Inhaltszusammenfassung zur Seite Nr. 1
MultiSync 75F
MultiSync 95F
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
Declaration of the Manufacturer We hereby certify that the colour monitors MultiSync 75F (N0701) MultiSync 95F (N9902) are in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 50082-1 (IEC 801-2) (IEC 801-3) (IEC 801-4) and marked with NEC-Mitsubishi Electric Visual Systems Corporation 686-1, NISHIOI OI-MACHI ASHIGARAKAMI-GUN KANAGAWA 258-8533, JAPAN English-1 English
Inhaltszusammenfassung zur Seite Nr. 3
Safety Instruction Caution: When operating the MultiSync 75F/95F with a 220-240V AC power source in Europe except UK, use the power cord provided with the monitor. In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier. When operating the MultiSync 75F/95F with a 220-240V AC power source in Australia, use the power cord provided with the monitor. For all
Inhaltszusammenfassung zur Seite Nr. 4
FCC Information 1. Use the attached specified cables with the N9705 and N9902 color monitor so as not to interfere with radio and television reception. (1)Please use the supplied power cable or equivalent to ensure FCC compliance. (2)Shielded captive type signal cable. Use of other cables may cause interference with radio and television reception. 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
Inhaltszusammenfassung zur Seite Nr. 5
TCO‘99 Congratulation! You have just purchased a TCO‘99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and servi
Inhaltszusammenfassung zur Seite Nr. 6
The environmental demands concern restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental plan which must be adhered to in each country where the company impl ements i ts operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inact
Inhaltszusammenfassung zur Seite Nr. 7
Cadmium** Cadmium is present in rechargeable batteries and in the colourgenerating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. TCO‘99 requirement states that batteries, the colourgenerating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches, Mercury damages the nervous system and is toxic in high doses. TCO‘99 requirement
Inhaltszusammenfassung zur Seite Nr. 8
Contents MultiSync monitor box* should contain the following: • MultiSync Monitor MultiSync 75F or MultiSync 95F • Power cord • Captive Signal Cable • User‘s manual • CD-ROM includes complete User‘s Manual in PDF format and Windows related files (Inf file and color profile). To see the complete User‘s Manual, Acrobat Reader 4.0 must be installed on your PC. User’s Manual Captive Signal Cable Power Cord * Remember to save your original box and packing material to transport or ship the monitor. En
Inhaltszusammenfassung zur Seite Nr. 9
Quick Start To attach the MultiSync monitor to your system, follow these instruction: 1. Turn off the power to your computer and MultiSync monitor. 2. If necessary, install the display card. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1) Tighten all screws. For the Mac: Connect the MultiSync 75F or 95F Macintosh Cable Adapter (not included) to the mon
Inhaltszusammenfassung zur Seite Nr. 10
Mac Adapter (not included) 15-pin mini D-SUB Captive Signal Cable Figure B.1 Power Outlet Power cord Figure C.1 Figure D.1 English-9 English
Inhaltszusammenfassung zur Seite Nr. 11
Controls OSM (On-screen Manager) control buttons on the front of the monitor function as follows: SELECT Enters and exits the OSM menu. CONTROL-/+ Selects one of the controls and decreases or increases the adjustment. RESET Resets the highlighted control to the factory setting. Press -/+ button at the same time for approximately 1 sec. BRIGHTNESS: Adjusts the overall image and background screen brightness. CONTRAST: Adjusts the image brightness in relation to the background. (Contrast control is
Inhaltszusammenfassung zur Seite Nr. 12
Parallelogram: Decreases or increases the tilt of the sides either to the left or right. Bow (Pincushion Balance): Decreases or increases the curvature of the sides either to the left or right. Rotates: Rotates the image. Degauss: Select the degauss icon on “Icon select window” and push “SELECT” button. It will eliminate the stray magnetic field and correct the scan of the electron beam, which affect the purity, focus and convergence. Note: Allow a minimum interval of 20 minutes to elapse betwee
Inhaltszusammenfassung zur Seite Nr. 13
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Use the monitor in a clean, dry area. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert
Inhaltszusammenfassung zur Seite Nr. 14
• In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor. If a power cord is not supplied with this monitor, please contact you supplier. Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged. • If liquit has been spilled, or objects have fallen into the monitor. • If the monitor has been exposed to rain or wa
Inhaltszusammenfassung zur Seite Nr. 15
• Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 30 cm and no further away than 70 cm from your eyes. The optimal distance is 45 cm. • Rest your eyes periodically by focusing on an object at least 6 m away. Blink often. • Position the monitor at a 90° Xangle to windows and other light sources to minimize glare and reflections. Adjust th
Inhaltszusammenfassung zur Seite Nr. 16
Specifications Monitor Specifications MultiSync 75F Notes Picture Tube Diagonal: 43 cm (17 inch) 90° deflection, 0.25 mm trio dot pitch, medium short Viewable Image Size: 41 cm (16 inch) persistence phosphor, multi-layered, anti-static screen coating, semi-tint screen, Invar Shadow Mask and OptiClear screen. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composite sync. (Positive/Negative) (TTL Level)
Inhaltszusammenfassung zur Seite Nr. 17
Monitor Specifications MultiSync 95F Notes Picture Tube Diagonal: 48.3 cm (19 inch) 90° deflection, 0.25 mm trio dot pitch, medium short Viewable Image Size: 45.8 cm (18 inch) persistence phosphor, multi-layered, anti-static screen coating, semi-tint screen, Invar Shadow Mask and OptiClear screen. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composite sync. (Positive/Negative) (TTL Level) Depends on
Inhaltszusammenfassung zur Seite Nr. 18
Features Flat Dot Trio CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and reducing glare so that what you see on-screen is what you get on your printed output. OptiClear Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the flat square technology CRT, a high contrast screen with 0.25 mm trio dot pitch delivers crisp, clean text and graphics. Invar shadow Mask
Inhaltszusammenfassung zur Seite Nr. 19
IPM (Intelligent Power Manager) System: Provides innovative power- saving methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving your monitor energy costs, reducing emissions and lowering the air conditioning costs of the ® workplace and is compliant with VESA DPMS and EPA ENERGY STAR . Mode LED Indicator Power Saving On Green None Off (IPM Mode Orange Maximum (<5 Watts, Slow Recovery) Off (Power Switch, Off) No Light No Power Used (Fully Off) R
Inhaltszusammenfassung zur Seite Nr. 20
Troubleshooting No Picture • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • The signal cable should be completely connected to the display card/ computer. • Check the connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be completely attached to the computer. • Check the pin assignment and signal timing of your monitor and display card with respect to the recommended timing a
