Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
2 Enfocus Software - Customer Support
Resumen del contenido incluido en la página 3
IMPORTANT SAFETY INSTRUCTIONS The present set had been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated with the present unit will protect you if you observe the following procedures when installation, operating and servicing. The present unit is fully transistorized and does not contain any element that can be repaired by user. Read Before Operating Equipment 1. Keep these instructions. 2. Read all wa
Resumen del contenido incluido en la página 4
16. Damage Requiring Service – The appliance should be serviced by qualified service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 17. Tilt/Stability – All televisions must comply wit
Resumen del contenido incluido en la página 5
TABLE OF CONTENT INSTRODUCTION WELCOME/REGISTRATION OF YOUR TV ---------------------------------------------------------------- 2 IMPORTANT SAFETY INSTRUCTIONS -------------------------------------------------------------------- 3 TABLE OF CONTENT -------------------------------------------------------------------------------------------- 5 INSTALLATION PRESENTATION OF THE LCD TV --------------------------------------------------------------------------- 6-7 SUPPLIED ACCESSORIES -----------
Resumen del contenido incluido en la página 6
INSTALLATION PRESENTATION OF THE LCD TV Front Panel Control Knobs Source Key Press to select your input source. Press to confirm your function selection and adjust the volume > or < Key or Key Press to confirm your function selection and adjust TV channel Press to show the OSD menu and exit OSD menu at the TV. MENU Key Power Key Press to turn on or off the TV. 6 Enfocus Software - Customer Support
Resumen del contenido incluido en la página 7
Preparation Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution not to damage the screen. TV input Earphone jack Audio Right /Left Channel input Audio R/L COMP VIDEO Video Input S-VIDEO S-VIDEO Input D-SUB PC Input DC IN 12V DC Power Input 7 Enfocus Software - Customer Support English
Resumen del contenido incluido en la página 8
SUPPLIED ACCESSORIES Power adapter Remote control Quick Setup Guide Owner’s Manual Warrant Card 8 Enfocus Software - Customer Support
Resumen del contenido incluido en la página 9
REMOTE CONTROL OPERATION POWER button DISPLAY button Press to "Display” channel Press to turn on/off the TV number on CHANNEL button MUTE button Press to adjust the channel up or Press to eliminate or restore the down. LCD VOLUME button NUMBER button Press to adjust the sound level Press to select TV channels PC button R button Press to display the previously Press to switch on your PC signal. selected TV channel TV/VIDEO button SLEEP button Press to set the LCD TV to turn off Select y
Resumen del contenido incluido en la página 10
INSTALLING LCD TV ON THE WALL Before you can install your LCD TV on the wall, you MUST first remove the base using the steps below: 1. Place the set facing down on a flat surface with a protective sheet or cloth the TV. 2. Remove two screws from the base, grasp the base and pull it out. When installing the LCD TV on the wall, please consult a professional technician for proper installing. The manufacture accepts no liability for installations not performed by professional technician. 10
Resumen del contenido incluido en la página 11
GETTING STARTED 1. Place the TV on a sturdy surface. Note: Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2. Connect the antenna to the TV jack on
Resumen del contenido incluido en la página 12
OSD SETTING 1. Press “MENU’’ key to open OSD menu 2. Press > or < key to select “OSD Setup’’ option 3. Press or key to select submenu OSD Setup Language 1. Press or key to select “Language” option 2. Press > or < key to select language There are three kinds of language to select :English French and Spanish 3. After adjustment, press “MENU” key to exit or press or key to adjust other options H_Position 1. Press or key to select “H Position” option 2. Press > or < key to a
Resumen del contenido incluido en la página 13
CONNECT VIDEO RECORDER How to connect: 1. Connect the antenna to VCR RF input 2. Connect the other RF cable from VCR output to TV input port ( ); if you connect the VCR to TV’s AV input port (COMP VIDEO), you will get the better quality of video and audio 3. TV’s AV input does not include audio; please connect VCR audio output to TV’s audio input at AUDIO L/R If your VCR is equipped with S-VHS video port: For better picture quality, connect an S-Video signal with the S-VIDEO inp
Resumen del contenido incluido en la página 14
CONNECT DVD PLAYER 1. Connect the video output port of DVD player to the AV input port (COMP VIDEO) of TV 2. Connect the left and right audio channels of DVD to the left and right channels of audio input at AUDIO L/R of TV If your DVD player is equipped with S-VHS video port: For better picture quality, please connect the S-Video cable to the S-Video input of TV. Connect the left and right channels of DVD to the left and right channels of audio input at AUDIO L/R of TV How to play If you
Resumen del contenido incluido en la página 15
TV SETUP MENU 1 Press” MENU’’ key to open OSD menu 2 Press > or < key to select “TV Setup’’ option 3 Press or key to select submenu Note: Air/Cable, Auto Scan, Current Program Sleep Timer options can only display on TV Source TV CHANNEL INSTALLATION Air/Cable 1. Press” MENU’’ key to open OSD menu 2. Press > or < key to select “TV Setup’’ option 3. Press or key to select “AIR/CATV” option 4. Press > or < key to select the automatic search system that your TV need, there are four
Resumen del contenido incluido en la página 16
CHANNEL EDIT Add/Erase 1. Press” MENU’’ key to open OSD menu 2. Press > or < key to select “TV Setup’’ option 3. Press or key to select “Add/Erase” option 4. Press > or < key to select Add or Erase. 5. Press “MENU” key to exit Add/Erase menu or press or key to adjust other options Current Program Current program is the channel set by the current TV, you can press “DISPLAY” key to display the current channel on the top right of the screen. 1. Press” MENU’’ key to open OSD menu 2.
Resumen del contenido incluido en la página 17
CLOSED CAPTION 1. Press “ MENU’’ key to open OSD menu 2. Press > or < key to select “TV SETUP’’ option 3. Press or key to select “Closed Caption” option 4. Press > or
Resumen del contenido incluido en la página 18
Press digital keys on the remote control; enter the password to go into V-CHIP control menu (Default pass code for V-Chip: 0711 and should press twice time) If your password is error, then the screen will display “PIN ERROR”. 5. After enter the V-CHIP menu, press or key to select, if you want to set V_CHIP, you need to set the “Status” on the condition of “ON”. 1) Press or key to select “Status’’ option 2) Press > or < key to select “ON’’ or “OFF” 6. TV Guidelines Setting 1) Pre
Resumen del contenido incluido en la página 19
7. Movie Guidelines Setting 1) Press or key to select “Movie Guidelines” option. 2) Press > or < key to enter Movie Guidelines menu. 3) Press or key to select block item. 4) Press > or < key to select U or B, selecting U means “Unlock”, selecting B means “Block”. 5) If the setting is OK, press “MENU” key to exit Movie Guidelines menu. 8. Change PIN 1) Press or key to select “Change PIN” option 2) Press > or < key to enter Change PIN menu. 3) Press digital keys on the remote contro
Resumen del contenido incluido en la página 20
Reset To Default 1. Press “MENU” key to open OSD menu. 2. Press > or < key to select any Setup options 3. Press or key to select “Reset To Default” option. 4. Press > or < key to reset. Reset To Default is convenient for all settings in the user OSD to recall to factory default data. Note: The reset to default function in each function item is the same under the signal source of AV/TV/S-VIDEO. When we select the Reset To Default in each function item under the PC signal source, it n
