Resumen del contenido incluido en la página 17
Secure the Speaker Dust Cover by setting it into the grooves located on the front side of the speakers. 3 Connect the speakers to the PDP using the speaker cables. The connection terminals are on the rear side of both the PDP and the speakers. 4 (Match the color coded terminals and cables.) BLACK RED BLACK RED Note • When moving the PDP with the speakers attached, be sure to hold on to the PDP to prevent damage. (Damage may occur to the speaker connecting brackets or the speakers.) • Speak
Resumen del contenido incluido en la página 18
How to assemble the Stand-Base Firmly secure the pegs to the both sides of the Stand Base using 8 screws provided. 1 Using the 4 screws for securing the Stand Pegs and the Monitor, firmly attach the Monitor to the Stand Pegs. (The exterior of the SET may be different than the picture.) 2 Warning Firmly secure the stand for the PDP before moving it, as the stand may fall and could cause serious injury. ➤ Two or more people should carry the PDP. Never lay the PDP on the floor because of possibl
Resumen del contenido incluido en la página 19
PLASMA DISPLA Y P ANEL Connections Connecting VHF and UHF Antennas ..............................................20 Connecting Cable TV....................................................................21 Connecting a VCR........................................................................23 Connecting a Camcorder ..............................................................24 Connecting a DVD Player..............................................................25 Connecting a DTV Receiver .
Resumen del contenido incluido en la página 20
Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. Plug the antenna lead into the VHF/UHF terminal on the PDP. 1 Use the Antenna Cable, an accessory included in the product package. 20
Resumen del contenido incluido en la página 1
Owner’s Instructions
HP-P5071
This device is a Class B digital apparatus.
Resumen del contenido incluido en la página 2
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexp
Resumen del contenido incluido en la página 3
Table of Contents Listening to the Sound of the Sub(PIP) Picture ..69 General Information Selecting the Internal Mute............................70 Your New Plasma Display Panel ......................6 Remote Control Buttons ..................................8 Channel Control Wall Installation Instructions ..........................10 Fine Tuning Channels ..................................72 Installing the Speakers ................................14 LNA (Low Noise Amplifier) ....................
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
PLASMA DISPLA Y P ANEL General Information Your New Plasma Display Panel ......................................................6 Remote Control Buttons ..................................................................8 Wall Installation Instructions ..........................................................10 Installing the Speakers ..................................................................14 How to assemble the Stand-Base ....................................................18
Resumen del contenido incluido en la página 6
Your New Plasma Display Panel Front Panel TOUCH button Speakers Press to display all of the available video sources. Œ SOURCE button ˆ ENTER( ) button Press to display all of the available video sources Press to confirm a selection. (TV, AV1, AV2, AV3, S-VIDEO1, S-VIDEO2, Ø Power Indicator COMPONENT1, COMPONENT2, PC, DVI). - Power Off : Red ´ MENU button - Power On : Off Displays the main on-screen menu. - Timer On : Green ˇ VOL(+,-) button ∏ Press to increase or decrease the volume. Press to
Resumen del contenido incluido en la página 7
Side of the TV Ferrite Cores The ferrite cores are used to S-Video Input attenuate undesired signals. When connecting cables, attach one of these ferrite cores to the cable near Video Input the connector. When you connect Side AV cable to the AV3/L-AUDIO-R, first bind Audio Input (L, R) Side AV Cable round the ferrite core to secure it. Rear Panel ŒDVI INPUT (DVI-D / L-AUDIO-R) ØAV1, AV2, AV3 Connect to the digital video and audio (VIDEO / L-AUDIO-R ) output jack of a device with DVI output.
