Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODEL
E2290V
www.lg.com
Inhaltszusammenfassung zur Seite Nr. 2
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national stan
Inhaltszusammenfassung zur Seite Nr. 3
Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures wh
Inhaltszusammenfassung zur Seite Nr. 4
Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benz
Inhaltszusammenfassung zur Seite Nr. 5
Accessories !!! Thank you for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Owner's Manual/Cards 15-pin D-Sub Signal Cable Power Cord AC-DC adapter (Depending on the country) DVI-D Signal Cable (This feature is not available in all countries.) NOTE This accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
Inhaltszusammenfassung zur Seite Nr. 6
Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚ to 15˚ -5 15 IMPORTANT It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. Do not touch or press the screen
Inhaltszusammenfassung zur Seite Nr. 7
Connecting the Display Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable and power cord in order, then tighten the screw 1 2 of the signal cable. A Connect DVI-D(Digital signal) Cable B Connect D-sub(Analog signal) Cable C Connect HDMI Cable NOTE This is a simplified representation of the rear view. This rear view represents a general mod
Inhaltszusammenfassung zur Seite Nr. 8
Connecting the Display 3. Press the power button on the stand base to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) Power Button NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO’ Function? When you encoun
Inhaltszusammenfassung zur Seite Nr. 9
Control Panel Functions Front Panel Controls Use this button to enter or exit from the On Screen Display. MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. 8
Inhaltszusammenfassung zur Seite Nr. 10
Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is 1920 x 1080 When two input signals at least are connected, you can INPUT Button select the input signal (D-SUB/DVI/HDMI) you want. When (SOURCE Hot key) only o
Inhaltszusammenfassung zur Seite Nr. 11
On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: Press the discretionary button, th
Inhaltszusammenfassung zur Seite Nr. 12
On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. D-SUB : D-SUB(Analog signal) input DVI-D : DVI-D(Digital signal) input HDMI : HDMI signal Main menu Sub-menu Supported input Description D-SUB BRIGHTNESS PICTURE To adjust the brightness, DVI-D CONTRAST contrast, sharpness, white HDMI balance and black level of the SHARPNESS screen D-SUB WHITE BALANCE HDMI BLACK LEVEL COLOR TEMP D-SUB To cus
Inhaltszusammenfassung zur Seite Nr. 13
On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Sub- menus Move to the upper menu Button Adjust (Decrease/Increase) Tip Select another sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual
Inhaltszusammenfassung zur Seite Nr. 14
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS To adjust the brightness of the screen. To adjust the contrast of the screen. CONTRAST SHARPNESS To adjust the clearness of the screen. : Move to the upper menu If the output of the video card is WHITE : Decrease different from the required BALANCE : Increase specifications, the color level may : Select another sub-menu deteriorate due to video signal distortion. Using this function, the signal level is
Inhaltszusammenfassung zur Seite Nr. 15
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PRESET Mode COLOR TEMP Select either PRESET or USER to adjust the screen color. Select the screen color. PRESET • sRGB: Set the screen color to fit the sRGB standard color specification. • 6500K to 7500K: Slightly reddish white. • 8500K to 9300K: Slightly bluish white. USER Mode USER RED Set your own red color levels. GREEN Set your own green color levels. BLUE Set your own blue color levels. GAMMA Set your own gam
Inhaltszusammenfassung zur Seite Nr. 16
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description D-SUB/DVI-D input NORMAL Select this when you want to use the product in the most general using environment. HDMI input STANDARD Select this when you want to use the original standard video. * In the General (Standard) mode, the is turned off. D-SUB/DVI-D input Select this when you are watching a MOVIE video or movie. HDMI input : Move to the upper menu , : Move 15
Inhaltszusammenfassung zur Seite Nr. 17
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description D-SUB/DVI-D input INTERNET Select this when you are working on the document (Word etc.) HDMI input Select this when you are playing a GAME game. D-SUB/DVI-D input This is used for advertising in the store. DEMO The screen will be divided to show the standard mode on the left and video mode on the right so that the consumers can check the difference after applying the video mode. HDMI input Select this when you watch
Inhaltszusammenfassung zur Seite Nr. 18
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description NORMAL The PhotoEffect function is disabled. GAUSSIAN This menu changes the screen to be more colorful and smoother. BLUR SEPIA This menu changes the screen to be Sepia tone (brown color). MONOCH This menu changed the screen to be Gray tone(black-and-white Picture) . -ROME : Move to the upper menu , : Move 17
Inhaltszusammenfassung zur Seite Nr. 19
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description HDMI input VOLUME To adjust the volume of headphone/ Earphone. (Only for HDMI input) : Move to the upper menu : Decrease : Increase : Mute 18
Inhaltszusammenfassung zur Seite Nr. 20
On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description LANGUAGE To choose the language in which the control names are displayed. ORIGINAL To adjust the image size. RATIO RTC If you set ON, you enable the Response Time Control function and reduce the afterimage of the screen. If you set OFF, you disable the : Move to the upper menu Response Time Control function and : Decrease operate at panel response time. : Increase : Select another sub-menu To select or turn off the B
