Resumen del contenido incluido en la página 1
INSTRUCTION MANUAL
DISHWASHER
Resumen del contenido incluido en la página 2
Contents 1. Safety and operating instructions __________________________ 26 2. Installation and hook-up _________________________________ 28 2.1 Water supply connection _____________________________________________________ 28 2.2 Electrical connection ________________________________________________________ 29 3. Description of the controls _______________________________ 30 3.1 Front panel________________________________________________________________ 30 3.2 Information display________________
Resumen del contenido incluido en la página 3
Safety instructions 1. Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND COMPLIES WITH THE EEC DIRECTIVES 72/23, 897336 (INCLUDING 92/31) CURRENTLY IN FORCE, INC
Resumen del contenido incluido en la página 4
Safety instructions DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING TRANSIT! IF IN DOUBT, CONSULT YOUR DEALER. THE APPLIANCE MUST BE INSTALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN. THE APPLIANCE IS INTENDED FOR USE BY ADULTS. DO NOT ALLOW CHILDREN TO COME NEAR OR PLAY WITH THE DISHWASHER. KEEP CHILDREN AWAY FROM DETERGENTS AND FROM THE OPEN DISHWASHER DOOR. THE PACKAGING MATERIALS (PLASTIC BAGS, POLYSTYRENE, METAL BARS,
Resumen del contenido incluido en la página 5
Installation instructions 2. Installation and hook-up Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw t
Resumen del contenido incluido en la página 6
Installation instructions DRAIN CONNECTION Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm, or alternatively, place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose. It is important to prevent the hose from coming loose and falling. For this purpose, the plastic support is equipped with a hole for tying it to the wall or water tap. The free end should be positioned at a height of between 3
Resumen del contenido incluido en la página 7
User instructions 3. Description of the controls 3.1 Front panel All the dishwasher's controls and indicators are located on the front panel, with layout varying depending on the models. Check whether your panel is Type "A" or "B" and then identify the control and monitoring devices in the key below. TYPE "A"TYPE "B" 1 WASHING PROGRAM SELECTOR 2 ON / OFF AND DELAYED START SELECTOR 3 ON / OFF BUTTON 4 POWER ON LIGHT 5 START/STOP BUTTON 6 ½ LOAD WASH BUTTON 7 ECO DRYING CYCLE BUTTON (certain model
Resumen del contenido incluido en la página 8
POWER SWITCH-ON TABLE FOR CERTIFICATION BODIES Reference standard EN 50242 TYPE "A"TYPE "B" Reference program (*) Selector on P6 + ECO DRYING Load 12 place-settings Type of detergent B Amount of detergent 30 g Rinse aid setting Depending on the model 3/4 or 4/6 EN 50242 STANDARD LOADS T "A" Turn the ON/OFF switch (2) to the letter I. YPE T "B" Press the ON/OFF key (3). YPE The ON light (4) illuminates. LOWER BASKET UPPER BASKET STARTING THE DISHWASHER After correctly carrying out all the pre
Resumen del contenido incluido en la página 9
TABLE OF PROGRAMS SETTING THE WASHING PROGRAM To select the most suitable washing program, refer to the table below which indicates the recommended washing according to dish type and TYPE "A"TYPE "B" the degree of soiling. Once the most suitable washing program has been selected using the table provided, turn the WASHING PROGRAM SELECTOR (1) to set the program required, placing it against the identification symbol or nummer. PROGRAM SEQUENCE DURATION CONSUMPTION DISHE TYPE EC O PROGRAM INFORMAT
Resumen del contenido incluido en la página 10
User instructions DISABLING THE END OF CYCLE ACOUSTIC DEVICE It is possible to disable the sounding of the start/end of cycle acoustic device. Proceed as follows: • press down the HALF LOAD (6) button for a few seconds until the symbol bS appears on the INFORMATION DISPLAY (8); • press the HALF LOAD (6) button again to disable the acoustic device (the symbol bN appears on the display); • press the START/STOP (5) button twice to exit the set-up mode. To re-enable the acoustic device repeat the fo
Resumen del contenido incluido en la página 11
User instructions CANCELLING THE CURRENT PROGRAM To cancel the currently selected program, press the START/STOP (5) button for a few seconds, until the active program appears on the INFORMATION DISPLAY (8). At this point, to halt the program in progress simultaneously press the HALF LOAD (6) button and the START/STOP (5) button. The INFORMATION DISPLAY (8) will show the letter P followed by a dash (P-) and the dishwasher will automatically advance to the end of cycle. CHANGING THE PROGRAM To cha
