Resumen del contenido incluido en la página 1
PLASMA TELEVISION
TÉLÉVISEUR PLASMA
PLASMA-FERNSEHER
PDP-4270XA
TELEVISORE AL PLASMA
PLASMA-TELEVISIE
TELEVISOR DE PLASMA
Discover the benefits of registering your product online at www.pioneer.co.uk
(www.pioneer-eur.com)
Découvrez les nombreux avantages offerts en enregistrant votre produit en ligne
maintenant sur www.pioneer.fr (ou www.pioneer-eur.com).
Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres Produktes unter
www.pioneer.de (oder www.pioneer-eur.com)
Registra il tuo prodotto
Resumen del contenido incluido en la página 2
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. The cut-off plug should be disposed of and must not be The wire which is coloured brown must be connected to inserted into any 13 amp socket as this can result in the terminal which is marked with the letter L or coloured IMPORTANT electric shock. The plug or adaptor or the distribution red. panel should be provided with 13 A fuse. As the colours of FOR USE IN THE
Resumen del contenido incluido en la página 3
WARNING The following symbols are found on labels attached This equipment is not waterproof. To prevent a fire or shock to the product. They alert the operators and service hazard, do not place any container filed with liquid near this personnel of this equipment to any potentially equipment (such as a vase or flower pot) or expose it to dangerous conditions. dripping, splashing, rain or moisture. D3-4-2-1-3_A_En WARNING This product complies with the Low Voltage Directive (73/23/EEC, amended by
Resumen del contenido incluido en la página 4
Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries of regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit are the same. Contents 01 Important user info
Resumen del contenido incluido en la página 5
English Contents Entering a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Changing the password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Resetting the password function . . . . . . . . . . . . . . . . . . . . . . . . . 37 Disabling the password function . . . . . . . . . . . . . . . . . . . . . . . . . 37 10 Using with other equipment Connecting a DVD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 DVD playback
Resumen del contenido incluido en la página 6
01 Important user information Chapter 1 Important user information In order to obtain maximum enjoyment from this Pioneer PureVision Installation guidelines PDP-4270XA Plasma Television, please first read this information The Pioneer PureVision PDP-4270XA Plasma Television incorporates a carefully. very thin design. To ensure safety, please take the proper measures to mount or install the plasma television, in order to prevent the unit from With the Pioneer PureVision PDP-4270XA, you can be
Resumen del contenido incluido en la página 7
English Important user information 01 Plasma television protection function Do not attach such items as labels and tape to the product. When still images (such as photos and computer images) stay on the This may result in the discolouration or scratch of the cabinet. screen for an extended period of time, the screen will be slightly dimmed. This is because the protection function of the plasma When not using the product for a long period of time television automatically adjusts the brightness
Resumen del contenido incluido en la página 8
01 Important user information Caution Panel sticking and after-image lag Displaying the same images such as still images for a long time may cause after-image lagging. This may occur in the following two cases. After-image lagging due to remaining electrical load When image patterns with very high peak luminance are displayed for more than 1 minute, after-image lagging may occur due to the remaining electric load. The after-images remaining on the screen will disappear when moving images ar
Resumen del contenido incluido en la página 9
English Safety precautions 02 Chapter 2 Safety precautions Electricity is used to perform many useful functions, but it can also 13. The plasma television used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be cause personal injuries and property damage if improperly handled. careful not to be injured by broken glass pieces in case the plasma This product has been engineered and manufactured with the highest television breaks. p
Resumen del contenido incluido en la página 10
02 Safety precautions Installation precautions Caution Be sure to use four or more mounting holes symmetrical to the Observe the following precautions when installing with any items such vertical and horizontal median lines. as the optional stand. Use M8 screws, which go 12 to 18 mm in depth from the mounting surface of the plasma television. See the side view above. When using the optional stand, brackets, or equivalent items Be careful not to block the ventilation opening at the rear
Resumen del contenido incluido en la página 11
