Inhaltszusammenfassung zur Seite Nr. 1
HT65/MB165 Mini Bike
Read this manual carefully. It contains important safety information.
No one under the age of 16 should operate this Mini Bike.
OWNER’S MANUAL
Minimum Age Requirement: 16
Rev. B
Always wear a helmet; It could save your Life!
Do not remove this operator’s manual from this vehicle.
Please obtain, review, and follow provincial / municipal government acts and regulations pertaining to owning and operating an off-road vehicle.
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on your purchase of the Baja Motorsports Mini Bike. Your Mini bike is warranted to be free of manufacturing defects in the material of workmanship for a period of 90 days form the date of purchase. During the warranty period BAJA MOTORSPORTS, LLC will at its option, repair, provide replacement parts or replace your Baja Motorsports Mini Bike at no charge. This warranty does not cover normal wear items or damage caused by neglect or misuse of the product. Engine Warranty
Inhaltszusammenfassung zur Seite Nr. 3
! WARNING This manual should be considered as a permanent part of the vehicle and should remain with the vehicle when resold or otherwise transferred to a new user or operator. The manual contains important safety information and instructions which should be read carefully before operating the vehicle. All operators should obtain, review, and follow provincial and municipal government acts and regulations pertaining to owning and operating an off- road vehicle. Children under the age of
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents SAFE OPERATION ............................................................................... 3 SAFETY GEAR ...................................................................................... 4 MODIFICATION OF vEHICLE .......................................................... 4 MAIN DATA ........................................................................................... 5 PARTS & SUBASSEMBLIES .............................................................. 6 OPERATIO
Inhaltszusammenfassung zur Seite Nr. 5
Please read this manual and follow all instructions carefully. To emphasize the special information, the symbol and the words WARNING or CAUTION have some special meanings. Pay great attention to the messages. WARNING Indicates a potential hazard that could result in death or injury. CAUTION Indicates a potential hazard that could result in vehicle damage. NOTE: Indicating special information which is to make maintenance easier or instructions clearer. WARNING and CAUTION are arranged li
Inhaltszusammenfassung zur Seite Nr. 6
SAFE OPERATION Rules for Safe Operation · A pre-operation check must be conducted, before starting the engine, insure safety, prevent mishaps, and damage to components. · It is strongly suggested that all operators take a certified motorcycle rider’s course prior to operating the vehicle. · Full attention is required during driving; paying close attention to the following points to avoid any injury to you by other motorized vehicles: · Do not drive too close to other vehicles. · Never carry a
Inhaltszusammenfassung zur Seite Nr. 7
SAFETY GEAR 1. Never operate this mini bike without wearing a DOT approved motorcycle helmet which fits properly. Operators should also wear eye protection (goggles or face shield), gloves, boots, long-sleeved shirt or jacket, and long pants. 2. Loose clothes are not suitable for motorcycle driving or riding as they may get caught on footrest or wheel, resulting in danger. MODIFICATION OF THE vEHICLE CAUTION Never perform any unauthorized modifications to this vehicle. Only use original r
Inhaltszusammenfassung zur Seite Nr. 8
MAIN DATA Description Data Description Data Overall length 1624mm (64”) Cylinder bore x 6.8cm X 15.41cm stroke (2.68” X 2.13”) Overall width 737mm (29”) PTO shaft rotation Counter clockwise Overall height 914mm (36”) Output, max 6.5hp at 3600 rpm Wheelbase 1162mm Torque, max 9.76 ft-lbs. at 2500 rpm (45.75”) Dead weight 75kg (165 lbs.) Idling speed 1400 +200 -150 Payload 91kg (200 lbs) Displacement of 197cc cylinder Front wheel 19 X 7 - 8 Spark plug MEIYA -F7RTC, NGk- 10psi B
Inhaltszusammenfassung zur Seite Nr. 9
PARTS & SUBASSEMBLIES Rear brake lever Throttle twist grip
Inhaltszusammenfassung zur Seite Nr. 10
Headlight Hand brake Front Shock Absorber Front Wheel Rear Wheel Clutch cover Drive Chain Side Stand Foot pegs Decorative tank Vehicle Identifictaion Number Seat Cushion Air Filter Brake Drum Gas Tank Pull Start Cord EPA Sticker
