Resumen del contenido incluido en la página 1
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 1
R
Automotive Security
Owner’s
Manual
Model: PLUS-4900
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference; and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipm
Resumen del contenido incluido en la página 2
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 2 Congratulations on your purchase of a quality Carbine automotive security system. Carbine security products are technologically superior and have been designed to provide you with years of trouble free operation. The information enclosed will provide a ready reference of the operation and maintenance of your new Carbine security system. Please take a moment to read through this manual fully before use. Contents Transmitter Operation . . . . . . . . . .
Resumen del contenido incluido en la página 3
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 3 Transmitter Operation Transmitter Button System Function Remark Press and Release Lock Doors & Arms System Arm and Delete the Internal Shock Press Twice within 3 Seconds - Sensor and Optional External Sensor Arm System with - Press within 3 Seconds Hidden Alarm Function System Must be Armed for 30 Car Locator seconds or longer Panic Function Press and Hold for 3 seconds. + Silent Arming/Disarming Ignition in “OFF” Position Ignition in “ON” Position, + A
Resumen del contenido incluido en la página 4
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 4 LED Indicator LED Function OFF System is Disarmed Slow Flashing System is Armed Fast Flashing System in Automatic Arming 1 Flash Every 5 Seconds System in Valet Mode (When Ignition Key Off) 2 Flashes - Pause Zone 2, Trigger on Trunk/Hook 3 Flashes - Pause Zone 3, Trigger on Door Switch 4 Flashes - Pause Zone 4, Trigger on Shock Sensor 5 Flashes - Pause Zone 5, Trigger on Ignition Switch Parking Light Indicators Flash Function 1 Flash System is Armed
Resumen del contenido incluido en la página 5
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 5 System Characteristics Parking Siren/Horn LED Doors Starter Dome Light Light Disabled 1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking (Option) 2 or 3 Turns on for 2. Disarming 2 or 4 Chirps Unlocking Flashes 30 Seconds Disabled 3. Trigger Alarming Flashes Slow Flash Flashes (Option) 4. Panic Alarming Flashes Flashes 5.Car Disabled Alarming Flashes Flashes Jacking (Option) 6.Car 2,3,6 Chirps 3,6 Flashes Locator Manual Lock/Arm 1. Press the button
Resumen del contenido incluido en la página 6
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 6 Automatic Arming Manual arming/disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Automatic Arming feature which allows the security system to arm 45 seconds after the last door is closed. Operation is as follows: 1. Turn the ignition to the “OFF” position and exit the vehicle. 2. After all entrances are closed, the security system LED will flash fast for 45 seconds. If you reopen a
Resumen del contenido incluido en la página 7
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 7 Disarming without a Transmitter The override procedure may be used if the remote transmitter is lost or inoperative. 1. Enter the vehicle and turn the ignition switch to “ON” position (alarm will sound). 2. Within 10 seconds push the valet switch. The alarm will stop sounding and enter disarm Mode. You can now start and operate the vehicle normally. Panic Feature The transmitter can be used as a remote panic switch to manually trigger the alarm system i
Resumen del contenido incluido en la página 8
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 8 RF Valet Mode RF valet mode provides the same functions as manual valet mode but allows you to enter and exit the valet mode using the remote transmitter. When the system is in Valet Mode, all alarm functions and remote start functions are off. However, the remote panic feature and remote door locks remain operational. To enter/exit the RF Valet Mode, repeat the following procedures. Enter Valet Mode 1. In disarmed mode, open the drivers door. 2. Push
Resumen del contenido incluido en la página 9
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 9 Progressive Remote Vehicle Locator System Note: The remote vehicle location system is active 30 seconds after the alarm is armed. 1. Press the button to active the vehicle locator system. The horn/siren will beep 2 times and the parking lights will flash 3 times. This operation will repeat a second time. 2. Press the button again within 30 seconds. The horn/siren will beep 3 times and the parking lights will flash 3 times. This operation wi
Resumen del contenido incluido en la página 10
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 10 Replacement Transmitters TRANSMITTERS DESCRIPTION MODEL # $ PRICE 1-Way Remote for the PLUS4900 Security System CA-RF49 59.95 ea. Replacement Batteries REPLACEMENT BATTERIES DESCRIPTION MODEL # $ PRICE 3 Volt Lithium Battery for the PLUS4900 CR2032 3.95 ea transmitter 9
Resumen del contenido incluido en la página 11
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 11 Replacement Parts Order Form Mail to: Magnadyne Corporation Credit Card or Money Order Only ATTN: Consumer Parts Sales (Sorry No Cash, C.O.D. or personal checks accepted) P.O. Box 5365 Call: (310) 884-7777 Fax: (310) 637-9542 Carson, CA 90749-5365 SHIP TO: (No P.O. Boxes) LAST NAME FIRST NAME INITIAL STREET ADDRESS ADDITIONAL ADDRESS ADDITIONAL ADDRESS CITY STATE ZIP CODE DAY TIME PHONE NUMBER CREDIT CARD INFORMATION VISA MC CREDIT CARD N0. EXPIRATION
Resumen del contenido incluido en la página 12
PLUS4900-UM.qxp 4/30/09 2:52 PM Page 12 Limited Lifetime Warranty Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the s
