Inhaltszusammenfassung zur Seite Nr. 1
Nuvo Video Display Systems – User Manual
Nuvo Surgical
Video Display System
Model V1360A
USER MANUAL
For Parts or Technical Assistance
USA and CANADA (800) 663-1152
INTERNATIONAL (814) 899-422
M2Z00167 Page 1
Inhaltszusammenfassung zur Seite Nr. 2
Nuvo Video Display Systems – User Manual Table of Contents Intended Use 3 Product Overview 4 Surgical Monitor Positioning 5 Instructions for Use 6 To Turn the Monitor On/Off 6 To Connect a Video Source to the Video Display System 7 To Connect the Video Display System to a Display or Recording Device 8 To Select a Video Signal for Display at a Monitor Using the Wall Control 9 To Select a Video Signal for Display at a Monitor Using the Monitor Handle 10 To Remove the Sterile Handle and
Inhaltszusammenfassung zur Seite Nr. 3
Nuvo Video Display Systems – User Manual Intended Use The Nuvo Video Display System The Nuvo Surgical Monitor is intended to be used primarily by a surgeon to view images generated by an endoscopic camera. Introduction This manual provides the information required for normal operation of the Nuvo Video Display System. Before operating the Nuvo Surgical Monitor, be sure that you have read and understand the contents of this manual. It is important that you read and strictl
Inhaltszusammenfassung zur Seite Nr. 4
Nuvo Video Display Systems – User Manual Nuvo Surgical Monitor Product Overview Positioning Monitor Features • Vertical axis rotates 300° • 19" flat-screen medical grade Liquid Crystal Display • Monitor rotates 300° • Up to four input channels (with optional switching system) • Drift-resistant positioning • Wall-mounted input/output selector (with optional • Minimal airflow disturbance switching system) • Stows out of the way • Single or dual monitor mounts Maintenance Featu
Inhaltszusammenfassung zur Seite Nr. 5
Nuvo Video Display Systems – User Manual Surgical Monitor Positioning The Nuvo Surgical Monitor system provides the surgeon with a suspension arrangement that is well balanced and can be guided easily into position. The suspension arms rotate 300° around the ceiling mount, and are positioned 180 ° apart to avoid interfering with each other. The counterbalance arm rotates 300° around its vertical extension. These extension pieces are custom-sized according to the ceiling height, a
Inhaltszusammenfassung zur Seite Nr. 6
Nuvo Video Display Systems – User Manual Instructions for Use of the Nuvo Video Display System The Nuvo Video Display System is designed to view images from multiple sources, such as endoscopic cameras, remote video cameras, radiology, pathology, PACS, etc. Systems may handle up to four separate input signals via an optional video switching board, although basic systems only handle one input. Each source can be easily selected and viewed by pressing a button on the wall contr
Inhaltszusammenfassung zur Seite Nr. 7
Nuvo Video Display Systems – User Manual To Connect a Video Source to the Video Display System CAUTION: Take care to align the pins on the connector with the holes in the plug on the input panel. Do not force the connector into the plug as this may damage the connector. Plug the video cable (supplied by others) into a Video Input Panel having the same video format. Composite Video S-Video RG
Inhaltszusammenfassung zur Seite Nr. 8
Nuvo Video Display Systems – User Manual To Connect the Video Display System to a Display CAUTION: Take care to align the pins on the connector with the holes in the plug on the output panel. Do not force the connector into the plug as this may damage the connector. Plug the video cable (supplied by others) into the nearest appropriate Video Output Panel. NOTE: Output panels are provided with sockets for each video format available for input signals, with the exception th
Inhaltszusammenfassung zur Seite Nr. 9
Nuvo Video Display Systems – User Manual To Select a Video Signal for Display at a Monitor Using the Optional Wall Control NOTE: This section applies only to systems with the optional video switching. NOTE: The Wall Control Panel is an optional feature and may not be included in the system. Identical functionality is available from the button, if provided, on the monitor’s sterilizable handle. 1. Determine whether Monitor A or Monitor B is to be switched. 2. Go to the Wall
