Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Deli Shop Model 436 Setup Guide SPECIFICATIONS ..................................................................................................................................1 INTERNAL PARTS LOCATION ..........................................................................................................2 INTERNAL PARTS LOCATION (CONTINUED) ..............................................................................3 INITIAL SET UP ..........................................................
Inhaltszusammenfassung zur Seite Nr. 4
Deli Shop Model 436 Setup Guide Notes . . . ii 4360001
Inhaltszusammenfassung zur Seite Nr. 5
Deli Shop Model 436 Setup Guide SPECIFICATIONS DIMENSIONS: Height - 183 cm (72 in.) Width - 73.6 cm (29 in.) 3 Depth - 88.3 cm (34 /4 in.) WEIGHT: 266.3 kg (587 lbs.) ELECTRICAL (U.S.): 115 Volts AC, 60 Hertz, 12 Amps, Single Phase (INTERNATIONAL): 230 Volts AC, 50 Hertz, 6 Amps, Single Phase REFRIGERATION: Refrigerant - 134a Charge - 213 g (7.5 oz.) MISCELLANEOUS: Minimum ambient temperature 5° C (41° F) Maximum ambient temperature 32° C (90° F) FOR INDOOR USE ONLY SPECIAL OPERATING N
Inhaltszusammenfassung zur Seite Nr. 6
Deli Shop Model 436 Setup Guide INTERNAL PARTS LOCATION 2 4360001
Inhaltszusammenfassung zur Seite Nr. 7
Deli Shop Model 436 Setup Guide INTERNAL PARTS LOCATION (CONTINUED) 4360001 3
Inhaltszusammenfassung zur Seite Nr. 8
Deli Shop Model 436 Setup Guide INITIAL SET UP Unpack and Inspect 1. Carefully remove the merchandiser from its shipping carton and place it on a level surface. 2. Inspect the outside of the merchandiser for dents, scratches, or any damage resulting from improper handling. 3. If the merchandiser has the optional door lock, the key will be in the coin return receptacle. 4. Inspect the inside of the cabinet. Observe the location and position of the packing material should you need to reuse it.
Inhaltszusammenfassung zur Seite Nr. 9
Deli Shop Model 436 Setup Guide INSTALLATION NOTE This merchandiser is intended for INDOOR use only. CAUTION Make sure the merchandiser is properly leveled on a flat, solid, stable floor or base foundation. IF THIS IS NOT DONE, PERSONAL INJURY AND/OR DAMAGE TO EQUIPMENT MAY RESULT! 1. Move the merchandiser to the desired location. 2. Position the merchandiser at least 6 inches (15 cm) from any wall. 3. Using a spirit level, level the machine front to back and side to side. NOTE You may need t
Inhaltszusammenfassung zur Seite Nr. 10
Deli Shop Model 436 Setup Guide INSTALL THE COIN MECHANISM CAUTION Make sure the main power switch is turned OFF before you work on the merchandiser. Failure to do so could result in damage to electronic components. 1. Turn OFF the main power switch. Refer to the instructions provided with the coin mechanism and remove the coin validator assembly. 2. Loosen the coin mechanism mounting screws on the merchandiser so they stand off about 1/8" (0.3 cm). 3. Position the coin mechanism so the thr
Inhaltszusammenfassung zur Seite Nr. 11
Deli Shop Model 436 Setup Guide INSTALL LABELS 4360001 7
Inhaltszusammenfassung zur Seite Nr. 12
Deli Shop Model 436 Setup Guide INSTALL THE DOOR LOCK There are two optional door locks: LOCK FLEX-ACE (P/N 9992000) SPRING a. Corresponding key b. (P/N 9994000) VAN LOCK (P/N 3112163) SQUARE a. Coresponding key HOLE b. (P/N 3112164) c. Lock and key kit (P/N 3122165) KEY Install the door lock as follows: LOCK CYLINDER 1. Remove the lock spring. 2. Depress the lock pin and push the lock cylinder in the lever until the pin snaps into place. LEVER 3. Test the lock mechanism with the key. 8 436000
Inhaltszusammenfassung zur Seite Nr. 13
Deli Shop Model 436 Setup Guide LOAD THE MERCHANDISER 1. Adjust the product dividers, if necessary (page 23). 2. Set new prices, if desired. NOTE If the food carousel is loaded with items which are too large for the compartments, the car- ousel will not rotate properly. 3. Load any empty compartments. 4. Push in the load switch until the SWITCH carousel rotates enough to expose more empty compartments. 5. Repeat steps 3 and 4 until the carousel is fully loaded. VEND DOO 6. Close the door.
