Manual de instrucciones de National Instruments NI-845x Software and Hardware

Resumen del contenido incluido en la página 1

INSTALLATION GUIDE
NI-845x Software and
Hardware
This installation guide contains instructions to help you install your NI-845x
software and hardware. Complete documentation is in the NI-845x Software User
Manual, which is available on your NI-845x Software CD in Adobe Acrobat
portable document format (PDF). Refer to the NI-845x Software User
Manual.pdf file in the Documentation folder on the CD. The NI-845x software
on this CD supports Microsoft Windows operating systems.
Install the NI-8

Resumen del contenido incluido en la página 2

does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-845x Software CD. 2. The installation wizard guides you through the necessary steps to install the NI-845x software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel. 3. When installation is complete, click Finish. Install the Hardware Step 1: Unpack the Devices, Accessories, Cables Y

Resumen del contenido incluido en la página 3

Step 2: Install the Devices, Accessories, and Cables Complete the following steps to install an NI USB device: 1. Connect the USB cable from the computer USB port or from any other hub that provides USB power to the USB port on the device. The following figure shows the USB cable and its connectors. 1 2 1 Host/Hub/PC USB Port 2 NI USB Device USB Port 2. Power on your computer or PXI chassis. On some Windows systems, the Found New Hardware wizard opens with a dialog box for every device insta

Resumen del contenido incluido en la página 4

Step 3: Confirm that Your Device Is Recognized To verify that the USB device is recognized, complete the following steps: 1. Double-click the Measurement and Automation icon on the desktop to open Measurement and Automation Explorer (MAX). 2. Expand Devices and Interfaces. 3. Verify that the device appears under USB Devices. If the device does not appear, press to refresh the view in MAX. If the device is still not recognized, refer to ni.com/support/install for troubleshooting informat

Resumen del contenido incluido en la página 5

Further Documentation Additional documentation for the NI-845x software is in the NI-845x Software User Manual, which is available on the NI-845x Software CD in Adobe Acrobat 2 portable document format (PDF). The manual includes an overview of the I C and SPI buses as well as detailed information on the API. Refer to the NI-845x Software User Manual.pdf file on your CD or in the NI-845x Software\ Documentation folder on your hard drive. Additional documentation for your NI-845x interface i

Resumen del contenido incluido en la página 6

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section onni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents. © 2005–20