Inhaltszusammenfassung zur Seite Nr. 1
Crestron TPS-GA-TPI
®
Isys G-Series Touchpanel Interface
Operations Guide
Inhaltszusammenfassung zur Seite Nr. 2
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.
Inhaltszusammenfassung zur Seite Nr. 3
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface Contents ® Isys G-Series Touchpanel Interface: TPS-GA-TPI 1 Introduction ...............................................................................................................................1 Features and Functions................................................................................................1 Internal Block Diagram ............................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface ® ® Isys Isys G-Series Touchpanel G-Series Touchpanel Interface: TPS-GA-TPI Interface: TPS-GA-TPI Introduction Introduction Features and Functions • High-performance touchpanel interface. ® • 24-Bit Isys graphics. • Synapse image rendering algorithm. • Dual-window HD video and RGB display. • Built-in real-time annotation. ® • High-speed Ethernet and Cresnet communications. • Single-space rack-mountable. ® The TPS-GA-T
Inhaltszusammenfassung zur Seite Nr. 6
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI ® Isys The TPS-GA-TPI offers vibrant 24-bit color depth with 8-bit alpha channel transparency to produce incredible 3D graphics and high-res images. The Isys engine supports dynamic graphics and text, full-motion animations, multimode objects, and PNG translucency - all with astonishing speed. Synapse™ Crestron's exclusive Synapse Image Rendering Algorithm enables system programmers to produce amazing graphics - faster and easier.
Inhaltszusammenfassung zur Seite Nr. 7
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface Internal Block Diagram The following diagram represents the internal configuration of the TPS-GA-TPI. These units feature two RGBHV inputs to receive RGBS and RGsB from a computer and two sets of three BNC connectors to receive video and HDTV (composite, S-video, and component) inputs. There is also a QM output for connection to a QM receiver or switcher. For more information, refer to “QuickMedia Wiring” on page 12. Internal Blo
Inhaltszusammenfassung zur Seite Nr. 8
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI Specifications Specifications for the TPS-GA-TPI are listed in the following table. TPS-GA-TPI Specifications SPECIFICATION DETAILS Device Support Mouse Microsoft Serial Mouse, Kensington Serial Mouse, Generic USB Mouse Touchscreen/Pen Display 3M Dynapro SC3, 3M Microtouch, CyberTouch, DisplayMate, Elo TouchSystems, SMART Technologies, 1 Wacom Processor ® CPU 32-bit Freescale ColdFire Microprocessor Processing Speed 410 MI
Inhaltszusammenfassung zur Seite Nr. 9
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface TPS-GA-TPI Specifications (Continued) SPECIFICATION DETAILS 3 Power Requirements Power Supply PW-2420RU (sold separately) Cresnet Power Usage 45 Watts (1.875 Amps @ 24 Volts DC) Default NET ID 03 Minimum 2-Series Control Version 3.155.1143 or later 4, 5, 6 System Update File Environmental Temperature 50° to 113°F (10° to 45°C) Humidity 10% to 90% RH (non-condensing) Enclosure Construction Black metal, 1U 19-inch rack-m
Inhaltszusammenfassung zur Seite Nr. 10
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI Physical Description This section provides information on the connections, controls and indicators available on your TPS-GA-TPI. TPS-GA-TPI Front View TPS-GA-TPI Rear View TPS-GA-TPI Physical View – Front 1.70 in (4.32 cm) TPS-GA-TPI Physical View – Top 10.68 in (27.13 cm) 9.97 in (25.32 cm) 17.03 in (43.26 cm) ® 6 • Isys G-Series Touchpanel Interface: TPS-GA-TPI Operations Guide – DOC. 6501
Inhaltszusammenfassung zur Seite Nr. 11
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface TPS-GA-TPI Physical View – Rear Location of Connections, Controls and Indicators (Front) 1 2 Location of Connections, Controls and Indicators (Rear) 5 13 3 7 9 11 4 6 8 10 12 14 Connectors, Controls & Indicators 1 # CONNECTORS , DESCRIPTION CONTROLS & INDICATORS 1 PWR LED (1) Green LED, indicates DC power applied to NET port or 24VDC jack. 2 RESET BUTTON (1) Recessed miniature pushbutton, reboots the touchpanel interface.
