Resumen del contenido incluido en la página 1
DXAI 7288-2
Resumen del contenido incluido en la página 2
UP038.book 1 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Contents Using Call Waiting 21 Welcome/Features 2 RocketDial 22 Controls and Functions 3 RocketDial 22 Terms Used in this Manual 5 Storing the RocketDial 22 Getting Started 6 Using the Speed Dial Memory 23 Installing the Phone 6 Using the Speed Dial Memory 23 A. Choose the Best Location 6 Storing Names and Numbers in Speed Dial Memory 23 B. Install the Rechargeable Battery Packs into Storing Caller ID Messages in Speed Memory Locations 26 the Handsets
Resumen del contenido incluido en la página 3
UP038.book 2 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Congratulations on your purchase of the Uniden dual handset cordless telephone and answering Welcome system. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note:Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless phone may vary. • 2.4GHz Extended Range Technology 10 Speed Di
Resumen del contenido incluido en la página 4
CONTROL S & FUNCTIONS UP038.book 3 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Controls and Functions 1. Handset antenna Handsets 2. Jack for optional headset 3. Beltclip hole 1 4. Handset battery compartment 5. Handset earpiece 6. LCD display 7. caller id/menu key (pages 14 and 28) 2 5 8. / /vol/ (earpiece volume, ringer volume and scroll) key (pages 14, 17 and 19) 3 9. /tone/ ← key (left cursor) key * 6 (pages 20 and 23) 10. redial/pause key (pages 19 and 25) 7 12 11. select/channel key (pages 14, 20 and
Resumen del contenido incluido en la página 5
CONTROL S & FUNCTIONS UP038.book 4 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Main Base 20. Telephone line jack 21. DC IN 9V jack 22. Main base antenna 20 21 23. Main base speaker 24. (repeat/rewind) key (page 44) 25. memo rec (record) key (page 47) 26. menu/clock key (pages 34 and 37) 22 27. ringer key (page 42) 28. Main base charging contacts 29. charge in use LED 30. (play/stop) key (pages 42 and 43) 31. (skip/fast forward) key (page 45) 29 23 32. (delete) key (page 46) 30 33. greeting key (page 41) 24 3
Resumen del contenido incluido en la página 6
CONTROL S & FUNCTIONS UP038.book 5 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Extra Charging Cradle for Second Handset 39. Charging contacts 40. Charge LED 41. DC IN 9V jack 41 39 40 Terms Used in this Manual Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has not been pressed and there is no dial tone. Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone. CID - Caller ID CIDCW - Caller ID on Cal
Resumen del contenido incluido en la página 7
GET T I N G STARTE D UP038.book 6 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Installing the Phone Do the following steps: note A. Choose the Best Location B. Install the Rechargeable Battery Packs into the Handsets C. Connect the Main Base and Charging Cradle, and Charge the Handsets If your home has D. Mount the Main Base on a Wall specially wired alarm equipment connected to A. Choose the Best Location the telephone line, be When choosing a location for your new phone, here are some important guideline
Resumen del contenido incluido en la página 8
GET T I N G STARTE D UP038.book 7 ページ ２００４年１月２６日 月曜日 午前１０時１７分 B. Install the Rechargeable Battery Packs into the Handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in ! the main base or charging cradle. •Use only the Uniden 1) Press down on the handset battery case cover (use the finger (BT-905) indention for a better grip) and slide the cover downward to rechargeable battery remove. pack supplied with your c
Resumen del contenido incluido en la página 9
GET T I N G STARTE D UP038.book 8 ページ ２００４年１月２６日 月曜日 午前１０時１７分 C. Connect the Main Base and Charging Cradle, and Charge the Handsets 1) Connect the AC adapter to the DC IN 9V jack and to a ! standard 120V AC wall outlet. 2) Place one handset in the main base and the other in the Use only the supplied charging cradle with the keypad facing forward. AD-314 AC adapter for the main base and 3) Make sure the charge in use LED and charge LED illuminate. AD-310 for the If the LED does not illu
Resumen del contenido incluido en la página 10
GET T I N G STARTE D UP038.book 9 ページ ２００４年１月２６日 月曜日 午前１０時１７分 D. Mount the Main Base on a Wall Standard wall plate mounting This phone can be mounted on any 1 standard wall plate. 1) Locate the wall mount adapter on the main base as shown and slide the wall mount adapter into the notches on the main base bottom with the 2 tab pressed. 5 2) Plug the AC adapter to the DC IN 9V jack. 7 6 3) Route the AC adapter cord through the molded wiring channel as shown. 7 4) Plug the AC adapter into
