Resumen del contenido incluido en la página 1
SCS.1m
Mixer Control Surface/Audio Interface
USER MANUAL
Resumen del contenido incluido en la página 2
Important Safety Instructions • Read and follow the provided instructions before operating this unit. • Adhere to all warnings and security advices, and retain this document for future reference. Installation: Install the unit in accordance with the provided instructions Power Supply: • The unit should be connected to a power supply outlet only of the voltage and frequency marked on its rear panel. • The power supply cord should be routed so that it is not likely to be walked on
Resumen del contenido incluido en la página 3
Contents 1. Introduction …………………………………………………………………………………………………………………………………….… 1 1.1. Welcome to the SCS.1m …………………………………………………………………………………………………………….……. 1 1.2. Overview ……………………………………………………………………………………………………………………………….……...... 2 1.3 Unpacking ……………………………………………………………………………………………………………………………….………. 2 2. Connecting the SCS.1m ……………………………………………………………………………………………………………………... 3 2.1 Connecting to Your Computer ……………………………………………………………………………………………….………… 3 2.2 Connecting to Audio Components ………
Resumen del contenido incluido en la página 4
1. Introduction 1.1 Welcome to the SCS.1m! Thank you for purchasing SCS.1m! The SCS.1m (Stanton Control System 1 mixer) is the premier mixer control surface/audio interface for laptop DJs, remixers, VJs, and producers. Before we begin, there are a few important issues we would like to bring to your attention. There is a software component to this hardware. It is called DaRouter. DaRouter is a kind of “MIDI processor” that allows the use of presets. These presets can be application
Resumen del contenido incluido en la página 5
1.2 Overview Designed in an intuitive DJ mixer, the SCS.1m features four channel strips with faders, assignable encoder section, EQ controls, high-precision metering, a responsive crossfader, a straightforward Cue/Monitoring section, a unique footswitch input, and much more… The SCS.1m and the SCS.1d (deck) are the main components of the SC System 1; the first truly professional DJ control system. You can use the SCS.1m as standalone or in conjunction with the SCS.1d, not only to expand y
Resumen del contenido incluido en la página 6
2. Connecting the SCS.1m 2.1 Connecting to Your Computer Step 1: Locate the included power cable and adapter (12V) and connect it to the SCS.1m and to your power source. (Figure 2.1) Note If you own both the SCS.1m and the SCS.1d, the power adapters look very similar. Looking at the output voltage will tell you which is for which component, (e.g., 12V for the SCS.1m, and 24V for the SCS.1d). There is also a label on each of the power cords to specify which product they are to be u
Resumen del contenido incluido en la página 7
2.2 Connecting to Audio Components Figure 2.4 4
Resumen del contenido incluido en la página 8
2.3 Connecting to the SCS.1d All of the SCS.1 controllers have two FireWire ports on them, so devices can be chained together if needed. So when connecting a single SCS.1d to the SCS.1m, you would go from the unused FireWire port on the SCS.1m (Figure 2.5), (the other port is connected to your computer) to an open port on the SCS.1d. (Figure 2.6) Figure 2.5 Figure 2.6 Likewise, if you’re connecting two SCS.1ds to a SCS.1m, then you would g
Resumen del contenido incluido en la página 9
3. SCS.1m Description In this chapter, we will briefly describe the Top, Front, and Back SCS.1m panels. It’s important to understand that the SCS.1m is a traditional DJ mixer “analogy” in a control surface. This means that while the SCS.1m looks like a DJ mixer, at its core, it is really a control surface. As a control surface, the SCS.1m’s functionality is completely derived from the host application (software) that it is controlling. The SCS.1m also utilizes presets in DaRouter to d
Resumen del contenido incluido en la página 10
Top Panel Functional Groups (continuation) Figure 3.1 Now, let’s take a closer look of each of the functional groups. 7
Resumen del contenido incluido en la página 11
3.1.1 Channel Strip The button at the top of the strip might be mapped to functionalities like deck or channel focus, a shift modifier, etc. Five rotary encoders in the top section of the channel strip can be mapped to traditional mixer functions like gain, EQ, and panning. (Figure 3.2) The A and B buttons in the lower section of the strip can be used to toggle modifiers, assign the strip to the crossfader, etc. The CHANNEL FADER would usually be mapped to deck or channel volume.
