Resumen del contenido incluido en la página 1
4 CHANNEL DVR
User Manual
SRD-450
Resumen del contenido incluido en la página 2
overview FEATURES This product enables you to record 4 channels of camera image and voice source simultaneously. This feature provides an excellent picture quality for both real time monitoring and search. • You can also monitor remote videos or search for your previous recordings and change the menu settings of the DVR via the network. • As this product can bypass the Windows operating system to implement the DVR-specific operating system on its hardware components, the overall operation is
Resumen del contenido incluido en la página 3
OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8)
Resumen del contenido incluido en la página 4
overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER CAUTION SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying th
Resumen del contenido incluido en la página 5
OVERVIEW CAUTION 1. Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°F), or high humidity. Doing so may cause fire or electric shock. 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4. Remove the power plug from the outlet when t
Resumen del contenido incluido en la página 6
overview BEFORE START This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in t
Resumen del contenido incluido en la página 7
OVERVIEW Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to ra
Resumen del contenido incluido en la página 8
overview CONTENTS 2 Features OVERVIEW 3 Important Safety Instructions 6 Before Start 2 10 Part Names and Functions (Front) 11 Part Names and Functions (Rear) 12 Remote Control 14 Connecting the Audio, Speaker, Mouse, and CONNECTING WITH OTHER DEVICE Power Cable 14 Connecting the Alarm I/O 14 15 Network Connection 17 Starting the System GETTING STARTED 17 Log On 18 Log In 17 18 Log Off 18 Power Off 19 Live Screen Configuration LIVE 20 View the Launcher Menu 21 Display 19 21 Record 22 Playback 22
Resumen del contenido incluido en la página 9
OVERVIEW 49 Backup BACKUP 49 51 Search SEARCH & PLAY 51 53 Introduction WEB VIEWER 56 Live Viewer 59 Search Viewer 53 60 Search by Time 60 Search by Event 61 Setup 67 Information 68 Using the iPhone 69 Product Specification APPENDIX 71 Open Source License Report on the Product 69 English _9
Resumen del contenido incluido en la página 10
overview PART NAMES AND FUNCTIONS (FRONT) 8 7 6 POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER DISPLAY SEARCH MENU 1 2 3 4 5 Part Names Functions Power Used to turn on or off the system. Each time you press in Live mode, the screen will be switched in the sequence of 4-split, Single DISPLAY b and Auto Sequence in order. SERACH Goes to the search screen. c MENU Goes to the system menu screen. Direction ▲▼◄► : Used to select a system menu item. : Selects and runs a menu item. Enter This
Resumen del contenido incluido en la página 11
OVERVIEW PART NAMES AND FUNCTIONS (REAR) 1 2 3 4 5 6 7 8 Part Names Functions DC Input (DC12V) Power connection port for 12V/4A adaptor NETWORK RJ-45 port for network connection. b Supports USB 2.0 protocol that enables you to back up the video signal stored in the HDD USB using an external memory device and to connect USB memory. VIDEO IN Composite video signal input port (BNC type port). c VIDEO OUT Composite video signal output port (BNC type port). AUDIO IN Audio signal input port (RCA
Resumen del contenido incluido en la página 12
overview REMOTE CONTROL DVR Available after switching to DVR mode by pressing the [DVR] button on the remote control. SEARCH BACKUP Switches to search mode for video search. Switches to backup mode. At the moment, you should select an authorized user and enter the password. DVR Activates the DVR function. MODE Changes the display mode. POWER Turns on/off or logout the system. Channel If you press a channel number in real time monitoring or search mode, the camera’s input of the selected ID c
Resumen del contenido incluido en la página 13
OVERVIEW Changing Remote Control ID In a multi-DVR system using a single remote control, you can control only the DVR that matches the ID that you have set using the ID button. 1. Press the [ID] button to check the ID of each of "REMOCON ID" and "SYSTEM ID". The defaults are 00 for the System ID and 00 for the Remote ID, respectively. 2. To change the Remote ID of the IR REMOTE CONTROLLER, press and hold the [ID] button while entering a desired combination of two digits from 00 to 99. 3. To
Resumen del contenido incluido en la página 14
connecting with other device CONNECTING THE AUDIO, SPEAKER, MOUSE, AND POWER CABLE Network CONNECTING THE ALARM I/O Connecting the alarm Input signal Connection port for the alarm input signal. Connect one strand of the sensor signal line (two strands) to the alarm input port and connect the other to the [G] port. Connecting the alarm output signal Connection port for the alarm output signal. • NO (Normal Open) : Sensor is open in normal condition, it generates alarm if the sensor is closed.
