Inhaltszusammenfassung zur Seite Nr. 1
50” & 60” Snowblower
TABLE OF CONTENTS
DESCRIPTION PAGE
Warranty......................................................................1
Safety Instructions & Safety Sign Locations ................ 2
Operating Instructions.................................................. 3
Assembly Instructions.................................................. 5
50” & 60” Allied Snowblower Drawings..........
Inhaltszusammenfassung zur Seite Nr. 2
50” & 60” Allied Snowblower WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange, at B
Inhaltszusammenfassung zur Seite Nr. 3
50” & 60” Allied Snowblower ALLIED SNOWBLOWER This manual is for both 50" and 60" snowblowers. When ordering parts, specify model number and serial number. Both snowblowers are the push type and will mount to a tractor with a category 1 three-point hitch or a category 1 Quick Hitch and 540 rpm PTO. Both snowblowers come with a hand crank chute control as standard. A hydraulic control is available as an option a
Inhaltszusammenfassung zur Seite Nr. 4
50” & 60” Allied Snowblower OPERATING INSTRUCTIONS 1. Do not operate the blower in the fully raised position. The three-point hitch on some tractors raises high enough to cause the PTO shaft to bind. This can cause damage to the PTO shaft and/or to the hitch and pins. NOTE: PTO shaft angle should not exceed 20 ° for optimum performance and life. Damage may occur to PTO and/or snowblower if angle becomes mor
Inhaltszusammenfassung zur Seite Nr. 5
50” & 60” Allied Snowblower OPERATING INSTRUCTIONS – cont’d. 11. CAUTION: Always check to see that both ends of the PTO shaft are securely attached as per instructions every time you are preparing to use the snowblower. 12 When replacing bearings or tightening a loose bearing collar, always tighten collar in the direction of shaft rotation using a center punch or a similar tool. 13. Shear Spr
Inhaltszusammenfassung zur Seite Nr. 6
50” & 60” Allied Snowblower 50" & 60" SNOWBLOWER ASSEMBLY INSTRUCTIONS 1. Mount the discharge spout (#2) using the spout clamp (#3) bolted to the spout ring on the snowblower. Lubricate the spout ring and clamp. NOTE: A hydraulic cylinder and hose kit to control the spout deflector is available as an option. 2. Hitch Assembly: With right and left hitch tubes (#5 & #6) turned as shown in drawing, slide th
Inhaltszusammenfassung zur Seite Nr. 7
50” & 60” Allied Snowblower ASSEMBLY INSTRUCTIONS – cont’d. 4. Hydraulic Control Assembly: (option) a) Bolt the hydraulic swivel assembly (#21) to the back of the fan housing on the left side using ½” x 1 ¼” hex bolts, lock washers and hex nuts. b) Bolt the cylinder mounting bracket (#23) to the back of the fan housing on the right side using the same size hex bolts. c) Turn the spout forward and the
Inhaltszusammenfassung zur Seite Nr. 8
50” & 60” Allied Snowblower - 7 -
Inhaltszusammenfassung zur Seite Nr. 9
50” & 60” Allied Snowblower - 8 -
Inhaltszusammenfassung zur Seite Nr. 10
50” & 60” Allied Snowblower WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 50'' & 60'' SNOWBLOWERS ITEM PART # DESCRIPTION 1 905595A Main Body (50'') 905596A Main Body (60'') 2 965645 Disch
Inhaltszusammenfassung zur Seite Nr. 11
50” & 60” Allied Snowblower 34 87553 1/2'' x 1 3/4'' Hex Bolt (pl) 35 81549 5/16'' x 3/4'' Hex Bolt (pl) 36 81569 5/16'' Lock Washer (pl) 37 81568 5/16'' Hex Nut (pl) 38 965630 Fan (50'') (Standard 3-Blade) 965445 Fan (50'') (4-Blade) 965642 Fan (60'') (Standard 3-Blade) 907118 Fan (60'') (4-Blade) 39 965505 Auger (50'') 965610 Auger (60'') 40 965637 40 Tooth Sprocket - 50'' & 60'' 41 965631 Roller Chai
Inhaltszusammenfassung zur Seite Nr. 12
50” & 60” Allied Snowblower 74 961012 #16 Hair Pin Clip 75 961876 1/2'' x 1 1/2'' Clevis Pin (pl) 76 901435 1/2'' X 2 1/2'' Clevis Pin (pl) 77 902477 Skid Plate Weldt 78 812026 5/16'' X 1'' Hex Bolt (pl) 79 9812426 1/4'' x 1 3/4'' Spring Pin (pl) 80 936402 PTO Safety Chain 81 9812487 Narrow Rim Washer 1 1/4'' x 10ga (pl) 82 967110 Narrow Rim Washer 1 1/4'' x 14ga (pl) 83 9812439 Narrow Rim Washer 1 1/4'' x 18
Inhaltszusammenfassung zur Seite Nr. 13
50” & 60” Allied Snowblower 50” & 60” ALLIED SNOWBLOWER PTO SHAFT - 12 -
Inhaltszusammenfassung zur Seite Nr. 14
50” & 60” Allied Snowblower 50'' Allied Snowblower PTO Parts List Item # Part # Description F512 Shaft Complete 936379 Tractor Half of PTO (shear) 936380 Implement Half of PTO (clamp yoke) 1 936247 Shear Assembly 2 936168 Spring – Lock Kit (Collar, Spring, Ret. Ring, 2-3/8'' Balls) 3 936248 Shear Kit (3/8" x 1/2" Bolt, Blank, 24-1/4" Balls 4 Shear Bolt 3/8" x 1" (grade 8) - 1 required 5 812363 3/8"
Inhaltszusammenfassung zur Seite Nr. 15
50” & 60” Allied Snowblower 1.75 X 5 CYLINDER ASSEMBLY Item # Part # Description 24930 Cyl Complete 1 115367 Tube Weldt 2 112104 Shaft Weldt 1.0 Dia 3 X2669 Seal Kit - 14 -
Inhaltszusammenfassung zur Seite Nr. 16
50” & 60” Allied Snowblower 50” & 60” ALLIED SNOWBLOWER BUNDLES QUANTITY BUNDLE NO. DESCRIPTION 50” Snowblower w/hand crank, 3-blade fan – YC5010 1 F0432 Body Assembly 50” Snowblower w/hand crank, 4-blade fan – YC5010-4 1 F0433 Body Assembly 60” Snowblower w/hand crank, 3-blade fan – YC6010 1 F0436 Body Assembly 60” Snowblower w/hand crank, 4-blade fan – YC6010-4 1 F0437 Body Asse