Resumen del contenido incluido en la página 12
User instructions TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT • Always try to run the dishwasher fully loaded. • Do not wash the dishes in running water. • Use the washing program that is most appropriate for each type of load. • Do not carry out any preliminary rinsing. • If available, connect the dishwasher to a hot water supply up to 60°C. • When possible, disable the drying cycle and leave the door open at the end of the washing cycle: the residual air and heat will dry the dishes perfe
Resumen del contenido incluido en la página 13
User instructions 4. Operating instructions Once the dishwasher has been correctly installed, prepare for use as follows: • Adjust the water softening system; • Add the regenerating salt; • Add the rinse aid and detergent. 4.1 Using the water softening system The amount of scale contained in the water (water hardness index) can cause whitish staining on the dry dishes, which tend to become dull over time. The dishwasher is equipped with an automatic softening system which uses a special regenera
Resumen del contenido incluido en la página 14
User instructions ADJUSTING THE WATER SOFTENING SYSTEM The dishwasher is equipped with an electronic device for adjusting the water softening setting according to the hardness of the water. To adjust the water softening setting, proceed as follows: TYPE "A"TYPE "B" • Press down the HALF LOAD (6) button for a few seconds until the bS symbol appears on the INFORMATION DISPLAY (8). • Press the START/STOP (5) button to access the water softening settings (the current setting appears on the informat
Resumen del contenido incluido en la página 15
User instructions 4.2 Using the rinse aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right. With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required. ADDING THE RINSE AID The rinse aid helps the d
Resumen del contenido incluido en la página 16
User instructions ADDING THE DETERGENT To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully. During the washing cycle, the dispenser will be opened automatically. • When a SUPER program is selected, in addition to the normal dose of detergent, it is necessary to add an additional amount inside compartment G or H. • Use only detergents specially formulated for dishwashers. For optimal washing results it is important to use a good q
Resumen del contenido incluido en la página 17
User instructions 4.3 General warnings and recommendations Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be washed and their loading. There are generally no constraints on the washing of domestic dishes, but in certain cases it is necessary to take their characteristics into account. Before loading the dishes into the baskets it is necessary to: • remove coarse food remains: e.g. bones, fish-bones, etc. which may cl
Resumen del contenido incluido en la página 18
User instructions 4.4 Using the baskets The dishwasher has a capacity of 12 place-settings, including serving dishes. LOWER BASKET The lower basket receives the full force of the lower spray arm, and should therefore be used for the “toughest” items with a heavier degree of soiling. All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom. With fixed supports To make full
Resumen del contenido incluido en la página 19
User instructions CUTLERY BASKET This varies in shape according to the model and features either a single compartment or separate compartments. The cutlery should be arranged in an orderly manner inside the basket, with the handles pointing downwards. Take care during loading to avoid injury from the knife blades. The basket is suitable for all types of cutlery, except those long enough to interfere with the upper spray arm. Ladles, wooden spoons and cooking knives can be placed in the upper bas
Resumen del contenido incluido en la página 20
User instructions ADJUSTING THE UPPER BASKET The upper basket can be adjusted in two positions, according to the user’s needs and according to the height of the dishes in the lower basket. Proceed as follows Pull-out version: • pull out the right-hand basket guide; • remove the stop, first releasing it as shown in the diagram; • push the guide to free the wheels; • fit the upper or lower pair of wheels into the guide, depending on the setting required; • return the stop to its original position.