Resumen del contenido incluido en la página 12
3.1.3 Crossfader Section The CROSSFADER is traditionally used to fade between songs playing in different channels. (Figure 3.4) You might also consider mapping the CROSSFADER to non-traditional functionalities, like effects parameters, filters, or setting selections (like scrolling through effects). Figure 3.4 3.1.4 Master Section The Master Section controls various SCS.1m outputs. (Figure 3.5) The ZONE knob is meant to be mapped to an Aux out, like a
Resumen del contenido incluido en la página 13
3.1.5 Browser Section This area of the SCS.1m would typically be mapped to browser-type functionality, whether that is scrolling through your library in Traktor, or selecting scenes in Ableton Live. (Figure 3.6) The three buttons at the top of the section can be used to select and activate banks or directory trees. The large push encoder can be used to scroll through and select songs, scenes, or directory trees. It would also allow the user to scrub through songs and/or cue them.
Resumen del contenido incluido en la página 14
3.2 Front Panel In this panel, you will be able to connect your headphones. Stanton has included a headphone extender cable as the headphone jack is recessed into the panel to prevent accidentally damaging the headphone jack. Stanton has designed the headphone output to be extremely powerful and loud; it is important to remember that you must control the level of this output in your host application or assign it to the headphone knob on the front panel for volume control. ALWAYS have th
Resumen del contenido incluido en la página 15
3.3 Rear Panel In 2.2 “Connecting to audio components,” we gave you an iconic representation of what could be connected to the SCS.1m. Here, we will briefly describe the Rear panel. (Figure 3.8) Figure 3.8 1. Power Switch: Turns the SCS.1m ON or OFF. 2. DC IN: Input connection for the included power supply. While the power is switched OFF, plug the power supply into the mixer first, and then plug it into the outlet. 3. FireWire Jacks: Sends audio and MIDI to and from
Resumen del contenido incluido en la página 16
4. SCS.1m Software Installation To fully maximize SCS.1m capabilities and take advantage of its great features, some software needs to be installed with it. In fact, the SCS.1m Software Installation process differs greatly between Mac and PC computers. - On a Mac, the SCS.1m is Core Audio compliant, which means that the OS will recognize the SCS.1m without needing to install a driver. However, on a Mac you will need to install DaRouter for proper MIDI functionality. - In Windows, an
Resumen del contenido incluido en la página 17
4.1 Windows XP 1. Double click the executable file (.exe). If the following Open File- Security Warning appears, click Run. (Figure 4.1) Figure 4.1 2. The Stanton SCS.1 DaRouter Setup Wizard will guide you through the installation process. Click Next. (Figure 4.2) Figure 4.2 14
Resumen del contenido incluido en la página 18
3. To install the software for the first time, choose the Standard option. To update your previously installed version, choose Custom. In this example, let’s choose Standard. (Figure 4.3) Figure 4.3 4. Read the License Agreement, select the “I accept the agreement” option, and then click Next. (Figure 4.4) Figure 4.4 15
Resumen del contenido incluido en la página 19
5. The installation of the ASIO driver will begin. Make sure that your SCS.1 controller(s) are properly connected but do not turn them ON yet. When you are ready, click Next. (Figure 4.5) Figure 4.5 6. In this step, you are able to choose where to install the driver. However, if you do not really need to change the location, leave the default setting and click Install. (Figure 4.6) Figure 4.6 16
Resumen del contenido incluido en la página 20
7. Turn your SCS.1 controllers ON and click OK. (Figure 4.7) Figure 4.7 8. Wait for a few seconds, normal operation will resume shortly. (Figure 4.8) Figure 4.8 17
