Inhaltszusammenfassung zur Seite Nr. 1
Full Weather Station with Radio Controlled
Clock and AM / FM Radio
(Model #: PS-M03 / PS-M03U)
User Manual
PS M03 English Cover 1 6/30/03, 11:11 PM
Inhaltszusammenfassung zur Seite Nr. 2
Backlight ................................................................. 19 TABLE OF CONTENTS Reset system ........................................................... 20 About this guide ......................................................... 2 Safety and care ....................................................... 20 Product overview ........................................................ 3 Warnings ................................................................. 20 Getting started .....
Inhaltszusammenfassung zur Seite Nr. 3
ABOUT THIS GUIDE In this box, you will find: Congratulations on your selection of the Philippe Starck • Main unit with Oregon Scientific Full Weather Station with Radio • Remote unit Controlled Clock and AM / FM Radio (PS-M03 / • Batteries PS-M03U). • AC power adapter This powerful device bundles time keeping, alarm, indoor and wireless outdoor temperature and humidity monitoring, weather forecasting, and digital-tuned AM/ FM radio into a single tool you can use from the convenience of your home
Inhaltszusammenfassung zur Seite Nr. 4
PRODUCT OVERVIEW DESCRIPTIONS 1. Snooze / Light button ( 12, 19) TOP AND BATTERY COMPARTMENT VIEW 2. Light sensor ( 19) 1 2 3 PS M03 English R18 3 7/16/03, 1:04 PM EN
Inhaltszusammenfassung zur Seite Nr. 5
BOTTOM AND SIDE VIEW DESCRIPTIONS 1. Battery compartment ( 8) LIGHT 2. Backlight switch ( 19) SENSOR RESET 3. Reset button ( 8, 20) LIGHT ON OFF AUTO 4. Light sensitivity knob ( 19) 5. Headphone jack ( 18) 6. DC input jack ( 8) 2 3 4 1 7. Antenna ( 17) 5 NOTE AC power adapter not shown. DC 7.5V 6 7 4 PS M03 English R18 4 7/16/03, 1:04 PM EN
Inhaltszusammenfassung zur Seite Nr. 6
LCD DISPLAY DESCRIPTIONS 1. Low battery icon ( 8) 1 2. Clock ( 10) 3. Barometer ( 13) 4. Weather forecast ( 14) 5. Moon phase ( 13) 2 6. Calendar ( 12) 7. Temperature and humidity ( 15) 3 7 8. Alarm ( 11) 9. Radio ( 17) 4 8 5 9 6 5 PS M03 English R18 5 7/16/03, 1:04 PM EN
Inhaltszusammenfassung zur Seite Nr. 7
BACK VIEW BUTTON DESCRIPTIONS 1. Select - switch modes / change settings ( 8, 9) 2. Up - increase setting / activate auto-synch 1 6 ( 10) 3. Down - decrease setting / deactivate auto-synch 7 ( 10) 4. Alarm -activate / deactivate alarm ( 12) 8 2 9 5. Channel - switch remote unit ( 15) 3 6. Radio - turn radio or radio alarm on/off ( 12, 17) 7. Station -select a preset station ( 18) 8. Tuning - select AM/FM band ( 18) 9. Sleep - activate Sleep Timer ( 18) 4 5 6 PS M03 Engli
Inhaltszusammenfassung zur Seite Nr. 8
REMOTE UNIT DESCRIPTIONS 1 1. Temperature / Trend display ( 15, 17) 4 2. Low battery icon ( 8) 2 5 3. Humidity / Trend / Comfort Level display 6 ( 15, 16, 17) 4. °C/°F switch ( 9) 7 5. Channel switch ( 9) 3 6. Reset button ( 8, 20) 7. Battery compartment ( 8) 8. Wall mount hole 8 9. Battery compartment lid 9 7 PS M03 English R18 7 7/16/03, 1:04 PM EN
Inhaltszusammenfassung zur Seite Nr. 9
AC POWER ADAPTER GETTING STARTED An AC power adapter is supplied for use with the main unit. You must connect the power adapter if you wish to BATTERIES use the continuous backlight feature. It is also Batteries for the remote and main units are supplied recommended for use with the Radio. The jack is with this product. Replace them whenever the low located on the side of the unit. battery signal ( ) displays. Remove the battery compartment lid on the bottom of the main unit, and NOTE If the A
Inhaltszusammenfassung zur Seite Nr. 10
CHANGE SETTINGS INSTALLATION Press and hold SELECT for 2 seconds. Then, press Mount the remote unit on a flat surface using the recess UP or DOWN to change each setting. Press SELECT hole on the back of the unit. to switch options. For best results: • Before you insert the batteries, select the measurement unit and channel number first. REMOTE UNIT SET UP • Place the unit out of direct sunlight and moisture. Up to 3 remote units can be used with this product to • Do not place the remote unit mor
Inhaltszusammenfassung zur Seite Nr. 11
CLOCK NOTE For best results, place the unit away from metal This product can automatically synchronize the date and or electrical objects, and near a window with a clear time with official time-keeping organizations in Frankfurt, view to the sky. Germany (PS-M03) or Rugby, England (PS-M03U). TO DISABLE OR ENABLE AUTO- When the unit is within 1500 km (932 miles) of a RF SYNCHRONIZATION signal, the reception icon will blink during reception. In Clock mode, press DOWN for 2 seconds to disable the a
Inhaltszusammenfassung zur Seite Nr. 12
