Bedienungsanleitung Bolens 190-751-OEM

Inhaltszusammenfassung zur Seite Nr. 1

OPERATOR’S MANUAL
TRACTOR SNOW CAB
Model Number
190-751-OEM
.
IMPORTANT: READ SAFETY RULES AND INSTRUCTION CAREFULLY
MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722
PRINTED IN U.S.A. FORM NO. 48898 (7/03)

Inhaltszusammenfassung zur Seite Nr. 2

RULES FOR SAFE OPERATION Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. 1. This cab provides foul weather protection only. It 4. The snow cab will restrict your field of vision in does not provide protection against exhaust fumes, some directions. Use extra caution when operating collision, rollover or other accidents. your tractor with the snow cab attached. 2

Inhaltszusammenfassung zur Seite Nr. 3

SHOWN FULL SIZE AB C D E FG H I JK NOT SHOWN FULL SIZE LM N REF. QTY. DESCRIPTION REF. QTY. DESCRIPTION A 1 Hex Bolt, 5/8” x 1-3/4” H 4 Hex Lock Nut, 1/4” B 2 Carriage Bolt, 5/16 x 2" I 8 Hex Nut, 5/16” C 4 Hex Bolt, 1/4 x 1-1/2" J 1 Hex Nut, 5/8” D 8 Hex Bolt, 5/16” x 1” K 2 Jam Nut, 1/2” E 2 Shoulder Bolt L 4 Spiral Hook F 8 Lock Washer, 5/16” M 2 Footrest Clamp G 2 Flat Washer, 5/16” N 2 Plastic Knob 3

Inhaltszusammenfassung zur Seite Nr. 4

TOOLS REQUIRED FOR ASSEMBLY ASSEMBLING THE BASE 7. Assemble the drawbar bracket to the base (2) 7/16" Wrenches assembly using four 5/16” x 1” hex bolts, 5/16” (2) 1/2” Wrenches lockwashers and 5/16” hex nuts. See figure 3. (1) 3/4” Wrench 8. Attach the tool bracket to the base assembly (2) 15/16” Wrenches using four 5/16” x 1” hex bolts, 5/16” lockwashers and 5/16” hex nuts. See figure 3. REMOVAL OF PARTS FROM TRACTOR 1. Remove any rear mounted attachments which TOOL BRACKET may be installed o

Inhaltszusammenfassung zur Seite Nr. 5

STANDARD FRAME TRACTORS 1/4" x 1-1/2" SUPPORT ROD 10. Hook the base assembly under the shoulder bolts in HEX BOLT the adapter brackets using the second notch in the base assembly. Align the hole in the bottom of the base assembly with the hole in the tractor drawbar. Insert the 5/8” x 1-3/4” hex bolt and secure it with the 5/8” hex nut. See figure 5. 1/4" HEX LOCK NUT 1/4" HEX LOCK NUT 1/4" x 1-1/2" HEX BOLT FIGURE 7 5/8" x 1-3/4" HEX BOLT SHOULDER BOLT 15. Install a footrest clamp with preasse

Inhaltszusammenfassung zur Seite Nr. 6

17. Assemble two spiral hooks into holes on top of u-tube OPERATING THE SNOW CAB at front of tubing frame. See figure 9. 18. Insert ends of rope down through spiral hooks Read this owner's manual and safety rules before attached to u-tube and then insert ends through two operating your tractor with the Snow Cab. grommets in front of canopy. See figure 9. CAUTION: Watch out for low tree limbs and other overhead objects which may interfere with the snow cab. SPIRAL SPIRAL HOOKS HOOKS CAUTION: T

Inhaltszusammenfassung zur Seite Nr. 7

REPAIR PARTS FOR MODEL 190-751-OEM TRACTOR SNOW CAB 5 3 3 4 16 12 17 17 11 2 6 2 10 9 8 1 15 25 13 24 14 19 20 17 22 18 21 26 17 20 19 21 18 26 23 7 REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION NO. NO. NO. NO. 15 25140 1 Tool Bracket 1 64717 1 Base Assembly 16 49017 1 Rope 2 25014 2 Upright Tube 17 49016 4 Spiral Hook 3 25013 2 Top Tube 18 64802 2 Footrest Clamp 4 25012 1 U-Tube 19 43083 8 Hex, Nut 5/16-18 5 25015 3 Support Rod 20 43086 8 Lock Washer, 5/16” 6 48895 1 Vinyl Canopy 21 43

Inhaltszusammenfassung zur Seite Nr. 8

If you are having difficulty assembling this product or if you have any question regarding the controls, operation or maintenance of this unit, please call the Customer Support Department. You can reach them by calling: 1-800-800-7310