Resumen del contenido incluido en la página 15
CONNECTING WITH OTHER DEVICE NETWORK CONNECTION Local System Confi guration Use the router or hub in the same local network to connect to the DVR and local PC where you can control the remote DVR or check the recording data in the DVR. IP Router or HUB POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER DISPLAY SEARCH MENU DVR Local PC #1 Local PC #2 1. Connect the network port on the rear DVR panel to the router or hub. 2. Connect the network port on the local PC to the router or hub. 3. Enter “IP
Resumen del contenido incluido en la página 16
connecting with other device Total System Confi guration You can use the 10/100 Mbps Ethernet connector on the product to connect to the network. Connecting to the network enables you to perform various functions including remote monitoring, remote search and remote control. IP Router or HUB Cable/ADSL Modem INTERNET or DDNS Server Direct LAN (Fixed/Static IP) (websamsung.net) POWER ALARM REC NETWORK POWER ALARM REC NETWORK DIGITAL VIDEO RECORDER DIGITAL VIDEO RECORDER DISPLAY SEARCH MENU DISPLA
Resumen del contenido incluido en la página 17
GETTING STARTED getting started STARTING THE SYSTEM 1. Connect the power cable of the DVR to the wall outlet. 2. You will see the initialization screen. LOG ON To make use of the DVR, you must log on after the system started. You must log on before you can use the features of the DVR. 1. Select a user account that you want to log on with. 2. Enter the password. LOG ON The default user is “admin” and password is “4321”. USER ID admin PASSWORD . @ # $ % & * ( ) 1 2 3 4 5 6 7 8 9 0 A B C D E F G
Resumen del contenido incluido en la página 18
getting started LOG IN To access menu items of Logout, System Setup, Record Setup, Backup and Search, you must have logged in. 1. If you try to access restricted menus, the login dialog pops up. LOG IN 2. Select a user account, enter the password and press the USER ID admin PASSWORD button. . @ # $ % & * ( ) 1 2 3 4 5 6 7 8 9 0 The default user is “admin” and password is “4321”. A B C D E F G H I J K L M N O P Q R / S T U V W X Y Z _ a The user who has a limited access to the men
Resumen del contenido incluido en la página 19
LIVE live LIVE SCREEN CONFIGURATION Icons on the Live Screen b ow MENU BACKUP SEARCH DISP REC c Name Description Camera Name Displays the name of the camera. C C : Indicates continuous recording. A A : Indicates alarm recording. Recording Modes b M M : Indicates motion detection recording. II : Indicates instant recording. Launcher Menu Displays the current time, menu and status. c English _19
Resumen del contenido incluido en la página 20
live VIEW THE LAUNCHER MENU You can use the Launcher menu appearing on the bottom of the live screen to access it. 1. On the Live screen, move the cursor or press the [MENU] button on the remote control to display the Launcher menu. 2. Use the direction buttons or the cursor to select a desired menu. You can adjust the display time of the Launcher in “DISPLAY M > OSD > STATUS BAR TIMEOUT”. (Page 30) ow MENU BACKUP SEARCH DISP REC ow MENU BACKUP SEARCH DISP REC c b Name Descripti
