Resumen del contenido incluido en la página 1
INTRODUCTION
Thank you for purchasing a VTech cord- When the VTech VT 2910c is not in
less telephone. This manual is designed use, you can easily answer a call on
to familiarize you with your VT 2910c. To the Handset by pressing any key other
get the maximum use from your new than the OFF or Volume keys. This is
phone, we suggest that you read this In-
very useful in a dark environment.
struction Manual before using your VT
2910c . Your VT 2910c provides one way
Paging from the Base Unit to
Resumen del contenido incluido en la página 2
INTRODUCTION SPECIAL FEATURES • 900MHz Operation • Extension In Use indication • Fully Digital Link between Handset • Intercom/Page/Handset Locator and Base Unit with ADPCM voice • Non-volatile memory of stored coding for enhanced audio quality phone numbers and CID records • Digitally-Scrambled Voice • Long-life NiCad Battery provides up Communication for call security to 6 hours of talk time or 5 days of • Two-line Capability standby • Alphanumeric Call Waiting Caller • Digital Volume Control
Resumen del contenido incluido en la página 3
INTRODUCTION Parts Check List 1. Base Unit, Handset and AC Adaptor 2. Longer Two-Line Telephone Cords 3. Shorter Telephone Cord(for mounting) 4. Battery Pack 5. Mounting screws for wall mounting 6. Wall mount bracket MEMORY DIALING 1 11 1 LINE 2 FLASH FLASH 2 12 POWER 3 13 LINE 1 LINE 2 4 OFF 14 5 15 6 16 CHARGING 7 17 1 2 abc 3 def 8 18 SPARE BATT 9 19 10 20 ghi 6 4 5 jkl mno 7 pqrs 8 tuv wxyz 9 DIGITAL CORDLESS 900MHz VOLUME VT 2910c tone 0 oper * INT.COM HOLD MUT
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions VIII.Do not allow anything to rest on the When using your telephone, please power cord. Do not locate this follow these basic safety precautions product where the cord will be to reduce the risk of fire, electric shock abused by persons walking on it. or injury to persons: I. Read and understand all IX. Never push objects of any kind into instructions. this product through cabinet slots as they may touch dangerous voltage II. Follow al
Resumen del contenido incluido en la página 5
IMPORTANT SAFETY INSTRUCTIONS the risk of fire or electric shock. operation. XII.Unplug this product from the wall E.If the product has been dropped and outlet : the cabinet has been damaged. F.If the product exhibits a distinct A.When the power supply cord or plug change in performance. is damaged or frayed. XIII.Avoid using a telephone (other than B.If liquid has been spilled into the a cordless type) during an electrical product. storm. There may be a remote risk of electric shock from light
Resumen del contenido incluido en la página 6
RECHARGEABLE BATTERY PACKS Charging the Handset batteries Spare Battery Charger The Handset of your VTech 2910c cord- Alternatively, if you have purchased a less telephone is powered by a re- spare battery pack and it has been chargeable battery pack. It charges charging in the base unit, simply automatically whenever the Handset is exchange the drained Handset battery in the Base Unit cradle. You should pack with the fully charged replacement charge the battery pack for 16 hours battery pack
Resumen del contenido incluido en la página 7
RECHARGEABLE BATTERY PACKS Replacing The Handset Battery 4. The new battery pack must be Pack charged before using your tel- 1. Remove the battery cover by press- ephone. Place the Handset in the ing on the ridged lines and sliding cradle of the Base Unit to allow it to downward. charge for 16 hours. POWER CHARGING SPARE BATT PRESS and SLIDE DOWNWARD CHARGE THE HANDSET BATTERY PACK FOR 16 HOURS BEFORE USING 2. Discard the old battery pack. Don’t put the old battery pack in a trash CAUTION: To
Resumen del contenido incluido en la página 8
RECHARGEABLE BATTERY PACKS IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT: Do not dispose of this battery into household garbage. For information on tecycling or proper disposal, consult your local solid waste collection or disposal organization. To order replacement batteries, con- tact VTech Customer Service at 1- 800-595-9511 in thr U.S. or 1-800- 267-7377 in Canada. 8 VT2910C EN MANU 8 12/16/99, 6:16 AM
Resumen del contenido incluido en la página 9
WALL MOUNTING The Wall Mount adaptor is designed to fit on standard Wall Mount plates. 1. Choose a spot near an electrical outlet and a telephone jack. Your phone requires a modular telephone jack and a standard electrical outlet (120v AC). The power cord is six feet long; make sure there is an elec- trical outlet within reach of the base. The outlet should not be controlled by a wall switch. If the switch is ever turned off, the phone will not oper- ate. 2. Position the wall mount adaptor on
Resumen del contenido incluido en la página 10
HANDSET FEATURES HANDSET FEATURES ANTENNA DISPLAY BELT CLIP NOTCH VOLUME UP KEY VOLUME DOWN KEY 1 LINE 2 LINE (FLASH) KEYS FLASH FLASH LINE 1 LINE 2 OFF OFF KEY 1 2 abc 3 def DIALING KEYS ( 0-9) 7.DATE KEY 4 ghi 5 jkl 6 mno 9.VIEW KEY wxyz 7 pqrs 8 tuv 9 * AND TEMPORARY TONE AND REVERSE SCROLL KEY tone 0 oper * # AND FORWARD SCROLL KEY CALLER ID KEY REDIAL HOLD CID PAUSE HOLD AND PAUSE KEY MEM CONF INT.COM REDIAL KEY CLEAR DELETE PROG INTERCOM AND DELETE KEY CONFERENCE AND CLEAR K
Resumen del contenido incluido en la página 11
