Inhaltszusammenfassung zur Seite Nr. 1
CP100
CP100
Commercial Series
Two-Way Radio User Guide
Inhaltszusammenfassung zur Seite Nr. 2
safety.fm Page iii Friday, February 21, 2003 12:31 PM
Inhaltszusammenfassung zur Seite Nr. 3
XTNTOC.fm Page 1 Monday, March 3, 2003 1:29 PM Talking and Receiving............... 15 Table of Contents Signal Strength Indicator/ Product Safety and RF Exposure Channel Busy........................ 15 Compliance...............................i Talk Range............................... 15 Introduction...................................1 Keypad Lock............................. 16 FCC Licensing Information..........3 Hands-Free Use/VOX .............. 16 Getting Started.......................
Inhaltszusammenfassung zur Seite Nr. 4
XTNTOC.fm Page 2 Monday, March 3, 2003 1:29 PM Programming the Available Channel (15 Ch Models Only)............. 24 Programming Call Tones ........ 24 Programming Microphone Gain ...................................... 25 Editing the Scan List (15 Ch Models Only)............. 26 Cloning..................................... 26 Advanced Features ................... 28 Troubleshooting ....................... 30 Use and Care.............................. 33 Frequencies and Bandwidths... 34 Verif
Inhaltszusammenfassung zur Seite Nr. 5
safety.fm Page i Friday, February 21, 2003 12:21 PM Product Safety and RF Exposure Compliance Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet ! enclosed with your radio. C a u t i o n ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety a
Inhaltszusammenfassung zur Seite Nr. 6
safety.fm Page ii Friday, February 21, 2003 12:21 PM ii Product Safety and RF Exposure Compliance
Inhaltszusammenfassung zur Seite Nr. 7
intro.fm Page 1 Friday, February 21, 2003 12:17 PM Introduction Thank you for purchasing a Motorola CP100 Radio. Your radio is a product of Motorola’s 70 plus years of experience as a world leader in the designing and manufacturing of communications equipment. The CP100 radios provide cost- effective communications for businesses such as retail stores, restaurants, schools, construction sites, manufacturing, property and hotel management and more. Motorola two-way radios are
Inhaltszusammenfassung zur Seite Nr. 8
intro.fm Page 2 Friday, February 21, 2003 12:17 PM For a copy of a large-print version of this guide, or for product-related questions, please contact: 1-800-927-2744 in the USA/Canada 1-888-390-6456 on your TTY (Text Telephone) 2 Introduction
Inhaltszusammenfassung zur Seite Nr. 9
fcc.fm Page 3 Friday, February 21, 2003 12:15 PM FCC Licensing Information CP100 two-way radios operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC. Application is made available on FCC Form 601 and Schedules D, H, and Remittance Form 159. To obtain these FCC forms please request document 000601 which includes all forms and instructions. If you wish t
Inhaltszusammenfassung zur Seite Nr. 10
fcc.fm Page 4 Friday, February 21, 2003 12:15 PM Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representat
Inhaltszusammenfassung zur Seite Nr. 11
CP100 getstarted.fm Page 5 Monday, March 3, 2003 12:16 PM Getting Started This User’s Guide covers several CP100 models, and may detail some features your radio does not have. Your model number is shown on the inside of the radio and can been seen by removing the battery. Installing the Swivel Belt Holster 1. Slide the bottom of radio into the holster until it snaps into place. 2. To remove, push the tab above the battery door and pull the radio from holster. Note: In case of loss, pl
Inhaltszusammenfassung zur Seite Nr. 12
getstarted.fm Page 6 Monday, March 3, 2003 12:16 PM Installing the Nickel-Metal Hydride Battery Your radio is powered by an NiMH battery, which provides up to 15 hours* Ribbed of usage. Before you install the battery, Latch mark the date in the "INSTALL DATE" section with a permanent marker. As in vehicles, all rechargable batteries lose capacity over time. 1. Push and hold down the ribbed latch on the bottom of the radio toward the contacts, then slide and lift the battery door of
