Resumen del contenido incluido en la página 1
Q u i c k U se a n d H o o k u p G u i d e
Q u i c k Use a n d H o o ku p G u i d e
CONTENTS
INSTALLING LCD TV ON THE WALL . . 1
VCR, DVD PLAYER, OR OTHER DEVICES
IMPORT ANT
TV CHANNEL INSTALLATION . . . . . . . . 2
WITH RCA CONNECTORS . . . . . . . . . 7
NOTE: This quick setup guide is used with several
PRESENTATION OF THE LCD TV.. . . . . 2
DVD PLAYER OR OTHER VIDEO DEVICES
different LCD TV models. Not all features (and drawings)
ACCESSORIES. . . . . . . . . . . . . . . . . . . . 3
WITH C
Resumen del contenido incluido en la página 2
TV CHANNEL INSTALLATION Q u i c k Use a n d H o o k u p G u i d e Immediately after unpacking and plugging in your new television, run the auto program function to set up the TV for the broadcast or cable channels available in your area. If you do not run the auto program function to set up the channels , your television may not operate properly. Please follow these steps to install TV channels: M A I N C O N T R O L S P I C T U R E L A N G U A G E A U D I O A U T O P R O G R A M Select a TV s
Resumen del contenido incluido en la página 3
ACCESSORIES BATTERY INSTALLATION When you unpack this unit, make sure it includes the Remove the battery compartment lid on 1 the bottom of the remote control. following: Place two AAA batteries in the remote. 2 Be sure the (+) and (-) ends of the batteries line up as marked inside the battery compartment. 2 1 Reattach the battery Power cable Owner`s Manual & Quick Use and Hookup Guide Tuner L-Adapter Warranty Card compartment lid. 3 3 Power cable Owner`s Manual & Quick Use and Hookup Gui
Resumen del contenido incluido en la página 4
ANTENNA TV A combination antenna receives normal broadcast channels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only one 75 Ω (ohm) antenna jack on the side of your TV, and that’s where the antenna goes. If your antenna has a round cable (75 ohm) on the end, then T w i n-l e ad w i r e O ut d o o r o r Ind o o r A nt e nna 1 you’re ready to connect it to the LCD TV. If your antenna t o 300-75 Ω ad pt e r ( C o m bi na t i o n V H F / U H F ) has fl at, twin-lead wire (30
Resumen del contenido incluido en la página 5
AUTO PROGRAM (SETTING UP CHANNELS) Your LCD TV can automatically set itself for local area (or cable TV) channels. This makes it easy for you to select only the TV stations in your area by pressing the CH(+) or CH(-) button. M A I N C O N T R O L S Press the MENU button on the remote control to show the P I C T U R E LANGUAGE 1 onscreen menu. A U D I O AUTO PROGRAM MANUAL STORE A/CH F E A T U R E S CHANNEL SETTING I N S T A L L Press the CURSOR DOWN button to FACTORY RESET 2 highlight th
Resumen del contenido incluido en la página 6
CABLE BOX (WITH RF IN / OUTPUTS): Connect the Cable TV signal to the IN jack (or RF IN or CABLE 1 IN) on the Cable Box. Connect an RF coaxial cable (not supplied) to the OUT jack (or 4 2 TO TV or RF OUT) of the Cable Box. Connect the other end of the coaxial cable to one end of the W all o u t let 3 supplied L-Adapter as shown, and connect the other end of the 3 adapter to the TV jack on the LCD TV. Plug the power cable into AC inlet on LCD TV set. Plug the Th e C ab l e T V si n ga l f r
Resumen del contenido incluido en la página 7
VCR, DVD PLAYER, OR OTHER DEVICES WITH RCA CONNECTORS The AV IN jacks on the rear of the LCD TV enable quick connections of other equipment. Connect a DVD player, VCR Video Game, Camcorder, etc., to these jacks. To view the 2 material playing on the other equipment, set the LCD TV to its AV mode. Wall outlet Using an RCA-type Video and Audio cable (usually marked yellow, red, and white), connect the VCR’s Video and Audio Out jacks to the TV’s 1 Video and Audio In jacks. Plug the power cabl
Resumen del contenido incluido en la página 8
DIGITAL TV RECEIVER, OR A DIGITAL SATELLITE RECEIVER WITH HD (HIGH DEFINITION) OUTPUT A Digital TV Receiver or a Digital Satellite Receiver is able to produces HD (High Defi nition) video signal with 480p, 576p, 720p, and 1080i formats. A Component (Y Pb, Pr) Connection is required for this kind of setup. Note: This setup also support 480i/576i. Using a Component Video cable, connect the Digital TV Receiver’s 1 Y, Pb, Pr jacks to the Y, Pb, Pr jacks on the TV. Use the HD IN 3 connections
Resumen del contenido incluido en la página 9
DIGITAL SATELLITE RECEIVER WITH DVI CONNECTOR Your LCD TV offers Digital Video Interface (DVI) with High Defi nition Copy Protection (HDCP) connections. This feature allows a digital connection between set-top boxes and the LCD TV, creating a more vibrant image. DVI HDCP technology allows content provid- ers the ability to utilize the full bandwidth of high defi nition signals. 2 Disconnect all power sources before making any connections. Connect the digital DVI output of your HD 1 device
Resumen del contenido incluido en la página 10
AV OUTPUT T he AV (Audio/Video) out jacks are great for recording with a VCR or used to connect an external audio system for better audio. 3 Disconnect all power sources before making any connections. 1 For VCR Connection/Recorder: Connect one end of the yellow Video Cable to the 2 1 VIDEO jack of AV OUT connection. Connect the other end to the VIDEO IN jack on the VCR. Connect one end of the red and white Audio Cable from the L and R AUDIO jack of AV OUT 2 connection to the AUDIO IN jac
