Resumen del contenido incluido en la página 1
PLASMATV
MODELS: RU=42PZ61/71
RU=50PZ61
RU=60PZ61
this manual carefully and completely before
future reference.
and serial number of the TV in the
back cover and relate this
require service.
Resumen del contenido incluido en la página 2
Warning f WARNING WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The fightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is inte
Resumen del contenido incluido en la página 3
Safety Instructions ! lons f Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple precautions discussed in this manual can help yo
Resumen del contenido incluido en la página 4
Safety Instructions Instructions continued f 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards. Refer all servicing to qualified service per- sonnel. built-up static charges. Article 810 of the Nation
Resumen del contenido incluido en la página 5
Introduction Con: Warnings .................................... 2 Auto Clock Setup ....................... 25 Safety Instructions ............................. 3-4 Manual Clock Setup ..................... 25 On/Off Timer Setup ..................... 25 Introduction Sleep Timer / Auto Off .................... 26 Controls ............................... 7 Special Menu Options Connection Options ...................... 8 Key Lock ............................. 27 Remote Control Key Functions .........
Resumen del contenido incluido en la página 6
Introduction o ni What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology. It is currently the best way to achieve flat panel displays with excellent image quality and large screen sizes, that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps. How does it work? PDP is an array of cells, known as pixels, which are comprised of 3 sub pixels, corresponding to the colors
Resumen del contenido incluido en la página 7
Introduction - This is a simplified representation of front panel. Here shown may be somewhat different from your TV. RU-50PZ61 RU-60PZ61 4 78 9 10 11 _,RU-42PZ61 6 8 9 10 11 _, RU-42PZ71 1. ON/OFF Button 6. Remote Control Sensor 2. S-VIDEO Input 7. Power Standby Indicator A connection available to provide better picture quality than Illuminates red in standby mode, Illuminates green when the the video input. TV is turned on. 3. VIDEO Input 8. TVNIDEO or ENTER Button Connects the video signal fr
Resumen del contenido incluido en la página 8
Introduction Options Monitor Output Connect a second TV or Remote Control Port Connect your wired RS-232C IN PUT DVD/DTV Input (Component 1-2) Monitor. I remote control here. (CONTROL/SER- Connect a component video/audio I S-Video Input VICE) PORT device to these jacks. I Connect S-Video out from an S- Connect to the RS- VIDEO device to the S-VIDEO 232C port on a PC. input. I!I i_iii!ii_ii:_iiiii_i:_Milil/!iil!ii/ii!ii/! ...........................................................................
Resumen del contenido incluido en la página 9
Introduction Contro! Key - When using the remote control, aim it at the remote control sensor on the TV. LIGHT / MODE illuminates the remote control buttons. J Selects the remote operating mode: TV, VCR, DVD, CABLE, HDSTB orAUDIO. TV/VlDEO \\ Select other operating modes, for the Selects: TV, Video1-2, Component 1-2, remote to operate external devices. RGB, and DVI input sources.\ j POWER Turns your TV or any other programmed MULTIMEDIA equipment on or off, depending on mode. Selects: Component
Resumen del contenido incluido en la página 10
Installation ! on Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. / l i l l / ;....................... I Batteries Owner's Manual Power Cord Remote Control 4- Bolts (Attach Supporter 2-TV bracket bolts 6-RING SPACER Hanger to monitor-4) 6-Wall mounting bracket bolts (Only RU-42PZ61/71, 50PZ61 sedes) (Only RU-60PZ61 series) (Only RU-42PZ61/71, 50PZ61 sedes) (Only RU-60PZ61 series) 2
Resumen del contenido incluido en la página 11
Installation - Secure the TV assembly by joinning it to a wall by using the TV/Wall brackets. - RU-60PZ61 series TV's stand is saled, separately. - Here shown may be somewhat different from your TV. After the set must be mounted on the desk top, install the TV brackets on the TV as shown. Install the TV brackets on the TV as shown. Insert the 2 bolts and tighten securely, in the upper holes on the bracket. .... ii iIiii ii !i ilil Install the wall brackets on the wall with 4 bolts*, (not supplie