Inhaltszusammenfassung zur Seite Nr. 12
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI Connectors, Controls & Indicators (Continued) 1 # CONNECTORS , DESCRIPTION CONTROLS & INDICATORS 3 RGBHV OUT (1) DB15 HD female, RGB (VGA) output; Analog Format: RGBHV; Output Resolution: Software programmable 800x600, 1024x768, 1280x768, 1366x768, 1152x864, 1280x1024 Sync Output Type: RGBHV Sync Output Level: TTL, 4.0 V p-p Vertical Frequency: 60Hz fixed PIN SIGNAL PIN SIGNAL 1 Red 9 No Connect 2 Green 10 Ground
Inhaltszusammenfassung zur Seite Nr. 13
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface Connectors, Controls & Indicators (Continued) 1 # CONNECTORS , DESCRIPTION CONTROLS & INDICATORS 3 7 24VDC (1) 2 mm barrel DC power jack, 24 Volt DC power input; (PW-2420RU power supply sold separately). 3 8 NET Four-position terminal block connector for data and power. Connects to Cresnet control network. Pin 1 (24) Power Pin 2 (Y) Data Pin 3 (Z) Data Pin 4 (G) Ground
Inhaltszusammenfassung zur Seite Nr. 14
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI Connectors, Controls & Indicators (Continued) 1 # CONNECTORS , DESCRIPTION CONTROLS & INDICATORS 13 RGBHV IN (1 – 2) (2) DB15HD female, RGB (VGA) inputs; Analog Formats: RGBHV, RGBS and RG B S Input Resolution, Non-interlaced: 640x480 minimum to 1600x1200 maximum; Horizontal Frequency: 31.5 to 100 kHz Vertical Frequency: 60 to 85 Hz (60 Hz limit at 1600x1200) Standard HD15 connector configured to 2 optimize performance. PI
Inhaltszusammenfassung zur Seite Nr. 15
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface 4. The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying audio, video and microphone signals. The QM output port conforms to the 568B wiring standard. Refer to the following table for connector pinouts. QM ASSIGNMENT: COMPOSITE, RJ-45 PIN WIRE COLORS QM ASSIGNMENT: RGB S-VIDEO, COMPONENT AND NUMBER (EIA 568B) AUDIO 1 WHITE/ORANGE - RGB RED - CHROMINANCE (- P ) r 2 ORANGE + RGB RED + CHROMINANCE (+ P ) r 3 W
Inhaltszusammenfassung zur Seite Nr. 16
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators). • Fo
Inhaltszusammenfassung zur Seite Nr. 17
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface CresCAT-QM Cable CresCAT-QM Cable NOTE: Do not untwist the two wires in a single pair for more than 1/3-1/2” (0.84-1.27 cm) when making a connection. The twists are critical to canceling out interference between the wires. The aggregate cable length of a signal path originating at the TPS-GA-TPI and terminating at QM endpoint such as a TPS-12G/15G-QM-L must not exceed 450 feet (137 meters). Video signals may experience a loss o
Inhaltszusammenfassung zur Seite Nr. 18
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI QM Network Topology Origination Points Midpoints Endpoints QM QM QM TPS-GA-TPI TPS-12G/15G-QM-L QM-MD7x2 QM-MD7x2 QM QM QM-FTDC QM-RX QM QM-WMC The TPS-GA-TPI is an origination point. Therefore, in a QM system, it would be positioned as shown above. Identity Code Net ID The Net ID of the TPS-GA-TPI has been factory set to 03. The Net IDs of multiple TPS-GA-TPI devices in the same system must be unique. Net IDs are changed from a
Inhaltszusammenfassung zur Seite Nr. 19
® Crestron TPS-GA-TPI Isys G-Series Touchpanel Interface Upon entering SETUP MODE, the MAIN MENU, as shown in the following illustration, displays four buttons: Touch Screen Calibration, Exit and Run Program, Setup, and Diagnostics. The Exit and Run Program button verifies that all of the setup information has been saved to the EEPROM and displays the main page that has been programmed into your system. The remaining buttons on the MAIN MENU open other menus, which are discussed in subse
Inhaltszusammenfassung zur Seite Nr. 20
® Isys G-Series Touchpanel Interface Crestron TPS-GA-TPI Calibration Menu CALIBRATION MENU Touch Touchscreen Calibration on the MAIN MENU and then Perform Calibration on the CALIBRATION MENU. The message “Touch Upper Left” appears centered on the panel with a cross hair in the upper left corner. Touch the center of the cross hair in the corner of the screen to initiate calibration. Another message, “Touch Upper Right”, appears with a cross hair in the correct corner. Touch the center
