Resumen del contenido incluido en la página 1
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model Serial No.
[HG890_ZA]Install_Guide-00ENG.indd 1 2013-04-12 5:30:34
Resumen del contenido incluido en la página 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV has functionality that lets it interact with a set-back box (SBB/STB) and with other TVs in a computer-controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the connected SBB/STB. If it identifi
Resumen del contenido incluido en la página 3
ENGLISH Contents y Introduction .............................................................................................................................................................. 2 y Operational Modes ................................................................................................................................................... 2 y Still image warning ...................................................................................................................
Resumen del contenido incluido en la página 4
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ color and shape may vary, depending on the model. ✎ The parts for the stand are listed under Stand Components on the following page. y Remote Control (AA59-00817A) & Batteries (AAA x 2) y Power Cord y Smart Touch Control (AA59-00830A) & Batteries (AAA x 2) y Data Cable (BN39-00865B, BN39-01011C) y Owner’s Instructions y Warranty card / Safety Guide
Resumen del contenido incluido en la página 5
Installing the LED TV Stand Components When installing the stand, use the provided components and parts. L R A B C x8 (M4 X L12) 1 EA 2 EA y y y Stand (depending on the model) Guide Stand Screws 1 2 3 4 C x4 (M4 X L12) ✎ Lay the TV on a soft surface, screen side down. ✎ Use the packing material to protect the screen. 5 C x4 (M4 X L12) 6 ✎ NOTE y Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them. y Make sure that at least two people lift and
Resumen del contenido incluido en la página 6
TV MIC STB SOURCE VOICE CH VOL MORE HOME SLEEP LIGHT ALARM MENU RETURN GUIDE EXIT SMART HUB Using the TV's Controller ✎ The color and shape of the TV Controller may vary depending on the model. ✎ The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. Open Smart Hub. Open the menu. mR Select a source. P Turn off the TV. TV Controller The control stick is located at the lower-left corner on the back of the TV. Re
Resumen del contenido incluido en la página 7
The Connection Panel VARIABLE 1 AUDIO OUT VOL-CTRL 2 3 (HDD 5V 1A) 4 AUDIO 5 OUT DVI 6 AUDIO IN HDMI IN 3 7 HDMI IN 1 (ARC) AIR/CABLE EXRJ -LIN P K DATA 87 90 !@ ✎ Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ✎ When connecting an external device, match the color of the connection terminal to the cable. 1 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (
Resumen del contenido incluido en la página 8
7 HDMI IN 1 (ARC), 2 (DVI), 3: Connects to the HDMI jack of a device with an HDMI output. ✎ No sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video. ✎ Use the HDMI IN 2(DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio. 8 EX-LINK: The EX-LINK connection is for service only. 9 DATA – Used to support data communication be
Resumen del contenido incluido en la página 9
The Remote Control Remote Control (AA59-00817A) ✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers. Display and select the available video Turns the TV on and off. sources. Press to directly access channels. Press to select additional digital channels being broadcast by the same station. For Return to the previous channel. example, to select channel ‘54-3’, press ‘54’, then press '-' and ‘3’. Cut off the sound t
Resumen del contenido incluido en la página 10
Installing batteries (Battery size: AAA) Match the polarity of the batteries to the symbols in the battery compartment. After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed. NOTE ✎ • Use the remote control within 23~33 feet of the TV. • Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs. • The color and shape of the remote may vary depending on the model. English 10
Resumen del contenido incluido en la página 11
MUTE MUTE Using the Smart Touch Control Smart Touch Control (AA59-00830A) ✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers. Use Voice Recognition function with the microphone embedded in remote Not Available control. The Voice Recognition function ✎ can be affected by unclear pronunciation, voice level, or surrounding noise. TV STB MIC Turns the TV on and off. VOICE Take your voice command and SOURCE enter a
Resumen del contenido incluido en la página 12
Connecting to the TV In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV. 1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the P button. The remote control receiver's location may vary depending on the model. 2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt
Resumen del contenido incluido en la página 13
Reconnecting the Smart Touch Control If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing button at the back of the Smart Touch Control, pointing at the remote control sensor of the TV. The pairing button can be accessed by removing the Smart Touch Control's battery cover. Pressing the pairing button automatically reestablishes the connection between the Smart Touch Control and the TV. Low Battery Pow
Resumen del contenido incluido en la página 14
Using the touch pad Use the touch pad to implement various commands. Navigate to Tutorial (System > Device Manager > Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control. Dragging Tap HOME HOME HOME HOME HOME HOME Press the touch pad to select the item highlighted or in focus. Drag on the touch pad to move the focus, pointer, or highlight in the When watching TV, press and hold the touch pad for 2 seconds displays direction the finger is draggin
Resumen del contenido incluido en la página 15
Using the Virtual Remote Panel Press the MORE button to display the virtual remote panel on the TV screen. The virtual remote panel consists of the number panel, a playback control panel, and the quick access panel. Use the touch pad to highlight and select icons, numbers, and buttons on the panels. ✎ The displayed virtual remote panel on the TV screen may differ depending on the country. Channel History ALARM SLEEP INFO STATUS S PIP No Channel numbers TOOLS have been saved. P.Size Web Bro
Resumen del contenido incluido en la página 16
Connecting to the Network You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection. ✎ After you have “physically” connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection during the Initial Setup process (see page 35) or after the Initial Setup process, through the TV’s menu. Network Connection - Wireless You can connect your TV
Resumen del contenido incluido en la página 17
Network Connection - Wired There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below: External Modem The Modem Port on the Wall TV Rear Panel (ADSL / VDSL / Cable TV) Modem Cable (Not Supplied) LAN Cable (Not Supplied) The Modem Port on the Wall TV Rear Panel External Modem IP Router that has a (ADSL / VDSL / Cable TV) DHCP Server Modem Cable LAN Cable LAN Cable (Not Supplied) (Not Supplied) (Not Supplied) The LAN Port
Resumen del contenido incluido en la página 18
Connecting the TV to an SBB or STB ETH MODEM Data Cable TV Rear Panel DA DA DATTA TA A 1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable. ✎ Use data communication. ¦ Connecting the Audio Output to an Audio Amplifier TV Rear Panel AUDIO IN AUDIO A AUDIO UDIO OUT OUT OUT 1 Stereo cable Audio DV DVI I A AUDI UDIO IN O IN Amplifier HD HDMI IN MI IN 3 3 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo c
Resumen del contenido incluido en la página 19
¦ List of Vendors and Compatible Data Cables Supplied with the TV y Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables. English 19 [HG890_ZA]Install_Guide-00ENG.indd 19 2013-04-12 5:30:41
Resumen del contenido incluido en la página 20
Connecting the Bathroom Speakers You can connect the Bathroom Speakers using the following method. ¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 1 V V VA ARIABLE ARIABLE RIABLE Speaker A A AUDIO OUT UDI UDIO OUT O OUT VO VO VOL- L- L-C C CTRL TRL TRL ( (HDD 5V 1A HDD 5V 1A) ) 2 VOL+ Volume Control Box VOL- 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C 2. Connect the VOL-CTRL
