required program. The green Start/Pause light starts to flash. The selector dial is divided into following sections: (Cancelling/Off) (Rinse) (Drain) (Cottons) (Spin) (Cottons Prewash) (Cottons Economy) (Easy Iron) (Synthetics) (Blanket) (Mixed Fabric) (Mini 30) (Delicates) (Jeans) (Wool/Handwash) The selector dial can be turned either clockwise or anticlockwise. Position “Off” to Reset program/Switching OFF
Inhaltszusammenfassung zur Seite Nr. 13
Press the Spin button repeatedly to change the spin speed, Spin Buttons if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. Rinse Hold By selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. To empty out the water: turn the program selector dial to “Off”. select the Drain or Spin program. reduce the spin speed if needed, by means of the relevant butto
Inhaltszusammenfassung zur Seite Nr. 14
After the program has started, the time remaining is Display (continues) updated every minute. Delayed start The selected delay (20 hours max) set by means of the relevant button appears on the display for about 3 seconds, then the duration of the previously selected program is displayed. The delay time value decreases by one unit every hour and then, when 1 hours remain, the time decreases every minute. Incorrect option selection If an option which is not compatible with the set wash pro
Inhaltszusammenfassung zur Seite Nr. 15
The above options must be selected after choosing the Delay Start Button (continues) wash program with the dial, and before pressing the Start/Pause button. If after having set the delay start option (and pressed Start/Pause button) and you wish the cancel it, follow the below steps: set the washing machine to PAUSE by pressing the Start/Pause button; deselect the Delay start option, changing the status; press the Start/Pause button to start the program. Important! The selected delay can
Inhaltszusammenfassung zur Seite Nr. 16
Altering an option or a running program Opening the door after the program has started It is possible to change any option before the program carries it out. The option “Super Quick” If you need to open the door, you must first cannot be modified after the Start/Pause has set the washing machine to PAUSE by been pressed. pressing the Start/Pause button, after that Changing a running program is possible only you need to wait about 2-3 minutes to by resetting it. Turn the program selector
Inhaltszusammenfassung zur Seite Nr. 17
Programs informations To reset a programme and to switch off the machine turn the selector dial to “Off”. Now, a new programme can be selected. (Cancelling/Off) Cottons Washing programme for white and coloured cottons fabrics. Cottons select this program if you wish your laundry to be prewashed at 30° C Prewash before the main wash. select this program if you wish your laundry to be washed is slightly/ Cottons normally soiled cottons. This program will obtain good washing results Economy whil
Inhaltszusammenfassung zur Seite Nr. 18
Washing programs Type of laundry Program/ Description Options Max. Load Temperature of program - Spin Reduction 7.0 White, coloured cotton Main wash at Cottons - Rinse Hold kg and linen (Normally Cold - 90° C - Delay Start soiled items).: e.g. shirts, Rinses Cold - 90° C - Super Quick underwear, towels. Long spin - Extra Rinse - Spin Reduction White, coloured cotton Main wash at 7.0 - Rinse Hold and linen (Heavy soiled Cold - 90° C kg Prewash - Delay Start items).: e.g. sheets, Rinses - Sup
Inhaltszusammenfassung zur Seite Nr. 19
Type of laundry Max. Program/ Description Options Temperature of program Load For emptying out the Drain of Not available 7.0 Drain kg water left in the drum. water - Spin Reduction 7.0 Separate spin program Drain - Delay Start kg for spin out the water Long spin Spin from clothes. 2.5 Main wash at - Spin Reduction Easy Iron (Maximum 900 rpm) kg Cold - 40° C Cottons and synthetic - Rinse Hold Rinses or mixed fabrics. Cold - 40° C - Delay Start Short spin - Extra Rinse A gentle program Main
Inhaltszusammenfassung zur Seite Nr. 20
use a small brush To run a maintenance wash: to clean the recess. The drum should be empty of laundry. Select the hottest cotton wash program. Use a normal measure of detergent, must be a powder with biological properties. External cleaning Replace the drawer and run the rinse programme without any clothes in the drum. Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the dispenser drawer Cleaning the drain filter The washing powder and a
