Inhaltszusammenfassung zur Seite Nr. 1
User's Guide
M3203C
M3703C
Make sure to read the Safety Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
Temporary noise is normal when powering ON or OFF this device.
Inhaltszusammenfassung zur Seite Nr. 2
Connecting the stand - Only on some models. 1. Take the parts for the stand out of the box and assemble them as shown in the picture. First, check if the following parts are all present. Parts Screws (4) Stand (2) 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to secure the stand on the rear side of the product as shown in the diagram. 1 1
Inhaltszusammenfassung zur Seite Nr. 3
Connecting the Speakers - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model. When the speaker is installed. Cable tie *Connect the input terminal with a proper color match. * This feature is not available in all model. 2 2
Inhaltszusammenfassung zur Seite Nr. 4
To install Portrait - Only M3203C "When installing Portrait, rotate it clockwise based on its front." 3 3
Inhaltszusammenfassung zur Seite Nr. 5
Using the Remote Control Name of the Remote Control Buttons • Power On/Off Button • AV Button • Input Select Button (See next page) • Sleep Button • ARC button When watching AV, RGB PC,HDMI/DVI, Aspect Ratio Correction. Toggles Component through aspect ratio options. The product will be automatically turned • Auto Button off after a certain period of time. Automatic adjustment function Press this button repetitively to (Operational for the analog signal only) select an appropriate time dur
Inhaltszusammenfassung zur Seite Nr. 6
Using the Remote Control • AV Button • Input Select Button If you press the button once, Toggles through video the following Input Signal AV Component Window will appear. Select RGB PC HDMI/DVI the signal type you want using the button. Input AV Component RGB PC HDMI/DVI ▲▼ Inserting batteries into remote control. 1. Slide off the battery cover. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cover. • Dispose of used ba
Inhaltszusammenfassung zur Seite Nr. 7
Name and Function of the Parts * The product image in the user's guide could be different from the actual image. Rear View Power Connector : Connect the power cord RS-232C Serial Ports RGB PC, HDMI/DVI Ports -HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card. Wired Remote Control Port AV Ports LAN Port Speaker Po
Inhaltszusammenfassung zur Seite Nr. 8
Connecting to External Devices When Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable. A When connecting with the HDMI to DVI signal input cable (not included). B * When HDMI PC is used, a compatiblity problem might occur. A PC Rear side of the product. PC/MAC MAC Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adap
Inhaltszusammenfassung zur Seite Nr. 9
Connecting to External Devices 1 Turn on power by pressing the power button on the product. Power button Turn on the PC. 2 Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET ▼▲ Or, press the INPUT button on the back of the product. Input Input INPUT AUTO/SET ▼▲ AV AV Component A When connecting with a D-Sub signal input cable. Component RGB PC • Select RGB PC : 15-pin D-Sub analog signal. RGB PC HDMI/DVI HDMI/DVI B When connecting wi
Inhaltszusammenfassung zur Seite Nr. 10
Connecting to External Devices When using the LAN Connect the LAN cable as shown in the below figure . A Connect PC to Monitor directly. B Using a router(Switch) LAN LAN Switch Product PC Product PC C Using the Internet. Network LAN Network Product PC Network Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM. For more information about the program, please refer to eZ-Net Guide in the enclosed CD-ROM. Note • Using LAN establishes communication between your PC and the m
Inhaltszusammenfassung zur Seite Nr. 11
Connecting to External Devices Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product. • To use different products connected to each other Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products. 15-pin D-Sub Signal Cable PC Product 2 Product 3 Product 4 Product 1 Note • When multi-connecting in/out cascade format, no loss cabl
Inhaltszusammenfassung zur Seite Nr. 12
Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and not available from LG. Refer to the instructions included with wall mount for more info. Kensington Security Slot The Set is equipped with a kensington Security System connector on the back panel. The cable and lock are available separate and are not sold by LG. For more info, visit http://www.kensington.com, the internet home pag
Inhaltszusammenfassung zur Seite Nr. 13
Connecting to External Devices Video Input Connect the video cable as shown in the below figure and then connect the power cord (See page 7). When connecting with a S-Video cable. When connecting with a BNC cable. A B • Connect to the S-Video input terminal to • Connect the input terminal with a watch high image quality movies. proper color match. Product Product Audio Cable (not included) Audio Cable BNC Cable (not included) S-Video Cable (not included) (not included) VCR/DVD Receiver VCR/
Inhaltszusammenfassung zur Seite Nr. 14
Connecting to External Devices Component Input (480p/576p/720p/1080p/1080i/480i/576i) Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page 7). • Connect the input terminal with a proper color match. Product BNC Cable Audio Cable (not included) (not included) HDTV Receiver Note - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP. Select an input signal. Press the INPUT button on the remote control to
Inhaltszusammenfassung zur Seite Nr. 15
Connecting to External Devices HDMI Input (480p/576p/720p/1080i/1080p) - HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protec- tion). Some devices require HDCP in order to display HD signals. Connect the video/audio cable as shown in the below figure and then connect the power cord (See page 7). Product Product RCA-PC HDMI to DVI Audio Cable Signal Cable HDMI Signal Cable (not included) (not included) (not included) VCR/DVD/Set-top Box VCR/DVD/Set-top Box Note
Inhaltszusammenfassung zur Seite Nr. 16
Connecting to External Devices Watching AV Outputs - When using AV input, you can connect the AV Out to other monitors. Video/TV BNC Cable Audio Cable (not included) (not included) Product Audio Cable BNC Cable (not included) (not included) Video/TV Note • When multi-connecting in/out cascade format, no loss cables are recommended. We recommend that you should use cable distributor. 15 15
Inhaltszusammenfassung zur Seite Nr. 17
User Menus Screen Adjustment options • Press this button to turn on the power. Press this button again to Power Button turn it off. • This Indicator lights up green when the display operates normally(on Power Indicator mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. • Use this button to show/hide the OSD (On Screen Display) menu MENU Button screen. • Use this button to select an icon or adjust the setting in the OSD screen. OSD Select / Adjust B
Inhaltszusammenfassung zur Seite Nr. 18
User Menus Screen Adjustment options [For PC Analog signal] AUTO/SET Button Auto in progress For optimal display change resolution to 1360x768 [When XGA Mode is active and 1360 X768 is selected] Auto in progress INPUT AUTO/SET ▼▲ INPUT Button - Toggles between inputs Input A V Composite Video, Separate Video AV Component HDTV, DVD Component RGBPC 15-pin D-Sub analog signal RGB PC HDMI/DVI Digital signal HDMI/DVI ▲▼ • This is where the unit receives signals from the remote control.
Inhaltszusammenfassung zur Seite Nr. 19
User Menus OSD Menu Icon Function Description Adjusts screen brightness, contrast and color that you prefer. Picture Adjusts the audio options. Audio Adjusts the timer options. Time Adjusts the screen status according to the circumstances. Option Adjust Set ID and check Serial No. and SW version and IP address Information Note OSD(On Screen Disp lay) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.
Inhaltszusammenfassung zur Seite Nr. 20
User Menus How to adjust the OSD (On Screen Display) screen Save Pops up Move where Move where Exit from the Select a Select a Adjust the status adjustment the menu you want to you want to menu screen. menu icon menu icon screen adjust adjust • Use the remote control to adjust the OSD screen. Press the MENU Button, then the main menu of the OSD appears. 1 To access a control, use the Buttons. 2 When the icon you want becomes highlighted, press the SET Button. 3 Use the
