Resumen del contenido incluido en la página 1
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
Resumen del contenido incluido en la página 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. If the LodgeNet system is already installed at your location, you do not need to install the LodgeNet Set-
Resumen del contenido incluido en la página 3
Contents y Introduction .............................................................................................................................................................. 2 y Operational Modes ................................................................................................................................................... 2 y Still image warning ...........................................................................................................................
Resumen del contenido incluido en la página 4
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ color and shape may vary, depending on the model. ✎ The parts for the stand are listed under Stand Components on the following page. List of Parts y Remote Control (AA59-00817A) & y Safety Guide / Quick Setup Guide y Power Cord Batteries (AAA x 2) (Not available in all locations) y Hotel Mount Kit y Holder Ring (2EA) (46" only) y Holder-Wire stand y Asse
Resumen del contenido incluido en la página 5
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right. See page 6. Components When installing the stand, use the provided components and parts. C D x7 (M4 X L12) B 1 EA A 1 EA or or x8 (M4 X L12, for 40" and above models) y Security Screws (3EA) y Stand (differs depending y Guide Stand y Screws (4EA, for 40" and above on the model) mod
Resumen del contenido incluido en la página 6
Assembling the swivel stand (32 inch TVs or larger) The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL. ¦ 20° swivel To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand
Resumen del contenido incluido en la página 7
¦ Hotel Mount Kit Bolt + Nut Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA) Top Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center Bottom as shown. WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions. English 7
Resumen del contenido incluido en la página 8
Using the TV's Controller The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control. Selecting the Media Play Selecting the Menu Selecting a Source Function menu TV Controller Return The image is drawn as if Remote control sensor you are facing the front side of the TV. Power off ✎ The product color and shape may vary depending on the model. ✎ To exit the menu, press the Controller for more than 1 second. ✎ When se
Resumen del contenido incluido en la página 9
VIDEO AUDIO The Connection Panel HDMI IN 2 1 (DVI) 9 HOSPITALITY TV 1 HDMI IN 1 HDMI IN 1 3 (ARC) GAME DVI AUDIO IN CONTROL DATA USB (5V 0.5A) 2 / CLONING AV IN EX-LINK DIGITAL AUDIO OUT (OPTICAL) 3 AUDIO OUT ANT IN AIR/CABLE 4 5 6 7 8 ✎ Whenever you connect an external device to your TV, make sure that the TV and the device are turned off. ✎ When connecting an external device, match the color of the connection terminal to the cable. 1 HDMI IN 1, 2 (DVI), 3 (ARC) : Connects to the HDMI jack of
Resumen del contenido incluido en la página 10
Using the TV's Controller POWER Turns the TV on and off. Display and select the available video sources. Press to access channels directly. Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press Return to the previous channel. ‘54’, then press '-' and ‘3’. Cut off the sound temporarily. Change channels. Adjust the volume. HOME: Display the REACH menu if REACH Display the channel list on the screen. has been downloaded t
Resumen del contenido incluido en la página 11
Connecting the TV to the Lodgenet game controller or a STB of a SI vendor TV Rear Panel ETH MODEM Data Cable GAME CONTROL DATA or Game Controller TV Rear Panel GAME CONTROL DATA Data Cable 1. Connect the LodgeNet game controller to the TV’s GAME CONTROLLER/DATA jack. 2. Connect the GAME CONTROLLER/DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type. English 11
Resumen del contenido incluido en la página 12
¦ List of SI Vendors and Compatible Data Cables Supplied with the TV y Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. y Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Confirm the code on the Code Label Note the labeled end. Note the labeled end. SI Vendor Cable code Pin assign Remark Samsung OCC BN39-00865B Provided Enseo Guest-Tek NXTV BN39-01011B nStreams BN39-01110A LodgeNet MTI MTI BN
Resumen del contenido incluido en la página 13
¦ Connecting the Audio Output to an Audio Amplifier Audio AUDIO IN Amplifier TV Rear Panel EX EX-LIN -LINK K AUDIO OUT 1 Stereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. English 13
Resumen del contenido incluido en la página 14
VIDEO AUDIO RS/232 Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. 3 HDMI cable TV Rear Panel USB HDMI S-VIDEO RCA AUDIO/PC HDMI IN 2 (DVI) RJP Rear HDMI IN 1 HDMI IN 3 (ARC) 1 PC Audio cable DVI AUDIO IN US USB B (5V 0.5A (5V 0.5A) ) / / CL CLONING ONING AV IN EX-LINK D DIGI IGIT TA AL L AU AUDIO OUT DIO OUT 2 V ideo / Audio Cable ( (O OPTICA PTICAL L) ) AU AUDIO DIO O OUT UT 4 1. Connect the
Resumen del contenido incluido en la página 15
y RJP (Remote Jack Pack): The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/Inactive sources. – A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. (See page 18). 1 is the highest priority and 3 is the lowest. W
Resumen del contenido incluido en la página 16
Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the menus are listed below. Menu items in the Stand-alone mode only: – SI Vendor : Smoovie – REACH Server and its submenus. Menu items in the Interactive mode only: – SI Vendor: Samsung and other vendors. All other items appear in both menus. To access the menus, press MUTE → 1 → 1 →
Resumen del contenido incluido en la página 17
¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Menu Item initial Value Description Select Hospitality mode. Hospitality Hospitality y Interactive mode : TV works with an SI STB or SBB. Interactive Mode Mode y Stand-alone mode : TV works alone, without an SI STB or SBB. y Interactive mode : Samsung / OCC / MT
Resumen del contenido incluido en la página 18
Menu Item initial Value Description Turning the front panel (local key) operations on/off. y Unlock : Unlocks all panel keys. Panel Button y Lock : Locks all panel keys. Operation Unlock Lock y OnlyPower : Locks all panel keys except the Power panel key. y Menu/Source : Locks the Menu and Source panel keys. Select the way to update clock data. Use clock data from a DTV channel to set the clock automatically or set the clock manually when Clock Local Time Manual the TV is in stand-alone mode. A
Resumen del contenido incluido en la página 19
Menu Item initial Value Description Adjusts the brightness of the TV to reduce power consumption. y Off : Turns off the energy saving function. y Low : Sets the TV to low energy saving mode. Eco Solution Energy Saving OFF y Medium : Sets the TV to medium energy saving mode. y High : Sets the TV to high energy saving mode. Welcome Displays a the Welcome Message for 5 seconds when the TV turns On. See Page 21. OFF Message Edit Welcome Edits the Welcome Message. Message Turns the Hospitality log
Resumen del contenido incluido en la página 20
Menu Item initial Value Description Configures CAS support. Applies to only the NB673, NB677, and NB678 models. OFF : Turns off CAS support. CAS Pro:idiom LYNK DRM : Select to turn on S-LYNK DRM CAS support only. Pro:idiom : Select to turn on Pro:Idim CAS support only. LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS. Enter Self Diagnosis Menu. y Picture Test: Use to check for picture problems. If the problem appears in the test picture, select YES, and then follow t
