Resumen del contenido incluido en la página 1
LCD TELEVISION
OWNER`S MANUAL
MODELS: LR42T1
LR47T1
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Resumen del contenido incluido en la página 2
Congratulations on your purchase, and welcome to the "" family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier "" family, you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. thanks for investing in a Haier p
Resumen del contenido incluido en la página 3
S H U T T L E OK SCAN TIME.SKIP C CO ON NT TE EN NT T BEFORE OPERATING Warning..............................................................................................................1 Important Safety Instructions..............................................................................2 Buttons and interface location........................................................................... 4 Remote controller ..................................................................
Resumen del contenido incluido en la página 4
Important Safety Instructions Explanation for signs Dear Users: Above all, please accept our sincere appreciation for your choice of Haier TV; and for the sake of making you easier to read instructions and use TV, the company will explain in detail the signs appeared in the instructions as follows: The symbol reminds you that there WARNING may be high voltage here, so please be careful lest you are exposed to RISK OF ELECTRIC SHOCK electric shock. DO NOT OPEN
Resumen del contenido incluido en la página 5
Important Safety Instructions Attentions Inspection Phenomena Dark spots on The TV is manufactured with technology of extra high precision, the screen however there possibly is pixel loss or light spot on the screen sometimes. This is not a problem. Do not make the still pictures display too long because it probably bring permanent burn-in on the TV screen (still pictures include signs, video games, computer figures, electronic texts and the pictures displaying in the mode of 4: 3). Burn-
Resumen del contenido incluido en la página 6
Important Safety Instructions The product should be tightly fixed to avoid To avoid fire hazards, do not use this drop damages and even fire. product under direct sunlight or closely to heat sources. Do not locate the product close to water Unplug the power supply and antenna of the product when there is a rainstorm, or oil, which may cause fire hazards. especially Thunderstorm. Do not use damaged or worn electric plugs Do not connect excessive sockets in parallel and keep electric cord
Resumen del contenido incluido en la página 7
Important Safety Instructions Don't use or store inflammable materials Don't place the product in a humid area to near the product to avoid explosion or fire avoid fire hazards. hazards. Never touch the plug when your hand is wet The antenna of the product should be away as this might cause electric shocks. from electric cable to avoid electric shocks. Always make sure that the televisionis well When antenna is used, measures should be plugged as poor electric taken to prevent water con
Resumen del contenido incluido en la página 8
Buttons and interface location - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Front panel Control TV/AV 1 HDMI jack MENU 2 Right audio VOL+ 3 VOL- Left audio CH+ 4 Video CH- USB jack Remote Sensor Indicator Power 1. TV/AV button 2. MENU button 3. VOL-/+ : Volume decrease/increase,adjusting the menu 4. CH-/+ : Channel number decrease/ increase 5
Resumen del contenido incluido en la página 9
Buttons and interface location Rear panel Control 1 HDMI Input Connnect a signal to HDMI/DVI 2 PC Input Connect the monitor output connector from a PC to the jack 3 Component Input Connect a component video/audiodevice to these jacks. 4 AV1 Input Connect audio/video out from an audio/video device to these jacks. 5 S-Video Input Connect S-Video out from a S-Video device to these jacks. 6 Earphone jack Earphone Audio output terminal 7 Video/Audio output terminal Connect ordinary video/audio or ot
Resumen del contenido incluido en la página 10
Remote controller Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 7# (AAA)alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 2 1 3 Precautions As strong light may interfere the Make sure that two AAA alkaline signals, change your position to batteries are loaded. The batteries must operate the remote controller if be of the same type. The ba
Resumen del contenido incluido en la página 11
H T S U T L E OK SCAN TIME.SKIP Keys of remote control - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction REC(record) Press REC button to start recording Power Off/Standby program, Press REC button to exit any other programmed again. equipment off. USB system buttons (No available) REC TV/AV Input source display RETURN USB (No available) TIME SHIFT USB sys
Resumen del contenido incluido en la página 12
External Equipment Connections - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. outdoor antenna (not supply) Antenna input 75 standard coaxial type 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) (not supply) Note * It is recommended that you'd better use 75 coaxial cable to remove the disturbance caused by airwave. * Don't bind antenna cable and electric wire together. To improv
Resumen del contenido incluido en la página 13
External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR Connection - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Connection Option 1 Set VCR
Resumen del contenido incluido en la página 14
External Equipment Connections DVD Setup How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, as shown in the figure. 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video out
Resumen del contenido incluido en la página 15
External Equipment Connections PC Setup How to connect 1. Use the TV`s PC IN port for video connections. 2. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required. How to use 1. Turn on the PC and the TV. 2. Turn on the display by pressing the POWER button on the TV's remote control. 3. Use TV/AV on the remote control to select VGA source. 4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, cont
Resumen del contenido incluido en la página 16
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE Use the AC polarized
Resumen del contenido incluido en la página 17
Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV`s because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 first, connect power cord correctly and the power indicator will light. 2 Press POWER button on the remote control again. 3 If you want to exchange to standing by status, please press down POWER button on the remote controller. 4 Disconnect the power supply or unplug the television if it is int
Resumen del contenido incluido en la página 18
Searching Channel This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic search menu OK OK OK 1 Press MENU button and then use VOL+/- button to select "" Tuner menu. Note : When the Tuning Lock is setting as Off, it is selectable. 2 Press CH+/- button to select "Auto Search" item. menu
Resumen del contenido incluido en la página 19
Searching Channel Channel Edit menu 1 Press MENU button and then use VOL+/- button to OK OK select "" Tuner menu. OK 2 Press CH+/- button to select "Channel Edit" item. 3 Press VOL+ to enter the submenu. menu 4 Press CH+/- button to select the item to adjust, and Down Up press VOL+/- button to adjust the item to select. Search If excessive channel signal of unwanted programs are received in local area, manual search function is recommended. Press CH+/- button to select Search opti
Resumen del contenido incluido en la página 20
Watching TV Program You can watch TV program in a presetting channel. To select the TV mode Before watching TV program, you may ensure your TV in TV mode. Press TV/AV button to select TV mode. How to select the desired program 1 Using "Program number" buttons. Directly enter the channel number with the numeric keypad on the remote control. If to select channel numbers of double-digit or three-figure ,press continuously the numeric buttons in three second. 2 Using CH+/- button.
