Resumen del contenido incluido en la página 1
Table of contents
To turn off the TV automatic(off time) 18
Safeguards 2
Colour Television
Sleep time setting 19
INTRODUCTION
To select the screen color 20
Features 3
To select demo 20
Installation 3
To select the auto volume control 21
INSTRUCTION MANUAL To connect the aerial 4
To select channel lock 21
To prepare the remote control 4
To select child lock 21
Identification of controls 5
PF32W503 Watching picture in picture 22
Remote control 7
To watch a TV or an external source as a sub-pictur
Resumen del contenido incluido en la página 2
INTRODUCTION SAFEGUARDS FEATURES To operate your receiver at the peak performance, please read this Instruction Manual carefully and retain it for the Double Window future reference. You can enjoy two programs simultaneously by splitting the screen in two. M Water and Moisture : Never install the set in the following places : in the bathroom, in a wet basement(Dripping or splashing water). 16:9 screen You can select a desired 4:3 screen mode as well as the 16:9 picture mode. M Heat : Never
Resumen del contenido incluido en la página 3
INSTALLATION IDENTIFICATION OF CONTROLS The following describes the name of each part of the TV and remote control. * To connect the aerial Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and positioning of the aerial will depend upon your particular area. FRONT Infrared sensor POWER indicator Main power switch ON TIMER indicator Notes ON/OFF POWER TIMER M When using an outdoor aerial, disconnect the leads of the ind
Resumen del contenido incluido en la página 4
REMOTE CONTROL TV VIDEO DVD / / INPUT SELECT POWER ON OFF / TOP TEXT RECALL PR SELECT 0~9 (PAGE SELECTOR 0~9) STANDBY/ON CH VOL MENU TV/AV SLEEP TIME SELECT SELECTABLE PICTURE CHANNEL LOCK SELECTABLE SOUND Under this button pressed once, TV WIDE ZOOM SELECT / goes to the state of STAND BY. SYSTEM MENU SOUND EFFECT STEREO BILINGUAL / PR UP(PAGE UP) SELECT VOLUME UP VOLUME DOWN BACK SOUND MUTE PR DOWN(PAGE DOWN) A/V OUTPUT TERMINAL This always provides with TV signal output of the selected channel
Resumen del contenido incluido en la página 5
TURNING THE POWER ON OFF TUNING THE TV CHANNELS / MThe following describes how to turn the TV on off using the main switch and the remote control. / Turning the power on/off Auto setup system AUTO SETUP SYSTEM TURNING THE POWER ON OFF / The following describes how to turn the TV on off using the main / 1. Press the MENU button to select switch and the remote control. to INSTALL. < To turn the power on/off > 2. Press the C B buttons and then / 1. Press the main power switch. INSTALL SYSTEM. The p
Resumen del contenido incluido en la página 6
CONVENIENT PICTURE CONTROL M You can select the picture quality instantly. EDIT 1. Press the menu button to select INSTALL. 2. Press the C B buttons and then / INSTALL SYSTEM. TO SELECT THE PICTURE MODE 1.Press the SELECTABLE PICTURE NORMAL STEREO ( ) button at remote control to select 3. Select EDIT with the PR yx / the desired picture quality. buttons and press the C B / buttons to start EDIT. Normal, Mild and Favourite can be selected cyclically. 2.Or press the MENU button to select th
Resumen del contenido incluido en la página 7
ENJOYING PANORAMA AND ZOOM PICTURE CONVENIENT SOUND CONTROL M M You can enjoy PANORAMA picture and ZOOM 1~ZOOM 4 picture with TV. You can select and adjust the sound quality as you like. In addition to regular wide/zoom screen mode. TO SELECT THE PANORAMA OR ZOOM 1~ZOOM 4 SCREEN TO VOLUME CONTROL 1. By pressing the WIDE/ZOOM button in remote control, the following Adjust the volume with the volume Down/Up button on the upper of seven modes change cyclically. the set, or with the C/B buttons on t
Resumen del contenido incluido en la página 8
TO SELECT THE SOUND MODE TO ADJUST THE SOUND BALANCE Press the MENU button to select the 1. Press the SELECTABLE SOUND ( ) SOUND and then to be displayed on button to select the desired sound quality. right appearance. NORMAL, FAVOURITE, MUSIC, SPEECH Select the BALANCE with the can be selected cyclically. PRyx buttons. / Adjust the BALANCE with the C/B 2. Or press the MENU button to buttons. select the SOUND and then to be Press C button to decrease the right displayed on th
Resumen del contenido incluido en la página 9
ENJOYING STEREO AND BILINGUAL BROADCASTS USING OTHER MENUS M The unit receivers both stereo and bilingual broadcasts transmitted in either the NICAM or German stereo/bilingual broadcasts system. STEREO PROGRAMS TO SET CLOCK Press the STEREO/BILINGUAL SELECT 1.Press the MENU button to select the FEATURES and then to be ( )button to select to nicam- displayed on the right stereo/mono mode. appearance. BILINGUAL PROGRAMS 1.When a bilingual program is received 2. Select t