SET OR CHANGE THE CLOCK The Radio alarm turns on the Radio automatically. It will 1. Press SELECT to switch to the Clock Mode. turn off after 2 hours. The time will flash. 2. Press and hold SELECT for 2 seconds to enter SET ALARM the setting mode. 1. Press SELECT several times until the Alarm 3. Select the 12/24-hour format, hour, and minute. area flashes. Press UP or DOWN to change the setting. 2. Press and hold SELECT for 2 seconds to enter Press SELECT to confirm. the setting mode. 3. Sel
Inhaltszusammenfassung zur Seite Nr. 13
If you choose , use the radio control buttons CALENDAR to select the AM/FM band, radio station and volume level ( 18). SET DATE 4. Press SELECT again when you are finished. Clock auto-synchronization must be deactivated before you manually set the date. ( 10) SNOOZE Press the SNOOZE/LIGHT button the top of the unit 1. Press SELECT several times until the calendar to temporarily disable the alarm for 8 minutes. The area flashes. alarm icon will blink while Snooze is activated. 2. Press
Inhaltszusammenfassung zur Seite Nr. 14
MOON PHASE Trend Description Pressure change Press SELECT until the Calendar Area flashes. Then, (mb/hPa) press UP or DOWN to change the date and view the 1 hr 6 hrs corresponding moon phase. Rising +1 +3 BAROMETER This product tracks barometric pressure changes over Steady Steady Steady the past 24 hours to provide the weather forecast ( 14) and a trend line showing the direction of Falling -1 -3 barometric change. Barometric changes are measured by the main (indoor) unit. BAROMETRIC TREND T
Inhaltszusammenfassung zur Seite Nr. 15
VIEW THE LAST 24 HOURS WEATHER FORECAST Press SELECT 2 times until the Barometer Area This product forecasts the next 12 to 24 hours of flashes. Then, press UP or DOWN to view the last weather within a 30 to 50 km (19 - 31 mile) radius with 24 hours history. 70 to 75 percent accuracy. The weather forecast is always displayed. SET UNIT AND ALTITUDE Clear Cloudy Rainy Partly Cloudy You can set the unit of measurement (mb/hPa or inHg) and altitude. Setting the altitude allows the product to take mo
Inhaltszusammenfassung zur Seite Nr. 16
CLEAR MIN / MAX RECORDS TEMPERATURE AND HUMIDITY While viewing Min/Max records, press and hold UP or With the press of a button, you can check the current DOWN for 2 seconds until a beep sounds. This clears indoor or outdoor temperature, humidity percentage, the previous measurements from the memory. comfort level, trend, and record measurements. Outdoor measurements are collected by the remote SELECT REMOTE UNIT CHANNEL unit. While in the Temperature / Humidity Mode, press CHANNEL to switch bet
Inhaltszusammenfassung zur Seite Nr. 17
SENSOR SEARCHING COMFORT ZONE If there is no remote unit signal, the temperature and The indoor and outdoor comfort zones are shown for humidity measurements will be blank. Check the remote the following conditions. unit batteries, or press and hold UP and DOWN for Zone Temperature RelativeHumidity 2 seconds to search for the remote unit(s). Any >70% Searching No sensor Sensor found Wet Any <40% NOTE Signals from household electrical appliances Dry such as doorbells and home security systems
Inhaltszusammenfassung zur Seite Nr. 18
TRENDS SET UNIT The trend arrow for the last 30 minutes always displays. While in Temperature / Humidity Mode, press SELECT Indoor and outdoor temperature and humidity trends are for 2 seconds. Press UP or DOWN to switch between shown separately. °C and °F. Press SELECT to confirm. Trend Relative Humidity Temperature RADIO +0.5 °C +3% You can listen to Phase Lock Loop (PLL) digital radio broadcasts with this product. Steady Steady ANTENNA The antenna wire is located on the side of the unit. -0.5
Inhaltszusammenfassung zur Seite Nr. 19
STORE STATION TO MEMORY VOLUME Press STATION for 2 seconds. The assigned number Press UP or DOWN. There are 8 volume levels. (1 - 8) will show in the Radio Area. SWITCH AM/FM BAND Press TUNING to enable auto tuning. Press again to SLEEP TIMER switch AM/FM band. Press SLEEP. To change the timer length (0 - 120 minutes in increments of 10) press UP or SELECT STATION DOWN. The radio automatically turns off when the Press STATION. There are 16 preset channels: timer reaches 0. To manually turn off t
Inhaltszusammenfassung zur Seite Nr. 20
E 3. The Light sensitivity knob is located in the BACKLIGHT battery compartment. Rotate to adjust. Press SNOOZE/LIGHT to illuminate the backlight for 4. When activated, the continuous backlight will be 5 seconds. half as bright as usual. To achieve full brightness, press SNOOZE/LIGHT. CONTINUOUS BACKLIGHT The AC power adapter must be plugged in to use this feature ( 8). 1. The BACKLIGHT switch is located in the battery LIGHT SENSOR LIGHT ON OFF AUTO compartment. Move it to the “ON” positi