HANDSET FEATURES LINE 1 KEY OFF KEY Press this key to select LINE 1. Press this key to end your call. If the Handset has already accessed Press this key to exit from MEMORY LINE 1, pressing this key will FLASH DIALING, CID, or any programming the line. mode. If LINE 1 is on HOLD, pressing this key In CONFERENCE mode, pressing this will take LINE 1 off HOLD and return key will disconnect both lines. you to your call. If LINE 2 is IN USE, or you are in *TONE KEY CONFERENCE mode, pressing this key
Resumen del contenido incluido en la página 12
HANDSET FEATURES REDIAL KEY 1. LINE 1 is on a call and LINE 2 is on Press this key to display and/or dial the HOLD last number you called. 2. LINE 2 is on a call and LINE 1 is on HOLD When the Handset is On (with dial tone), 3. Both lines are on HOLD. press this key to dial the last number called. NOTE: While in CONFERENCE mode, MEMORY DIALING numbers and CID When the Handset is Off, pressing this records cannot be accessed. key will display the last dialed phone number on the LCD. You can the
Resumen del contenido incluido en la página 13
HANDSET FEATURES While you are reviewing CID or The VT 2910c is also equipped with a MEMORY DIALING records, press and detachable belt clip. Align the pins on hold this key to delete the record the inside edge of the belt clip with the currently displayed. The LCD will notches on the inside of the VT 2910c confirm deletion. Handset. The belt clip should snap securely into place. Do not force the connection. See illustration VOLUME CONTROL KEY Located on the edge of the Handset opposite the ante
Resumen del contenido incluido en la página 14
EXAMPLES OF THE LCD DISPLAY Base Unit is attempting to contant The handset has accessed LINE 1 Handset via INTERCOM key The handset has accessed LINE 2 LINE 1 on hold The Base Unit has accessed LINE 1 LINE 2 on hold The handset has accessed LINE 1, Extension phone is using LINE1 while the Base Unit has accessed LINE 2 Extension phone is using LINE2 Both handset and Base have accessed LINE 1 Handset is in Conference mode with LINES 1 & 2 Current Handset volume level Base Unit is in Conference mod
Resumen del contenido incluido en la página 15
EXAMPLES OF THE LCD DISPLAY Handset is asking for 2-digit location Example of alphanumeric CID display during Memory Dial programming while the phone is ringing A mistake was made during Memory Press & hold 7 key while reviewing CID Dial programming records to view the phone # and when it came in Enter a 2-digit location for Memory (Speed) Dialing Scrolling through the CID records, this displays the caller’s name, CID location, and LINE The contents of a Memory Dial location have been deleted Pr
Resumen del contenido incluido en la página 16
EXAMPLES OF THE LCD DICPLAY The contents of Memory Dial location Example of the LCD as you select a #13 ringer type You have deleted Memory Dial location The name and number of the caller are #15 unavailable as the call comes in To prevent accidental deletions of all As the phone rings, this indicates that CID records or Memory Dial locations, the caller has blocked CID information this message prompts you to confirm your decision As you review CID records, this indi- cates that the name and/or
Resumen del contenido incluido en la página 17
BASE UNIT FEATURES BASE UNIT FEATURES MEMORY DIALING 1 11 2 12 POWER 3 13 POWER INDICATOR 4 14 MEMORY DIALING CARD 5 15 CHARGING CHARGING INDICATOR 6 16 7 17 8 18 SPARE BATT INDICATOR 9 19 SPARE BATT SPARE BATT CHARGING 10 20 COMPARTMENT VOLUME UP KEY DIGITAL CORDLESS 900MHz VOLUME VOLUME DOWN KEY HOLD KEY VT 2910c MUTE KEY INT.COM HOLD MUTE CONF. CONFERENCE KEY INTERCOM KEY LINE 1 LINE 2 OFF MUTE INDICATOR INTERCOM INDICATOR OFF KEY LINE KEYS LINE INDICATORS PHONE CORD JACKS TEL.LINE 9V DC L1
Resumen del contenido incluido en la página 18
BASE UNIT FEATURES BASE LED INDICATORS LINE 2. Flashes rapidly when LINE 2 is placed POWER LED on HOLD. Glows when the AC adaptor is supplying power to the Base Unit. Flashes in cadence with the incoming ring when you receive a call. CHARGE LED LINE 1 KEY Glows when the Handset is placed in Press this key to access or FLASH the Base Unit cradle to charge. LINE 1. SPARE CHARGE LED During CONFERENCE mode, pressing Glows when the (optional) battery pack this key will maintain access to LINE 1 is i
Resumen del contenido incluido en la página 19
BASE UNIT FEATURES CONFERENCE (CONF) KEY RINGER ON/OFF SWITCHES Press this key to conference LINE 1 and Located on the right edge of the Base LINE 2. Unit (antenna side), these switches control the Base Unit ringer for each line. HOLD KEY These switches have no effect on the Press this key to place your call on Handset ringers. HOLD. Press the appropriate LINE key to TONE/PULSE SWITCH cancel HOLD. Located on the underside of the Base Unit, set this switch to the dialing mode In CONFERENCE mode,
Resumen del contenido incluido en la página 20
GETTING STARTED Setting up your VTech VT 2910c NOTE: Connect power to the Base Unit before placing the Handset into the 1. Choose an area near an electrical cradle. outlet and telephone wall jack(s). 2. Plug the AC power adaptor into the 6. Connect the telephone line cords: electrical outlet and the DC connector to the back of the Base If you have 2 telephone lines Unit. installed on a single jack (type RJ- TELEPHONE 14), use the 2-line cord provided. This WALL JACK is a 4 wire cord with a bla
