Manual de instrucciones de Audiovox 5BCR

Resumen del contenido incluido en la página 1

Model 5BCR&5BCR03
Programming Guide
Your Alarm and or Remote Start unit has a configurable receiver that
allows the transmitter to be programmed to operate the Lock Unlock
functions with one transmitter button or with two transmitter buttons
(separate Lock/Unlock). In addition, the receiver also allows driver priority
function. This driver priority function takes place when ever a particular
transmitter is used to unlock the vehicle regardless of the selection of one
button or two button ope

Resumen del contenido incluido en la página 2

THIS PAGE LEFT BLANK INTENTIONALLY 2 128-6799 2 of 8

Resumen del contenido incluido en la página 3

(Siren emits 1 short chirp indicating channel 1 has been entered) 3. Within 10 Seconds, Press and hold the button of the first transmitter you wish to control the Lock&Arm feature of your security system until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Lock/Arm feature). 4. Within 10 seconds, press and release the valet program switch one time. (Siren emits 2 short chirps indicating channel 2 has been entered) 5. Within 10 Seconds, Press and h

Resumen del contenido incluido en la página 4

(Siren emits 6 short chirps indicating channel 6 has been entered) 13. Within 10 Seconds, Press and hold the unlock button, (or any unused button(s)), of the first transmitter you wish to control Channel 6 output, (Driver Priority 1) until a long chirp is heard from the siren. (Repeat this for each transmitter you wish to operate the Channel 6 output, Driver Priority 1) 14. Within 10 seconds, press and release the valet program switch one time. (Siren emits 7 short chirps indicating channel 7 ha

Resumen del contenido incluido en la página 5

REPRIORITIZING A TRANSMITTER’S PROGRAMMING: To reprogram a receiver channel with a different transmitter button once a code has been stored, there will be two options: 1. Enter the transmitter program mode of the receiver channel to be reprogrammed. Using any unused button or combination of buttons, push out the stored code by pressing the unused button until a long chirp is heard, then repeat 3 additional times. After this, you can add any desired unused transmitter button. This action eras

Resumen del contenido incluido en la página 6

To replace the transmitter battery: 1. Slide back the lock tab on the back side of the transmitter case in the direction shown. 2. Slide back the battery case cover in the direction shown. 3. Remove the discharged battery, making note of the location of the + and - contacts shown, and replace with a new type akaline 1.5 volt AAA Battery. 4. Making note of the location of the (+) and (-) contacts, insert a new AAA battery alkaline 1.5 volt. 5. Replace battery cover being certain to close the ba

Resumen del contenido incluido en la página 7

ORDER FORM FOR TRANSCEIVERS 5BCR & 5BCR03 Attention: Transmitter Ordering Department Important: To help us expedite your order, please print all of the information legibly and mail this form and your payment according to the instructions below. Be certain to specify MODEL NUMBER of your transceiver___________ 1) Name:___________________________________________ 2) Address:_________________________________________ 3) City:________________State:________Zip Code:__________ 4 Telephone Number:( )___

Resumen del contenido incluido en la página 8

© 2003 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788 128-6799 8 128-6799 8 of 8