Inhaltszusammenfassung zur Seite Nr. 14
Deli Shop Model 436 Setup Guide PROGRAMMING Getting Around Getting around the Deli Shop software is pretty easy once you know the features that are available to you, and how to use them. The three main parts you will use are the SELECTION SWITCH PANEL, the DISPLAY, and the MODE switch. The Selection Switch Panel The selection switch panel is located on the monetary panel. These are the keys customers use to make selections, but you will use these keys during programming procedures. Special
Inhaltszusammenfassung zur Seite Nr. 15
Deli Shop Model 436 Setup Guide The Displays The display group consists of a 4-character digital display which per- forms two functions, and is referred to in this book as "the display": ES USE EXACT CHANGE 1. It shows the customer's selection and how much credit is in the SELECTION PRICE machine, as well as the standby message. 2. It provides information and feedback to the service person during 427P0011 maintenance. Standby Messages Several standard messages (called “standby messages”) are d
Inhaltszusammenfassung zur Seite Nr. 16
c c c c c c 25 25 5 10 10 25 25 5 10 10 Deli Shop Model 436 Setup Guide The display group also contains two lamps which light up under certain conditions: 1. The "USE EXACT CHANGE" lamp lights when there are insufficient coins in the merchandiser to provide change for a vend. You can set the criteria for this condition in the programming section. 2. The "SELECTION PRICE" lamp lights when the customer has inserted insufficient credit into the machine to vend the selected product. In conjuncti
Inhaltszusammenfassung zur Seite Nr. 17
Deli Shop Model 436 Setup Guide DATA View several types of sales data: NOTE All data is not resettable. 1. Press the MODE switch on the main controller. 2. Press until the display shows . The display will flash the total cash sales: . . . XXXX . . . XX.XX 3. If you have the DEX option, press to transfer data into your DEX device. 4. Press . The display shows - -, then flashes 4 to 8 digits. This is the dollar and cents amount of door 1 sales. 5. Press to view cash sales for doors 2 th
Inhaltszusammenfassung zur Seite Nr. 18
Deli Shop Model 436 Setup Guide PRICE Set prices for all the selections in your merchandiser: 4 5 9 The price display: 0 C --... changes to ... . D F Door number Selection price 1. Press the MODE switch on the main controller. 427P0014 2. Press until the display shows . 3. Press , and the display shows - - , then .XX. "XX" is the price for door number 1. 4. Press until the selection you want to price is displayed. 5. Enter a new price with the number keys. 6. Repeat steps 4 and 5 until you
Inhaltszusammenfassung zur Seite Nr. 19
Deli Shop Model 436 Setup Guide Faults Display all the active faults on your merchandiser: 1. Press the MODE switch on the main controller. 2. Press until the display shows . Note: If no faults are present, this will not be displayed. 3. If errors are present, press to see the list of faults: The EPROM is bad. RAM is not initialized or is not compatible with the currently loaded software. If this message appears, initialize your RAM by performing the following procedure: NOTE: Initial
Inhaltszusammenfassung zur Seite Nr. 20
Deli Shop Model 436 Setup Guide Configure Configure various machine functions: 1. Press the MODE switch on the main controller. 4 5 9 2. Press until the display shows . 0 3. Press . The display shows the coin mechanism options: C . = dumb mech D F . = MDB . = Exec mech . = No mech 427P0014 Press to switch between the coin mech choices. 4. Press . The display shows the bill validator options: . = Pulse validator (not supported at this time) .. . = MDB validator. Press 1, 2, or 5 to enab