English Supplied accessories 03 Chapter 3 Supplied accessories Check that all of the following accessories are supplied in the box. Power cable Only the power cable appropriate for your country or region is supplied: Remote control For Europe, except UK and Republic of Ireland AA size batteries x 2 For UK and Republic of Ireland Ferrite core Cable tie (for ferrite core) Speed clamps x 3 Bead bands x 3 Cleaning cloth Warranty card Operating instructions x 2 Hexagonal wrench (Diagonal size :
Resumen del contenido incluido en la página 12
04 Part names Chapter 4 Part names Plasma television (front) Side Front Side 6 10 7 8 INPUT 4 11 9 12 13 2 3 4 POWER ON STANDBY SLEEP 1 5 Viewed from the underside of the display Viewed from the front of the display 1POWER button 2 POWER ON indicator 3 STANDBY indicator 4 SLEEP indicator 5 Remote control sensor 6 STANDBY/ON button 7 INPUT button 8VOLUME +/– buttons 9 CHANNEL +/– buttons 10 PHONES output terminal 11 INPUT 4 terminal (S-VIDEO) 12 INPUT 4 terminal (VIDEO) 13 INPUT 4 terminal
Resumen del contenido incluido en la página 13
English Part names 04 Plasma television (rear) Rear 6 7 8 9 1 3 5 2 3 4 1 AC IN terminal 2 INPUT 3 terminal (HDMI) 3 RS-232C terminal (used for factory setup) 4 ANT (Antenna) input terminal 5 INPUT 1 terminal (SCART) 6 INPUT 2 terminal (SCART) 7 INPUT 3 terminal (SCART) 8 INPUT 2 terminal (COMPONENT VIDEO: Y, P , P ) B R 9 AUDIO OUTPUT terminals 13 En
Resumen del contenido incluido en la página 14
04 Part names 5P+/P– Remote control unit TV/External input mode: Selects a channel. Point the remote control at the plasma television to operate. w/x TELETEXT mode: Selects a page. 6 g Sets the sound multiplex mode. 1 7 RETURN Restores the previous menu screen. 2 12 8 /// 13 Selects a desired item on the setting screen. ENTER 3 Executes a command. 9 Colour (RED/GREEN/YELLOW/BLUE) TELETEXT mode: Selects a page. 4 10 [ TV/External input mode: Jumps to the Teletext subtitle page. 5 14 11 k 15 6
Resumen del contenido incluido en la página 15
English Preparation 05 Chapter 5 Preparation Installing the plasma television Moving the plasma television When installing on a rack, etc., hold the plasma television as shown below. Over 50 cm Over 10 cm Location Avoid direct sunlight. Maintain adequate ventilation. Because the plasma television is heavy, be sure to have someone help you when moving it. Caution If you do not leave sufficient space above the plasma television, it will not receive enough ventilation and will not operate
Resumen del contenido incluido en la página 16
05 Preparation Using a wall for stabilization Preventing the plasma television from falling over 1 Attach falling prevention bolts (hooks) to the plasma television. After installing the stand, be sure to take special care to ensure that 2 Use strong cords to stabilize it appropriately and firmly to a the plasma television will not fall over. wall, pillar, or other sturdy element. Perform this work in the same way on the left and right sides. Stabilizing on a table or floor Use hooks, cords a
Resumen del contenido incluido en la página 17
English Preparation 05 2 Loosen and remove the two installation bolts (2) using the supplied hexagonal wrench. Installation bolts (2) (M8 x 60 mm: silver) Line up the column supports with the bottom of the plasma television, as indicated in the 3 Remove the plasma television from the stand. accompanying diagram. 2 Attach the plasma television at the points indicated by the arrows and tighten the installation bolts (2) firmly using the supplied hexagonal wrench. Installation bolts (2) (M8 x
Resumen del contenido incluido en la página 18
05 Preparation Routing cables Basic connections Use the speed clamps as necessary to route the connecting cables. cables. The diagrams below show the location of the holes on the rear of the plasma television. Connecting the antenna To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. Attaching and removing speed clamps Insert [1] into an appropriate hole on the rear of the plasma television a
Resumen del contenido incluido en la página 19
English Preparation 05 3 Close the battery cover. Note Disconnect the power cord from the power outlet when the plasma television is not going to be used for a long period of time. Connecting the power cord Rear view Caution Improper use of batteries can result in chemical leakage or an explosion. Be sure to follow the instructions below. When you replace the batteries, use manganese or alkaline ones. Europe, except UK and Place the batteries with their terminals corresponding to the (
Resumen del contenido incluido en la página 20
05 Preparation Caution Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit. The remote control unit may not work properly if the remote control sensor of the plasma television is under direct sunlight or strong lighting. In such case, change the angle of the lighting
