Bedienungsanleitung Altinex MT107-203

Inhaltszusammenfassung zur Seite Nr. 1

®
MULTITASKER
MANUAL PART NUMBER: 400-0371-004
MT107-203
8-IN, TWISTED PAIR, SINGLE CHANNEL
INPUT CARD FOR MATRIX SWITCHER
USER’S GUIDE

Inhaltszusammenfassung zur Seite Nr. 2

MULTITASKER TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS................ 2 GENERAL..........................................................2 INSTALLATION..................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR MT107-203....................................... 3 TECHNICAL SPECIFICATIONS.............................. 3 PRODUCT DESCRIPTION ..............

Inhaltszusammenfassung zur Seite Nr. 3

MULTITASKER • This equipment has been tested and found to PRECAUTIONS / SAFETY WARNINGS 1 comply with the limits for a Class A digital Please read this manual carefully before using your device, pursuant to Part 15 of the FCC Rules. MT107-203. Keep this manual handy for future These limits are designed to provide reasonable reference. These safety instructions are to ensure protection against harmful interference when the the long life of your MT107-203 and to prevent fire equipment is

Inhaltszusammenfassung zur Seite Nr. 4

MULTITASKER ABOUT YOUR MT107-203 2 TECHNICAL SPECIFICATIONS 3 Specifications are subject to change. MT107-203 See www.altinex.com for up-to-date information. 8-In, Twisted Pair, Single Channel FEATURES/ MT107-203 The MT107-203 is an 8 Input expansion card for DESCRIPTION ® use with the MT107-104 64X64 Matrix Engine . GENERAL The MT107-203 is capable of receiving ALTINEX Input Connectors 8 Twisted Pair Standard signals from transmitters Twisted Pair Input RJ-45 female such as the DA1930CT. The

Inhaltszusammenfassung zur Seite Nr. 5

MULTITASKER PRODUCT DESCRIPTION 4 TOP RETAINER SCREW 8 1TP INPUTS BOTTOM RETAINER SCREW 400-0371-004 4

Inhaltszusammenfassung zur Seite Nr. 6

MULTITASKER APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP MT107-203 400-0371-004 5 MS8704TP MS8704TP DA1930CT DA1930CT

Inhaltszusammenfassung zur Seite Nr. 7

MULTITASKER DIAGRAM 2: INTERNAL VIEW POWER IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 TWISTED OUTPUT PAIR 40-PIN RJ-45 IDC IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 SIGNAL DETECT 400-0371-004 6

Inhaltszusammenfassung zur Seite Nr. 8

MULTITASKER INSTALLING YOUR MT107-203 6 OPERATION 7 Step 1. Turn off power to the MultiTasker 7.1 RS-232 CONTROL enclosure and remove the input AC power The MT107-203 has many advanced cord. remote-control capabilities as part of an Step 2. Locate the MT107-104 currently installed MT107-104 Matrix Switcher. These capabilities in the MultiTasker. Verify there is an are accessible through standard RS-232 empty slot in the enclosure for the new communication. The actual controlling can be

Inhaltszusammenfassung zur Seite Nr. 9

MULTITASKER Cause 3: The path is not selected. ALTINEX POLICIES 9 Solution: Make sure the input to output path is 9.1 LIMITED WARRANTY/RETURN POLICIES correctly selected. Please see the ALTINEX website at For example, Input 2 is connected to www.altinex.com for details on warranty and Output 1 in the Matrix Engine status. return policies. Physically, the source signal should 9.2 CONTACT INFORMATION be connected to Input 2 and the display cable should be connected ALTINEX, Inc. to Outp