Inhaltszusammenfassung zur Seite Nr. 13
CP100 getstarted.fm Page 7 Monday, March 3, 2003 12:16 PM Charging the CP100 Radio Charge the NiMH battery for 16 hours before using it for the first time. It will only need up to eight hours of charging thereafter. Light 1. Make sure the radio is off. 2. Lift the accessory cover and plug the charger (NNTN4077) into the lower jack. 3. Plug the charger into a power outlet. The light on the charger glows during charging. Note: For optimum battery life, do not charge the battery for pr
Inhaltszusammenfassung zur Seite Nr. 14
getstarted.fm Page 8 Monday, March 3, 2003 12:16 PM Turning Your Radio On or Off Turn P clockwise for On or counterclockwise for Off. The radio chirps and the display briefly shows all features and display segments of your CP100 radio. k 188 218 Then the radio displays the current channel (larger number in the center) and the frequency assigned to that channel (on right). The interference eliminator code displays briefly. Then the current channel remains displayed. The transmit light on th
Inhaltszusammenfassung zur Seite Nr. 15
getstarted.fm Page 9 Monday, March 3, 2003 12:16 PM Basic Operation Use P to: Indicator Light Turn power on/off Adjust radio volume Use B to: Transmit call tone Use Accessory Jack for: Use M to: Radio plug-in charging Talk Audio accessories Exit a menu CP100 Use J to: Use \to: Monitor the frequency Lock the keypad Turn scan on/off* Scroll through available menus Use [ and ] to: Use T / S to: Change channels* *Access presets Change menu settings Microphone Speaker
Inhaltszusammenfassung zur Seite Nr. 16
getstarted.fm Page 10 Monday, March 3, 2003 12:16 PM Understanding the Display Scan Keypad Lock (15-Ch. Models Only) Scramble Battery Meter (2-Watt Models Only) Signal Strength Programming Frequency and Interference Mode Eliminator Code 1 Frequency Indicator Channel VOX/Microphone Gain 10 Getting Started
Inhaltszusammenfassung zur Seite Nr. 17
operation.fm Page 11 Monday, March 3, 2003 12:59 PM Battery and Charging Options You have several battery and charging options on your CP100 Two-Way Radio. NiMH Battery See “Installing the Nickel-Metal Hydride Battery” on page 6. Alkaline Batteries Your radio can also use 4 AA batteries; alkaline cells provide up to 24 hours* of radio use. 1. Push the ribbed latch on the bottom of the radio away from the CP100 battery door. 2. Slide and lift the battery door off. 3. Place the AA batteri
Inhaltszusammenfassung zur Seite Nr. 18
operation.fm Page 12 Monday, March 3, 2003 12:59 PM Charging with the Drop-in Charging Tray 10-Hour charger Drop-in (NNTN4019) charging tray (Not included with all models) 1. Place the drop-in charging tray on a flat surface. 2. Insert the plug of the 10-hour charger into the jack of the drop-in charging tray. 3. Plug the charger into a power outlet. Insert the battery or radio into the tray with the Motorola logo or radio front facing the front of the charger and the contacts facing
Inhaltszusammenfassung zur Seite Nr. 19
operation.fm Page 13 Monday, March 3, 2003 12:59 PM Reading the Battery Meter The battery meter located in the upper left corner of display indicates how much battery power you have remaining. Battery Type 3 Bars 2 Bars 1 Bar Flashing db c m NiMH 100%-85% 85%-25% 25%-10% Final 10% AA Alkaline 100%-75% 75%-40% 40%-10% Final 10% Battery Life Watts NiMH Alkaline 2 13 Hours 22 Hours 1 15 Hours 24 Hours 13 Battery and Charging Options
Inhaltszusammenfassung zur Seite Nr. 20
operation.fm Page 14 Monday, March 3, 2003 12:59 PM CP100 Factory Defaults Your CP100 radio is programmed at the factory. If you need to change settings, refer to Programming Features on page 20 and frequency list starting on page 34. To restore your radio to factory default programming, turn the radio on while holding the and \for three seconds. M 14 CP100 Factory Defaults