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION FUEL vALvE Fuel filling The capacity of the fuel tank is 4.2L (.95 gal) . Unscrew the gas cap by turning it counter clockwise and carefully fill the tank with unleaded gasoline through the opening. DO NOT MIX GAS AND OIL TOGETHER, THIS IS A 4-STROkE ENGINE. Replace the gas cap by carefully aligning the threads on the cap and the tank and turning the cap clock wise. Wipe any spilled fuel from the dirt bike using a cloth and dispose of the cloth properly. DO NOT SMOkE OR REFUEL
Inhaltszusammenfassung zur Seite Nr. 12
ENGINE STARTING CAUTION verify oil level prior to starting (see page 11) Starting the engine with low or no oil will damage the engine. WARNING Never start the engine in a closed place as the exhausted gas from the vehicle contains toxic carbon monoxide. 1. Set the ignition switch to “ ” position. 2. Ensure that there is fuel in the tank. 3. Set the fuel valve lever to “ON” position. Choke Lever Closed ON To start a cold engine: OFF ON Fuel valve lever 1. Place the choke lever in the close
Inhaltszusammenfassung zur Seite Nr. 13
SWITCHES ON RIGHT HANDLEBAR Ignition switch The ignition switch is provided on the right handlebar. When the switch is turned to “ ” (off) position, the engine will not start or stops the engine. When the switch is turned to “ ” (on) position, the engine can start and the vehicle can be driven. ON button OFF button 0
Inhaltszusammenfassung zur Seite Nr. 14
CHECk-UPS, ADJUSTMENT AND MAINTENANCE Checking the Oil Check the engine oil each time prior to operating the mini bike. The oil level should be between the upper and lower lines of the oil gauge. 1. Set the Mini Bike on level ground, screw off the oil gage plug, wipe the oil gage rod clean and then insert the gage plug into the crankcase again to check the oil level. There is no need to screw the oil gage plug into its hole in the crankcase. 2. Add lubricating oil up to the edge of the fuel p
Inhaltszusammenfassung zur Seite Nr. 15
* CHANGING THE OIL 1. Remove the “Screw Plug” located at the bottom of the engine and let the oil drain into an approved collection container. DO NOT PERFORM THIS PROCEDURE WHILE THE ENGINE IS HOT. SERIOUS BURNS COULD RESULT FROM CONTACT WITH HOT OIL. 2. Dispose of the used oil properly. For proper disposal procedures, contact your local oil recycling center. 3. Clean and replace the “Screw Plug” tighly. 4. Refill the engine with the proper amount of oil and recheck the amount of oil
Inhaltszusammenfassung zur Seite Nr. 16
CHECkING & CLEANING THE AIR FILTER 1. Remove seat to access air filter. Seat is removed by removing nut located under seat (see photo). 2. Locate Air Filter Box under seat and remove cover. Seat nut 3. Remove air filter. 4. Remove foam cover from Air filter element. 5. Tap the Air filter element gently to remove most of the dust and dirt. Blow out remaining dust with compressed air. If the element is damaged, replace it. 6. Wash the foam element cover per instructions below
Inhaltszusammenfassung zur Seite Nr. 17
ADJUSTING THE THROTTLE CABLE Make sure the throttle cable is adjusted properly. To adjust throttle cable, rotate adjustment nut located at the hand throttle. Check if the throttle twist grip has the required free operating movement. The required free operating movement: 2-6mm (.078 -.24in) . If the grip cannot be moved freely, turn the adjusting nut to ensure proper operating movement. After adjustment, start the engine and check for the operating movement again. Repeat the adjustmen
Inhaltszusammenfassung zur Seite Nr. 18
ADJUSTMENT OF REAR BRAkE 5-7mm free play 1. The front brake hand grip should have free operating (.-. in) movement of 5-7mm (.2-.3in) . 2. To make adjustment, turn rear adjusting nut clockwise to reduce and counterclockwise to increase the free operating movement of the hand brake. 3. Brake shoes should be replaced by a qualified service technition once brake shoes are worn . Rear brake arm Brake cable Rear brake adjusting nut
Inhaltszusammenfassung zur Seite Nr. 19
ADJUSTMENT OF CHAIN 1. When chain adjustment is needed, loosen rear axle bolt . 2. Turn the chain adjusting nuts on the left and right sides to adjust the tension of the chain and to align the marking of the chain adjuster with the engraved lines in the similar position on both sides. 3. Tighten rear axle bolt by a torque of 50-60Nm (37-44 ft.lb.). 4. Repetitively check the tension of the chain. Rear axle bolt 15-20mm 1/2” - 3/4” Chain adjusting nut Both Sides GREASING PROCEDURES TO THE
Inhaltszusammenfassung zur Seite Nr. 20
vEHICLE WASHING Cleaning the vehicle regularly can slow down the color fading of its body and make it easier to check if there is any damage and any oil leakage. CAUTION Washing the Mini Bike with over-pressurized water may cause damage to some of its components. Therefore, do use a pressure washer to clean the vehicle. The following parts should be cleaned using low pressure water: — Wheel hub — Exhaust pipe — Fuel tank and lower portion of cushion — Carburetor — Head lock and ignition swi
