Manual de instrucciones de Edelbrock 29086

Resumen del contenido incluido en la página 1

Victor Jr. LS1 EFI Intake Manifold
for GM 5.7L LS1 Style V8 Engines
Catalog #29085 & #29086
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before installing your new Intake Manifold. If you have any questions or problems, do not
hesitate to contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm PST, Mon-Fri, or via e-mail at:
Edelbrock@Edelbrock.com. Please fill out and mail your warranty card. Remember to include the model number of this product
in the “Part #___

Resumen del contenido incluido en la página 2

• INSTALLATION PROCEDURE: 1. (Note: Use only original equipment (GM P/N 12533587) O-Ring type gaskets when installing this intake manifold). No gasket sealer is required when using the OEM type gaskets. Using the supplied 6mm x 50mm hex head bolts and 1/4” AN washers, mount the manifold to the engine. The Gen III throttle bracket mounts under the two left side rear intake manifold bolts. Following the torque sequence in Figure 1, torque all manifold bolts to 11 ft/lbs. 2. Select the appropri