Resumen del contenido incluido en la página 10
TO TURN ON THE TV AUTOMATICALLY(WAKE TIME) SLEEP TIME SETTING With the CLOCK, the WAKE TIME, 1. When this button, up to 2 hours the WAKE PR. every 20 minutes can be set to Preset, the TV will automatically turn the sleep timer. on to a preset program number at a reset time. Set the timer ON. Select the WAKE TIME with 2.If you press the SLEEP button for the first time, SLEEP 0 sign of PRyx buttons. the non set sleep-timer appears on the upper left side of the / Then, press dire
Resumen del contenido incluido en la página 11
TO SELECT THE SCREEN COLOR TO SELECT THE AUTO VOLUME CONTROL Different sound source (eg. When no signal is being received, Advertisement during movies) fairly the TV will automatically turn blue often do not have the same volume or red at the time SCREEN BLUE or level. SCREEN RED on. In the case, you can equalize the volume with the AVC(auto volume 1. Press the MENU button to select control) ON. the FEATURES and then to be displayed on the right appearance. 1.Press the MENU button to se
Resumen del contenido incluido en la página 12
WATCHING PICTURE IN PICTURE The unit is capable of displaying two picture with the small sub picture TO WATCH A TV OR AN EXTERNAL SOURCE AS A SUB-PICTURE simultaneously. This is called the Picture-In-Picture function. A TV picture or a picture 1. Select the desired program. from external source equipment such as a VTR can be displayed as another picture. 2.Press the PIP button to display a sub-picture. SUB-PICTURE 3.Press the sub TV VIDEO button repeatedly to select the input for / the sub pictu
Resumen del contenido incluido en la página 13
CONNECTING OTHER MACHINES LIKE VIDEO M When connecting other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. TO SWITCH THE MAIN AND SUB-PICTURE OF THE PIP Press the SWAP button when a picture-in-picture is displayed. AUDIO SET CAMCORDER The main picture(the large picture) and sub-picture(the small picture) are switched. Press the SWAP button again to switch again. GAME PLAYER TO FREEZE THE SUB-PICTURE Press the STILL button when a sub-picture is dis
Resumen del contenido incluido en la página 14
CONNECTING VIDEO CONNECTING AT AV2(SCART) M When connecting other equipment, please ensure you turn the main switch OFF to prevent any M When connecting other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. damage to the equipment. L L When connecting the VIDEO to the back of the TV Connecting to a HI-FI STEREO VIDEO(STEREO mode is defaulted) 1. Prepare the connective plug for picture/sound. 1. Prepare the connective plug for picture sound. / 2. Conn
Resumen del contenido incluido en la página 15
L CONNECTING WITH VIDEO CAMERA(CAMCORDER) Connecting SCART to SCART(STEREO mode is defaulted) 1. Prepare the connective plug for picture sound. / 2. Connect the SCART input/output terminal of VIDEO with the SCART input/output terminal of TV. M When connecting other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. (2) REAR SCART TERMINAL L To connect VIDEO CAMERA with the TV M When watching a recording by VIDEO CAMERA, it’s convenient to connect with t
Resumen del contenido incluido en la página 16
CONNECTING DVD PLAYER CONNECTING WITH AUDIO SET M When connecting other equipment, please ensure you turn the main switch OFF to prevent any M When connecting other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. damage to the equipment. MWhen connecting the DVD player. MWhen listening to sound in powerful AUDIO, while watching the picture on TV. MConnect external input terminal of AUDIO to right & left sound output of TV signal. 1. Prepare the conne
Resumen del contenido incluido en la página 17
VIEWING TELETEXT(OPTION) / USE OF THE TELETEXT BUTTONS M The teletext service is carried on a TV transmission signal, therefore it is only available when a TV program can be received on your TV. Your choice of TV program also governs which Teletext service you will receive. TO SELECT THE TEXT MODE REVEAL First, turn on your TV SET and choose your TV program. Some Teletext pages play a role in concealing part of the display in, Then press the TEXT( )button to switch the receiver
Resumen del contenido incluido en la página 18
SPECIFICATION NEC Service Centres MODEL PF32W503 TV Standard Color system PAL SECAM, NTSC 3.58 4.43(AV) / / NEC Australia Pty. Ltd. Sound system B G, D K, I, H / / ABN 86 001 217 527 Rated voltage 110-240V~, 50 60Hz / Home Electronics Group Power consumption 148W Sound Output Power 8W X 8W NEC Service centres PH: 131-632 HYPER BAND CATV Channel Coverage VHF L : E2(48.25MHz)~S6(147.25MHz) VHF H : S7(147.25MHz)~S36(423.25MHz) NEW South Wales UHF : S37(431.25MHz)~E69(855.25MHz) Sydney
