Manual de instrucciones de Rolls CABLE SCANNER CS1000

Resumen del contenido incluido en la página 1

LIMITED WARRANTY
This product is warranted to the original consumer purchaser to be free from
defects in materials and workmanship under normal installation, use and service for a
period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
The obligation of Rolls Corporation under this warranty shall be limited to repair
or replacement (at our option), during the warranty period of any part which proves
CS1000
defective in material or workmanship under normal installati

Resumen del contenido incluido en la página 2

INTRODUCTION SPECIFICATIONS Thank you for your purchase of the Rolls CS1000 Cable Scanner. In addition to testing Scan rate: 300mS per LED ten different cable ends, it has a variable level 1 kHz Tone Generator for testing audio Test Tone frequency: 1 kHz equipment, and a Phantom Power voltage and phase tester. This device was designed Test Tone level: -30 dB to + 7 dB balanced with the audio professional in mind. Please take a moment and review this manual as it Tone output impedance; 100 Ohms u

Resumen del contenido incluido en la página 3

SCHEMATIC DESCRIPTION RIGHT PANEL The right hand side of the CS1000 contains the cable scanning SEND jacks. If you are connecting a cable with an unmatched amount of pins or electronic connections, plug the end with the MAXIMUM connections to this side. The XLR jacks on this side are also used for the Phantom Power VOLTAGE test. This side contains the following jacks: 1/4”, Speak-on®, RCA, XLR Female, 1/8”, XLR Male, 7- Pin MIDI, RJ11, and RJ45. LEFT PANEL The left hand side of the CS1000 contai

Resumen del contenido incluido en la página 4

CABLE SCANNING 1 KHZ TONE GENERATOR OPERATION Testing Audio cables When troubleshooting an audio system, having a test tone is imperative. The The most common (but certainly not all) types of professional audio cables are: CS1000 has the connectors available for virtually every audio system in use. Thus Speaker cables, instrument cables, microphone cables, cassette, cd, and vcr/dvd most any audio device can be connected to the CS1000 for signal verification and player cables, headphone/earphone