Inhaltszusammenfassung zur Seite Nr. 1
Dell Precision Mobile Workstation M4700
Owner's Manual
Regulatory Model: P21F
Regulatory Type: P21F001
Inhaltszusammenfassung zur Seite Nr. 2
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc. All Rights Reserved. ™ ™ ™ ™ ™ ™ Trademarks used in this text: Dell , the DELL logo, Dell Precision , Precision ON ,ExpressCharge , Latitude , Latit
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1 Working on Your Computer....................................................................................................... 7 Before Working Inside Your Computer.....................................................................................................................7 Recommended Tools................................................................................................................................................ 8 Turning Off Your Computer................
Inhaltszusammenfassung zur Seite Nr. 4
Installing the Video-Card Fan................................................................................................................................. 28 Removing the Coin-Cell Battery..............................................................................................................................28 Installing the Coin-Cell Battery...............................................................................................................................29 Removing the Palm
Inhaltszusammenfassung zur Seite Nr. 5
Assigning a System Password and Setup Password...................................................................................... 68 Deleting or Changing an Existing System and/or Setup Password..................................................................68 4 Diagnostics.................................................................................................................................71 Enhanced Pre-Boot System Assessment (ePSA) Diagnostics...................................
Inhaltszusammenfassung zur Seite Nr. 6
6
Inhaltszusammenfassung zur Seite Nr. 7
1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: • You have read the safety information that shipped with your computer. • A component can be replaced or--if purchased separately--installed by performing the removal procedure in reverse orde
Inhaltszusammenfassung zur Seite Nr. 8
NOTE: To avoid damaging the system board, you must remove the main battery before you service the computer. 7. Remove the main battery. 8. Turn the computer top-side up. 9. Open the display. 10. Press the power button to ground the system board. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the display. CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the
Inhaltszusammenfassung zur Seite Nr. 9
2. Click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down.. 2. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 4 seconds to turn them off. After Working Inside Your Computer After you complete any replacement procedure, ensure you connect any external devices, cards, and cables b
Inhaltszusammenfassung zur Seite Nr. 10
10
Inhaltszusammenfassung zur Seite Nr. 11
2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Removing the Secure Digital (SD) Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Press in on the SD card to release it from the computer. Slide the SD card out of the computer. Installing the SD Card 1. Push in the SD card into its slot until it clicks into place. 2. Follow the procedures in After Working Inside Your Computer. Rem
Inhaltszusammenfassung zur Seite Nr. 12
3. Flip and remove the battery from the computer. Installing the Battery 1. Slide the battery into its slot until it clicks into place. 2. Follow the procedures in After Working Inside Your Computer. Removing the Subscriber Identity Module (SIM) Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 12
Inhaltszusammenfassung zur Seite Nr. 13
3. Slide the SIM card out from the slot . Installing the Subscriber Identity Module (SIM) Card 1. Push in the SIM card into its slot. 2. Install the battery. 3. Follow the procedures in After Working Inside Your Computer. Removing the Base Cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover. 13
Inhaltszusammenfassung zur Seite Nr. 14
4. Flip and remove the base cover from the computer. 14
Inhaltszusammenfassung zur Seite Nr. 15
Installing the Base Cover 1. Slide in and place the base cover to align with the screw holes correctly on the computer. 2. Tighten the screws to secure the base cover to the computer. 3. Install the battery. 4. Follow the procedures in After Working Inside Your Computer. Removing the Keyboard Trim 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Pry up the keyboard trim starting from the top-inner edge. 4. Pry up the bottom edge of the keyboard trim from
Inhaltszusammenfassung zur Seite Nr. 16
Installing the Keyboard Trim 1. Toe-in the keyboard trim from the front and align it to its original position on the computer. Ensure that the hard-tab on the left corner snaps into place. 16
Inhaltszusammenfassung zur Seite Nr. 17
2. Press along the sides of the keyboard trim until it snaps in place. 3. Install the battery. 4. Follow the procedures in After Working Inside Your Computer. Removing the Keyboard 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) keyboard trim 3. Remove the screws that secure the keyboard to the computer. 17
Inhaltszusammenfassung zur Seite Nr. 18
4. Starting from the bottom of the keyboard, separate the keyboard from the computer and flip the keyboard over. 5. Disconnect the keyboard-data cable from the system board and remove the keyboard. 18
Inhaltszusammenfassung zur Seite Nr. 19
Installing the Keyboard 1. Connect the keyboard-data cable to the system board. NOTE: Ensure that you fold the keyboard-data cable in perfect alignment. 2. Press the keyboard in its compartment. 3. Tighten the screws to secure the keyboard to the computer. 4. Press over the cross section of the following keys to secure the keyboard to the computer: a) , , and keys b) over the <9> key c) NUMLOCK <9> key 19
Inhaltszusammenfassung zur Seite Nr. 20
5. Install the: a) keyboard trim b) battery 6. Follow the procedures in After Working Inside Your Computer. Removing the Primary Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) base cover 3. Pry the retention clips away from the primary memory until it pops up. Lift the primary memory and remove it from the computer. Installing the Primary Memory 1. Insert the primary memory into the memory socket. 2. Press the clips to secure the primary mem