Resumen del contenido incluido en la página 12
Installation • Install the RING SPACER with the bolts on the set as shown. (Only RU-60PZ61 series) 1. Put the RING SPACER in the holes of the bolts before con- 2. When you connect the wall mounting bracket to the set, necting to the wall mounting bracket, connect to it by using the bolts, (supplied with the product), as shown. E quipm ent Connect io ns - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwelli
Resumen del contenido incluido en la página 13
Installation NOTE: All cables shown are not included with the TV To avoid picture noise (interference), leave an adequate distance between the VCR and TV Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. Connection Option 1 Set VCR output switch to 3 or 4 and then t
Resumen del contenido incluido en la página 14
Installation How to connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source by using the TVNIDEO button on the remote control. (If connected to A/V INPUT 1, select Z Video 1 input source). 2. Operate the corresponding external equipment. Refer to external
Resumen del contenido incluido en la página 15
Installation To watch digitally broadcast programs, purchase and connect a digital set-top box. or Digital Set-top Box How to connect Use the TV's COMPONENT (Y, PB, PR) INPUT jacks, RGB or DVI port for video connections, depending on your set-top box connections available. Then, make the corresponding audio connections. Signal Component 1/2 RGB,DVI How to use 480i Yes No 1. Turn on the digital set-top box. (Refer to the owner's manual for the digital 480p Yes Yes set-top box.) 720p Yes Yes 2. Us
Resumen del contenido incluido en la página 16
Operation How to connect 1. To get the best picture quality, adjust the PC graphics card to (RU-42PZ61->1024x768, RU- 42PZ71->852x480, RU-50/60PZ61-> 1366x768), 60Hz. 2. Use the TV's RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector. • If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB INPUT or DVI INPUT to display the PC on the TV. • If the graphic card on the PC does outp
Resumen del contenido incluido en la página 17
Operation Displayable Monitor Specifications RGB / DVI Mode RGB / DVI Mode Horizontal Vertical Horizontal Ve_ical Resolution Resolution Frequency(KHz) Frequency(Hz) Frequency(KHz) Frequency(Hz) 31.468 70.09 31.468 70.09 640x350 640x350 37.861 85.08 37.861 85.08 31.469 70.08 31.469 70.08 720x400 720x400 37.927 85.03 37.927 85.03 31.469 59.94 31.469 59.94 35.000 66.66 35.000 66.66 640x480 37.861 72.80 640x480 37.861 72.80 37.500 75.00 37.500 75.00 43.269 85.00 43.269 85.00 31.500 60.00 31.500 60.0
Resumen del contenido incluido en la página 18
Operation Turning TV On * In this manual, the OSD (On Screen Display) may be different from your TV's because it is just an example to help you with the TV operation. 1. Connect power cord correctly. 2. Press the O ON/OFF button on the TV. At this moment, the TV is switched to standby mode. Press the TV/VlDEO, CH (D / E) button on the TV or press the POWER, TV/VlDEO, MULTIMEDIA, Number (0 ~ 9) button on the remote control and then the TV will turn on. 1. If the TV was turned off with the (i) ON/
Resumen del contenido incluido en la página 19
Operation Menu 0 ptio ns Auto Program should be used to memorize all the active channels in your area before you are able to use the TV. There are two ways of storing channels in the TV's memory. You can use either. One is called AUTO PROGRAM and the other is called MANUAL PROGRAM. In AUTO PROGRAM mode, the TV will memorize the channels in ascending numerical order. If there are additional channels you want to add or delete, you can manually add or delete those channels with Manual Program. - Re
Resumen del contenido incluido en la página 20
Operation Channel Menu Options continued - If TV signal reception is poor because you are in a fringe area, set Booster to On. If the picture condition is good, set Booster to Off. - Adjustments for one channel don't affect the adjustment for other channels. Set booster to on or off for each channel separately. 1. Press the MENU button and then use D / E button to select the CHANNEL menu. 2. Press the G button and then use D i E button to select Manual program. 3. Press the G button and then use
