Bedienungsanleitung Addonics Technologies DGC11

Inhaltszusammenfassung zur Seite Nr. 1

T E C H N O L O G I E S

LCD Panel
Source tray
Destination tray 1
Destination tray 2
Destination tray 3
Destination tray 4
Destination tray 5
Destination tray 6
Destination tray 7
Destination tray 8
Destination tray 9
Destination tray 10
Destination tray 11


Auxiliary
Power Switch
User Guide
DigiCopier XI
(DGC11)
www.addonics.com
v6.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Ad

Inhaltszusammenfassung zur Seite Nr. 2

There are four buttons and an LCD on the panel of DigiCopier VII. 1 – LCD shows a function or a message. 2 – it is used to scroll up function menus. 3 – it is used to scroll down function menus. 4 – it is used to execute a function. 5 – it is used to cancel a function. II. Connecting the power cable and turning on the DigiCopier VII a. Connect the power cord provided from the wall outlet to the back of the DigiCopier VII. b. A main power switch is located at the back of the towe

Inhaltszusammenfassung zur Seite Nr. 3

Step 3 Populate the destination trays with blank CDs or DVD media. A rewritable DVD containing old data can also be use, but the old data will be automatically erased. Step 4 After the DVD-ROM and DVD writers detect DVDs, press ENT button to start copying. LCD will show the copying information as follows. When copying is in progress, MB and time will decrease while the percentage of completion will increase. “MB” means the size of data that you want to copy.

Inhaltszusammenfassung zur Seite Nr. 4

CONTACT US www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/