Inhaltszusammenfassung zur Seite Nr. 10
Nuvo Video Display Systems – User Manual To Select a Video Signal for Display at a Monitor Using the Monitor Handle NOTE: This section applies only to systems with the optional video switching. Video Display Systems with switching capability may be provided with a button at the bottom of the sterilizable handle adjacent to each monitor. Channel selection is achieved by repeatedly pressing this button until the desired image is displayed. NOTE: The selection button on the h
Inhaltszusammenfassung zur Seite Nr. 11
Nuvo Video Display Systems – User Manual To Remove the Sterilizable Handle and Reinstall To Remove: Grasp the handle, and rotate it counterclockwise until the handle is loose. To Install: • Install the handle onto the monitor cradle. • Rotate the handle clockwise until fully seated against the O-Ring • Activate the selection button, if provided, to verify operation. NOTE: The Sterilizable Handle must be sterile during surgical procedures. Therefore, su
Inhaltszusammenfassung zur Seite Nr. 12
Nuvo Video Display Systems – User Manual Maintenance WARNING: Only facility-authorized maintenance personnel should perform maintenance on the Nuvo Surgical Monitor. Maintenance performed by unauthorized personnel could result in personal injury or equipment damage. Cleaning/Sterilization Cleaning: CAUTION: Care should be taken not to pour cleaning fluids onto the rotating joints or monitor. It is recommended to use a moist cloth to wipe down the joints and moni
Inhaltszusammenfassung zur Seite Nr. 13
Nuvo Video Display Systems – User Manual The sterilizable handle can be sterilized three ways: • Cold, by using cleaners recommended for hospitals and authorized by a competent health authority • Steam • Flash in either gravity displacement or pre-vacuum sterilizers The minimum flash exposure times are shown in the following table: Handle Cleaning and Sterilization Sterilize cycle Temperature Exposure Time Gravity displacement 270-274° F @ 30 psi (132-134° C @ 207 3 minutes kPa
Inhaltszusammenfassung zur Seite Nr. 14
Nuvo Video Display Systems – User Manual Preventive Maintenance Annual preventive maintenance must be performed by Nuvo authorized personnel to ensure all feature are functioning as originally designed. Pay particular attention to: • The condition of the video input and output connectors ® • System drift adjustment. See the picture below for Allen wrench sizes. Consumable Parts • Sterilizable handle with Control Button Part number S2A00074 • Sterilizable handle without Co
Inhaltszusammenfassung zur Seite Nr. 15
Nuvo Video Display Systems – User Manual Troubleshooting Image Not Displayed Monitor not powered on Turn monitor power switch to ON Video source not powered on Turn video source power switch to ON Damaged video cable Replace with good cable Input selection doesn’t match image Re-select the input using the wall control Incorrect monitor selection Select correct inputs for “A” and “B” monitors Incorrect input selection Select correct inputs for “A” and “B” monitors Mon
Inhaltszusammenfassung zur Seite Nr. 16
Nuvo Video Display Systems – User Manual Nuvo Video Display System Specifications Dimensions for Product V1360 Nuvo Video Display Systems Feature Dimension Counterbalance arm outer clevis to finish floor 78" (198 cm) Suspension arm inner hub center line to outer hub 26.75" (68 cm) center line Suspension arm inner hub center line to outer most 67" (170 cm) point on monitor frame Monitor size 19" (48 cm) Minimum ceiling height Maintaining a 78" (198 cm) minimum counterbalance arm
Inhaltszusammenfassung zur Seite Nr. 17
Nuvo Video Display Systems – User Manual Environmental Conditions for Transport and Storage Description Specification Temperature -4°F(-20°C) to 140°F (60°C) Relative humidity 20% to 90% non-condensing Pressure 50 kPa to 106 kPa Environmental Conditions for Use Description Specification Temperature 59°F (15°C) to 95°F (35°C) ambient temperature Relative humidity range 5% to 80% non-condensing Mains Power Requirements Rated Voltage Maximum Current Rated Frequency 10
