Inhaltszusammenfassung zur Seite Nr. 1
Epson AcuLaser CX11N/CX11NF
Note:
AcuLaser CX11N Parts
The CX11N instructions also apply to the CX11NF unless otherwise
indicated.
Paper stopper The illustrations in this guide show the Epson AcuLaser CX11NF, but
Auto Document Feeder
(CX11NF only) the instructions are the same as the CX11N unless otherwise
(CX11NF only)
Cover
indicated.
(CX11NF
only)
Accessories
Toner Cartridges
Cover C
Output tray
Cartridge Part number
Cover B
Extension tray
High Capacity Toner Cartridge (Yellow) S05018
Inhaltszusammenfassung zur Seite Nr. 2
Epson AcuLaser CX11N/CX11NF 1 First print speed 9.0 seconds for black-and-white printing Faxing (CX11NF Only) on A4 or Letter size paper Supported 17.0 seconds for color printing on A4 or communications Letter size paper lines PSTN (subscriber lines) 2 Warm-up time About 37.0 seconds at normal temperature PBX (independent premises internal lines) Paper feed Automatic or manual feed Communication speed 33600, 31200, 28800, 26400, 24000, Paper feed 21600, 19200, 16800, 14400, 12000, alignm
Inhaltszusammenfassung zur Seite Nr. 3
Epson AcuLaser CX11N/CX11NF Interfaces Toner Cartridges Colors Cyan, magenta, yellow, black USB Interface Cartridge life Standard Based on Universal Serial Bus 1 Specifications Revision 1.1, Universal Black Standard Capacity : 1,500 pages, Serial Bus Device Class Definition for High Capacity: 4,000 pages Printing Devices Version 1.1 Yellow Standard Capacity: 1,500 pages, Bit rate 12 Mbps (Full speed device) High Capacity: 4,000 pages Data encoding NRZI Magenta Standard Capacity: 1,500 pages,
Inhaltszusammenfassung zur Seite Nr. 4
Epson AcuLaser CX11N/CX11NF Paper Using the MP Tray 1. Open the MP tray cover. Single sheets 2. Pinch the knob and paper guide together, then slide the Size A4 (8.3 × 11.7 inches) right paper guide outward. A5 (5.8 × 8.3 inches) A6 (4.1 × 5.8 inches) Letter (8.5×11inches) Legal (8.5 × 14 inches) Half-letter (5.5 × 8.5 inches) Executive (7.3 × 10.5 inches) User Defined up to 8.66 × 14 inches Paper type Plain bond paper or special paper distributed by Epson Thickness 0.003 to 0.004 inch (0.08 t
Inhaltszusammenfassung zur Seite Nr. 5
Epson AcuLaser CX11N/CX11NF The available paper types for copying are not the same as those Removing Printouts from the Output Tray for printing. Depending on the paper source, available paper The output tray is located on the top of cover B and can hold types differ. When copying, you can only use the following up to 250 sheets. paper types: Paper source Paper type MP tray Plain paper, Semi-thick, Letterhead, Recycled paper, Colored paper, Transparencies, Labels Optional paper cassette P
Inhaltszusammenfassung zur Seite Nr. 6
Epson AcuLaser CX11N/CX11NF Paper Cassette Unit Placing Large or Thick Originals (CX11N Only) The optional Paper Cassette Unit can hold the following types and sizes of paper. When you scan large or thick originals, you can remove the document cover. Just open it and pull it straight up. Paper Type Paper Size Capacity Plain paper A4, Letter (LT) Up to 500 sheets in a cassette Total stack thickness: 2.2 in. Placing Originals for Copying and Scanning You can place originals on either the docu
Inhaltszusammenfassung zur Seite Nr. 7
Epson AcuLaser CX11N/CX11NF Home Mode is best when you want to preview images of Copying photos before scanning them. You can size the image as you scan, adjust the scan area, and adjust many image settings, Follow these steps to make a basic copy: including color restoration. 1. Make sure the product is turned on and paper is loaded. For ❏ Office Mode lets you quickly scan multi-page documents of instructions on loading paper, see page 4. the same size using the Auto Document Feeder. Offi
Inhaltszusammenfassung zur Seite Nr. 8
Epson AcuLaser CX11N/CX11NF Starting EPSON Scan With Another Scan modes Available settings Items Scanning Application Manual scan File Format PDF, TIFF, JPG Paper Size A4, B5, Letter, Legal 1. Start your scanning program. Double-click the program icon from your desktop, if it is Scanning available, or do one of the following: Follow these steps to scan: Windows: 1. Connect the CX11N to your computer with a USB cable or Select Start > All Programs or Programs > program a network cable as des