Resumen del contenido incluido en la página 8
Remote Control Buttons Remote Control ŒPOWER button Turns the PDP on and off. ´ASPECT button Press to change the screen size. ˇNumber buttons ¨+100 button Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1.” ˆMUTE button Press to mute the PDP sound. ØVOL (Volume) buttons Use it to adjust volume. ∏SLEEP button Press to select a preset time interval for automatic shutoff. ”MENU button Displays the main on-screen menu. ’ENTER button Confirms a
Resumen del contenido incluido en la página 9
¸SRS TSXT button Selects Trusurround XT mode. ˛ MTS button Press to choose stereo, mono or Separate Audio Pro- gram (SAP broadcast). ◊AUTO PROG. button The TV automatically cycles through all of the avail- able channels and stores them in memory. ±ADD/DEL button Press to add or delete channels in the TV’s memory. ≠DNIe button Activates DNIe (Digital Natural Image engine). –CAPTION button Controls the caption decoder. —SET button Used during set up of this Samsung remote control, so that it wil
Resumen del contenido incluido en la página 10
Wall Installation Instructions This wall mount bracket installation guide is for the following models:HP-P5071 Installation Notes Do not install the PDP on any location other than a vertical wall. 1 To protect the performance of the PDP and prevent problems, avoid the following locations: 2 • Do not install next to smoke and fire detectors. • Do not install in an area subjected to vibration or high voltage. • Do not install near or around any heating apparatus. Use only recommended parts and c
Resumen del contenido incluido en la página 11
How to assemble the Wall Mount Bracket The wall mount comes packaged in 3 parts. These parts must be assembled together. Please tighten the captive screw in the direction of the arrow after assembling 1 the bracket. Install the Wall Mount Bracket after the screws are securely inserted into the wall. Captive Screws ASSY-HINGE (LEFT) Wall Mount Bracket Separate ASSY-HINGE into Left and Right. ASSY-HINGE (RIGHT) After installing the Wall Mount Bracket, After securing the screws, be sure that as
Resumen del contenido incluido en la página 12
Wall Installation Instructions Fixing the PDP panel to the wall attachment panel bracket Remove the screws from the back of the PDP. 1 Connect insulation holders to screws (see the illustration below). 2 • If you are uncertain about installation, hire a specialist to install the wall mount bracket. • Be sure to check that the insulation holders are completely secured on both the left and right side after hanging the PDP on the wall mount bracket. • Be careful to avoid getting your fingers caug
Resumen del contenido incluido en la página 13
How to Adjust Mounting Angle Notice Notice : Please secure the mounting bracket on the wall surface after setting its angle at 0°. Factory default How to Adjust Mounting Angle Please tighten the captive screw in the direction Hold onto the middle of the PDP to adjust of the arrow after assembling the bracket. the angle (not the sides of the PDP). Change Angle Secure the SET to the wall mount bracket. (Please refer to the following instructions.) 1 Set the angle by pulling the upper end of the S
Resumen del contenido incluido en la página 14
Installing the Speakers This speaker installation guide is for the PSN5040 (BN96-00712A) speakers. The speakers are sold separately. Parts Speakers Middle Cabinet Speaker Dust Cover (Wall Mount Only) 1EA 1EA 2EA Speaker Cable Screws 1EA Screw 2EA! Screw 6EA@ How to Assemble the Speakers (Standing) Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides). 1 14
Resumen del contenido incluido en la página 15
Set the Speaker Guide Bracket into the square grooves located on either side of the PDP’s bottom rear, then push the Speaker Guide Bracket towards the center (as the 2 arrow illustrates). Secure the Speaker Guide Bracket with provided screws @. (Always use the proper screws, as indicated.) Screw② Secure the Speaker Dust Cover by setting it into the grooves located on the front side of the speakers. 3 Connect the speakers to the PDP using the speaker cable. The connection terminals are on th
Resumen del contenido incluido en la página 16
Installing the Speakers How to Assemble the Speakers (Wall Mount) Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center). 1 Set the Speaker Guide Bracket into the square grooves located on either side of the PDP’s bottom rear, then push the Speaker Guide Bracket towards the center (as the 2 arrow illustrates). Secure the Speaker Guide Bracket with provided screws @. Secure the Middle Cabinet to the center of the PDP with a screw !. (