Resumen del contenido incluido en la página 11
GET T I N G STARTE D UP038.book 10 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. Make sure the wall material is capable
Resumen del contenido incluido en la página 12
GET T I N G STARTE D UP038.book 11 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Headset Installation Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headset may be purchased by calling the Uniden Parts Department or visiting the web site. See page 54.) [11] GETTING STARTED www.uniden.com
Resumen del contenido incluido en la página 13
GET T I N G STARTE D UP038.book 12 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Register Handsets to the Main Base before Using! Whichever handset you choose to charge in the main base will automatically register to the note main base. The second handset (charging in the extra charging cradle) MUST also be registered to the When you charge the main base before use. Follow the steps below to register the second handset. handsets, Caller ID summary screen and the name of the 1) Be sure both handsets are fu
Resumen del contenido incluido en la página 14
GET T I N G STARTE D UP038.book 13 ページ ２００４年１月２６日 月曜日 午前１０時１７分 When to Re-register Handsets note 1) You’ll need to re-register the second handset (follow steps on page 12) each time the digital security code is changed. Refer to page 51 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a Make sure to return the move), both handsets will need to be
Resumen del contenido incluido en la página 15
GET T I N G STARTE D UP038.book 14 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Basic Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Headset 1 shows HS1 in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by u
Resumen del contenido incluido en la página 16
GET T I N G STARTE D UP038.book 15 ページ ２００４年１月２６日 月曜日 午前１０時１７分 You must subscribe to Caller ID service through your local telephone provider to use this feature. 1) When the phone is in standby mode, press and hold the caller id/ menu key. The following screen appears. 2) Press the /vol/ key to select CIDCW. 3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting. 4) Press the end key and return the handset to the main base to complete the setting. The handset return
Resumen del contenido incluido en la página 17
GET T I N G STARTE D UP038.book 16 ページ ２００４年１月２６日 月曜日 午前１０時１７分 4) Use the number keys (0 - 9) to enter the 3-digit area code. If you make an error, use the delete/transfer key to backspace. note 5) Press the select/channel key. A confirmation tone sounds. 6) Press the end key to complete the setting. The handset returns to standby mode. If you are not sure of your dialing system, make a trial call. If the Choosing the Dialing Mode call connects, leave the setting as is. Most phone syste
Resumen del contenido incluido en la página 18
GET T I N G STARTE D UP038.book 17 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Setting the Language There are three languages to choose from: English, French and Spanish. 1) When the phone is in standby mode, press and hold the caller id/ menu key. The following screen appears. 2) Press the /vol/ key four times to select Language. 3) Press the select/channel key to select Eng, Fr. or Esp. 4) Press the end key to complete the setting. The handset returns to standby mode. Selecting the Ring Tone and Volume You
Resumen del contenido incluido en la página 19
BA SI C S UP038.book 18 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Using Your Phone note Making and Receiving Calls Making a call Refer to page 14 1) Remove the handset from the cradle. "Basic Setup" to turn On 2) Press the talk/flash key. the AutoTalk feature if desired. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk/flash key. Receiving a call 1) Remove the handset from the cradle. (If AutoTalk is on, the phone will automa
Resumen del contenido incluido en la página 20
BAS I CS UP038.book 19 ページ ２００４年１月２６日 月曜日 午前１０時１７分 Redialing the last dialed number 1) Remove the handset from the cradle. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Press the redial/pause key. OR 1) Remove the handset from the cradle. 2) Press the redial/pause key. 3) Press the talk/flash key. Adjusting the Earpiece Volume To change the earpiece volume, press the /vol/ or /vol/ key during a call. Temporarily Mute Ringer If the handset is off the cradle while an incoming ca