Inhaltszusammenfassung zur Seite Nr. 9
Epson AcuLaser CX11N/CX11NF Note: The Setup light turns on and the Setup menu appears in the Do not turn off the power or press any other button while faxing. LCD screen. If no button is pressed for more than 3 minutes, any changes made are canceled and the mode returns to the Print mode. 2. Place your original either on the document table or in the Auto Document Feeder. For details, see page 6. 3. Enter the recipient’s fax number directly from the numeric keypad on the control panel. Kee
Inhaltszusammenfassung zur Seite Nr. 10
Epson AcuLaser CX11N/CX11NF 1. Open the File menu and select Print. Macintosh 2. Click the Optional Settings tab. 1. Open the File menu and select Print. 2. Select Printer Settings from the pop-up menu, then select the Utility tab. Click your printer’s icon 3. Click EPSON Status Monitor 3. You see a window like this: 3. Click your printer’s icon. You see a window like this: You can monitor printer status and see information on toner levels, paper levels, and the remaining life of the
Inhaltszusammenfassung zur Seite Nr. 11
Epson AcuLaser CX11N/CX11NF Handling Precautions Consumable Replacement Messages Always follow these precautions when replacing a toner cartridge: When you see the following messages in the LCD screen or in the EPSON Status Monitor 3 window, you need to replace ❏ Install a genuine Epson toner cartridge. Using a non-Epson the indicated unit. You can continue printing for a short time toner cartridge may affect print quality. Other products after a message appears, but Epson recommends repl
Inhaltszusammenfassung zur Seite Nr. 12
Epson AcuLaser CX11N/CX11NF Warning: Removing and Replacing a Toner Do not touch the toner. Keep the toner away from your eyes. If Cartridge toner gets on your skin or clothes, wash it off with soap and water immediately. 1. Make sure the CX11N is turned on. 2. Check the color of the low or empty toner cartridge in the 6. Hold the tag and gently pull the toner seal upward and LCD screen, then open cover A. remove it. 7. Insert the toner cartridge with the arrow mark facing you. Push it al
Inhaltszusammenfassung zur Seite Nr. 13
Epson AcuLaser CX11N/CX11NF 5. Lift up cover B. Replacing the Photoconductor Handling Precautions Always follow these precautions when replacing the photoconductor: ❏ The photoconductor weighs 6.16 lb (2.8 kg). Be sure to hold it firmly by the handle when carrying it. ❏ Avoid exposing the photoconductor to light any longer than necessary. ❏ Be careful not to scratch the surface of the drum and belt. Also, avoid touching the drum; oil from your skin may permanently damage its surface and af
Inhaltszusammenfassung zur Seite Nr. 14
Epson AcuLaser CX11N/CX11NF Caution: 12. Slowly push down the scanner to its original position. Do not touch the belt on the top of the photoconductor or the blue area; otherwise, print quality may decrease. Cleaning the CX11N Avoid exposing the photoconductor to light any longer than necessary. If the CX11N’s outer case is dirty or dusty, turn off the Do not touch any other components inside the CX11N. CX11N and clean it with a soft cloth moistened with mild detergent. 9. Hold the photoc
Inhaltszusammenfassung zur Seite Nr. 15
Epson AcuLaser CX11N/CX11NF 3. Gently wipe the pickup roller inside the MP tray with a 4. Grasp the blue cleaner slowly and move it out and in once. moistened cloth. Pickup roller Note: Move the cleaner all the way out and in; otherwise, the CX11N Caution: may not be cleaned completely. Do not turn the pickup roller; otherwise the CX11N may be damaged. 5. Push in the blue lever inside the CX11N. Cleaning the Print Head 6. Close cover A and replace the cleaner cover. If there are white vertic
Inhaltszusammenfassung zur Seite Nr. 16
Epson AcuLaser CX11N/CX11NF 6. Attach the protective materials onto the product, then Cleaning the ADF Pickup Rollers (CX11NF repack the product in its original box. Only) If the Auto Document Feeder fails to feed paper, open the Caution: After transporting the product, set the transportation lock on the ADF cover on the left side. Then close the cover and and wipe left side of the document table in the unlocked position the rollers with a soft dry cloth to remove paper dust. before using
